Dissertation > Excellent graduate degree dissertation topics show

The Study on the Pressure and Flow Transimission Characteristics of Hydraulic Long-pipeline Valve-controlling Cylinder System

Author: HeLi
Tutor: YuHongYun; XiaYiMin
School: Central South University
Course: Mechanical Engineering
Keywords: long pipeline the amplitude-frequency characteristics of pressureratio pipeline effect AMESim simulation
CLC: TH137.5
Type: Master's thesis
Year: 2012
Downloads: 240
Quote: 0
Read: Download Dissertation

Abstract


In the paper, valve controlling cylinder system with a single thrust cylinder was selected as the research object. The transmission characteristics of system pressure and flow time-frequency domain were analyzed from the theory, simulation, experiment three level. Mainly research from the following aspects:The main research work include the following aspects:1. When the fluid transfering in the pipeline, considering the fluid linear friction characteristics, the amplitude-frequency characteristics models of pipeline inlet and outlet pressure transmission ratio were established. Through the MATLAB programming, the impact law of pipeline pressure transmission in different pipeline diameter, length and fluid parameters was solved;2. The simulation model of the shield hydraulic long pipeline test bed was built with AMESim software. The proportional relief valve and the proportional flow regulator valve model was built with HCD library, secondly, the selected valve with the sample was reconciled, andthe valve model consistent with the sample was obtained. The pipeline sub-model selection process in the AMESim software was summarized. The impact law of the valve controlling cylinder system dynamic characteristics considering the pipeline characteristics in different fluid and pipe parameters was got;3. The hydraulic experimental platform was set by referencing the long hydraulic piping system. In structure, the devices of two hydraulic cylinders in opposite vertex with a large and variable thrust load was designed, and a multi-combination of hydraulic conveying fluid with long pipeline was developed. In testing system, by setting different load pressure, educing the pipeline pressure transmission transient characteristics in different length to verify the theoretical value of the amplitude-frequency characteristics of pressure ratio and the AMESim simulation model;4. By comparing the theoretical analysis and the experimental data, it was proved that pressure transmission of the long pipeline,the linear friction characteristics was being considered, could be predicted.

Related Dissertations

  1. 1200 tons automatic autoclaved fly ash brick molding equipment research and design of hydraulic systems,X705
  2. Analysis and Simulated Research of WY60 Excavator Hydraulic System,TU621
  3. Industrial valves electro-hydraulic position servo drive system and its application,TH137
  4. Compound braking efficiency regenerative braking system stability and energy efficient recovery of,U463.5
  5. Concrete pumping system hydraulic shock and stroke deviation Optimization,TU646
  6. Study on the Abrasive Flow Polishing Machine and Its Process Parameters,TG580.692
  7. The Research and Optimization about Self-propelled and Straight-arm Type Aerial Working Platform’s Working Device Hydraulic System,TU69
  8. Analysis on Hydraulic Automatic Reversing Control System of 3ZJB-B3 Hydraulic Grouting Pump,U455.3
  9. The pipe roof rig hydraulic system design and power head feed turn loop simulation study,U455.3
  10. Research into Earth Pressure Control of Epb Shield Tunnelling Machine,U455.43
  11. Study on Inversely-Proportional Relief Valve of Lateral Semi-Active Suspension System,U270.33
  12. Shield machine hydraulic long pipe vibration modal analysis and experimental study,U455.3
  13. Of hydraulic reciprocating pump and the pump turn valve and control technology,TH137.5
  14. Automobile automatic collision hydraulic servo system design , and simulation,U463.5
  15. Simulation of Emulsion Pump Based on Virtual Prototyping,TH38
  16. The Study on Evaluation Methods of Continuous Pitting Corrosion in Long Pipeline,TE973.9
  17. Study on Construction Process of Semi-autometic Welding and Low-temperature Welding of X80 Pipeline Steel,TG457.6
  18. Working Parameters Selection and Caculation of Bladder-Type Accumulator under the Different Conditions,TH137.81
  19. Load Sensitive System Dynamic Characteristics and Engegy-Saving Analysis,TH137
  20. Research on Risk Management of Long Distance Pipeline in Construction Phase,F224
  21. Modeling and Simulating Coupled with Mechanism-Liquid Model of Emulsion Pump,TH38

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical parts and gear > Hydraulic transmission > Hydraulic components
© 2012 www.DissertationTopic.Net  Mobile