Dissertation > Excellent graduate degree dissertation topics show

Bifurcation Analysis on Vibration of Shape Memory Alloy Beam

Author: GuoKai
Tutor: WuZhiQiang
School: Tianjin University
Course: General and Fundamental Mechanics
Keywords: SMA laminated beam double-loop hysteretic model frequency-response constrained bifurcation
CLC: O327
Type: Master's thesis
Year: 2010
Downloads: 35
Quote: 0
Read: Download Dissertation


In this paper, the bifurcation characteristics of single mode vibration of the SMA laminated beam are analyzed with average method and constrained bifurcation theory. The main work in this article is divided into the following five aspects:Part 3 A brief introduction of SMA, the characters of SMA and one-dimensional constitutive of SMA is given in this part. Then the research background, engineering significance and research prospects are briefly described.Part II SMA laminated beam model is established firstly. Then SMA laminated beam can be seen as a continuous one-dimensional elastic body. And through the stress analysis of micro-unit of the beam, the differential equation of motion of the beam can be got. The following, after taking the first mode of the beam, using Galerkin method, the ordinary differential equation of vibration can be got. In the case of 1 / 2 sub-harmonic resonance, using SMA double-flag style hysteretic character and average method, the amplitude-frequency response equation of the beam and the solutions of the equation can be obtained.Part III Using bifurcation theory and Maple software, the transition boundary and the regional bifurcation diagram of the whole system can be got. In the bifurcation diagram, obvious hysteretic phenomenon can be observed, and isolated solutions can also be found. The delay like this is significant for the vibration control of dynamic systems. Some special isolated solutions are also of great significance to the practical problems. By observing the hysteretic phenomenon, the conclusion that SMA can play the most important role to vibration control, when SMA is in incomplete state of phase transition.Part IV The theoretical analysis is verified by numerical simulation with Matlab software. Firstly, SMA double-flag style hysteretic model is expressed by absolute value functions; then the vibration equation got in partâ…¡is solved by numerical method; finally,the theoretical and numerical results are compared. At last, the conclusion that the theoretical results and numerical results are basically identical can be got.Part V Summary of the thesis.

Related Dissertations

  1. The Fatigue Life Study of a Car Body Based on the Random Vibration,U463.82
  2. Analysis and Calculation of Shape Memory Alloy Vibrating System,TG139.6
  3. Sensing Information Forecasting Algorithm and Controller Design for Wearable Power Assist Robot,TP242.3
  4. Research on Measurement of Structure Damping Property Based on Virtual Instrument,O329
  5. Crack Rotor Fault Diagnosis Method Based on Nonlinear Output Frequency Resopnse Function,TH165.3
  6. Research and Development of Generator Voltage Fluctuating Signal Analysis System,TN911.6
  7. Analysis of SMA Dynamical Behavior Based on Constrained Bifurcation Theory,TG139.6
  8. Low-frequency noise characteristics of the diesel cars in the car,U467.493
  9. Research on the Tehnology of Winding Frequency Response Character and Diagnosis for Power Transformer,TM406
  10. Design and Research on Stabilization Loop of Gyro Stabilized Pod Control System,V241.5
  11. Exact Fixed-Interfacial Substructure Synthesis Using Medium-Order Normal Modes,TB122
  12. Optimization on Suspension System of Business Vehicle Cab Based on Frequency Response Function,U463.33
  13. The Research on Dynamical Characteristic and Earthquake Responds of Spherical Reticulated Mega-structure,TU399
  14. Finite Element Model Updating Method Study Based on the Genetic Algorithm,TP18
  15. FE Model Updating Method of Aircraft Structure and Utility Software Study,V22
  16. The Dynamic Modeling and Analysis of the Ultra-Percision Machine Tool,TG519.3
  17. Digital Control of the power of communication,TN86
  18. Measurement of Gear Body Vibration Signals and Its Application in Fault Diagnosis,TH132.41
  19. Dynamic Properties of Rubber Isolatorsin Power-train System,U463.33
  20. Development of Diagnosis System for Transformer Winding Distortion Based on ARM,TM406
  21. Frequency-response Characteristic Simulation and Experimental Study on Electro-hydraulic Proportional Pressure Reducing Valve,TH134

CLC: > Mathematical sciences and chemical > Mechanics > Vibration theory > Structural vibration
© 2012 www.DissertationTopic.Net  Mobile