Dissertation 

About 305 item dissertation in line with TG335.1,Rolling method query results,the following is 1 to 50(Search took 0.060 seconds)

  1. Study on Surface State and Development of the Control Process of the Hot-Rolled Oxide Scale,XuRong/Northeastern University,0/14
  2. Study on Microstructure Evolution and Production Process of Low Cost C-Si-Mn-Cr Hot-rolled Dual-phase,LinJinYang/Northeastern University,0/3
  3. Study on Microstructure and Mechanical Properties of700MPa Grade Cold-rolled Weathering Dual Phase Steel,WuJing/Northeastern University,0/9
  4. Study on Process, Tecture and Fish-scale-resistance of DC05EK Cold Rolled Ultra Low Carbon Enamel Sheet,YuanXiaoYun/Northeastern University,0/7
  5. Research and Development of Low Cost500~700MPa Hot Rolled Dual Phase Steel,LiChengNing/Northeastern University,0/6
  6. Study on Temperature Field of Roll during Cold Strip Rolling,YuPeng/Liaoning University of Science and Technology,0/36
  7. Research of Rolling Technology A on SPA-H Steel Plate,ChenXiaoBo/Xi'an University of Architecture and Technology,0/16
  8. Research on Precipitation and Microstructure of X80Pipeline Steel in Hot Rolling Process,ZuoHuanJuan/Yanshan University,0/91
  9. Die Design and Simulation Research of Conical Slender Shafts by Shree-roll Cross Wedge Rolling,JiaZhanJiang/Yanshan University,0/24
  10. The Horizontal Vibration Mechanism and Experimental Research during Rhe Process of Hot Rolling,LiZuoZuo/Yanshan University,0/44
  11. Effect of Hot Rolling Reduction on Microstructure and Mechanical Properties in Hot Rolled High-strength Strip,YangJingJing/Wuhan University of Science and Technology,0/33
  12. Research on Scheduling and Matching Optimization Problems for Cold Rolling Stage in Iron and Steel Enterprises,LiHui/Northeastern University,0/16
  13. Study on Production Process and Structure Property of B250P Cold-rolled Automobile Sheet,WangChunLiu/Northeastern University,0/15
  14. Mechanical Properties and Microstructures of Cold-rolled TRIP/TWIP Steel with High Mn-content atfer Annealing,AiBeiBei/Hunan University,0/81
  15. Simulation System Development of Plate Rolling Process,LiZuo/Yanshan University,0/61
  16. Study on the Rolling Schedule Optimization of 1250mm Eight-roller Five-stand Tandem Cold Rolling Mill,WangJingSheng/Yanshan University,1/42
  17. Research on Combination Intelligent Model of Hot Rolling Strip Width Based on Improved Fuzzy Particle Swarm Optimization Neural Network,HouYanFei/Taiyuan University of Technology,0/63
  18. Study on Computational Model of Strip Temperature in Hot Coil Box,LiKang/Hebei Union University,0/1
  19. Study on the Hot Rolling Technology of65Mn Saw Steel,LiuSong/Hebei Union University,0/12
  20. Research and Application of Laminar Cooling Control System in Hot Strip Mill,PengWen/Northeastern University,0/56
  21. Study on Application of optimization model of hot rolled strip width,JinYaoCheng/Nanjing University of Technology and Engineering,0/19
  22. The Development of Cold Rolled Steel Sheet for Enameling and Study on the Fish-Scaling Resistance,LiangBingJie/Northeastern University,0/66
  23. Microstructure and Mechanical Properties of a Fe-20Mn-3Si-3Al-0.045C Steel under Cold Rolling,HuangShaoShuai/Northeastern University,0/66
  24. The Control and Elimination of Ferric Oxide Scale on the Hot Rolling Strip Steel Surface,ZhaoJiuChang/Northeastern University,0/134
  25. Inverse Decoupling Control of Cold Rolling Integrated System,DongXue/Zhengzhou University,0/13
  26. Design and Implementation of Baosteel Hot Rolling Information System,ChenWenBin/University of Electronic Science and Technology,0/11
  27. Studies on the Correlation of Cold-rolled Hardness and Strength of Austenitic Stainless Steel Sheets with the Cold Rolling Deformation,NieZhiShui/Taiyuan University of Technology,0/164
  28. Effects of Cold-rolling and Annealing Technologies on Microstructure and Property of Cold Rolled Non-Oriented Silicon Steel,YangZuo/Hebei University of Technology,0/182
  29. Computer Simulation for Csp Hot Rolling of Steel Sphd,XueMing/Wuhan University of Science and Technology,0/21
  30. Effect of Cooling Path to Microstructure and Mechanical Properties of Hot Rolled Multiphase Steel,LiAnQing/Northeastern University,0/101
  31. Spray Cooling Mechanism and Experimental Research in Large Cylinder after Hot Rolling Process,LiuJianJing/Yanshan University,0/23
  32. Study on the Control Technology of Oxide Scale of Hot Rolled Strip,ZouYing/Northeastern University,0/123
  33. Research on Lubrication Technology of SUH409L Ferrite Stainless Strip Steel in Cold Rolling,WuLiPeng/Northeastern University,0/67
  34. The Study of Forming Laws of the Hollow Shaft Cross Wedge Rolling Based on the Finite Element Theory,HuangRuGang/Shandong Institute of Architecture,0/31
  35. Study on Cross Wedge Rolling Uneven Temperature Field Composite Rolling Elongated Conical Step Shaft,ZhouYuWei/Yanshan University,0/30
  36. Development of the Finite Element Simulation System for Large H-beam Hot Rolling,WangPeiQi/Shandong University,0/38
  37. Shaft Parts Rolling Molding Numerical Simulation Study,LiPengFei/Hebei University of Engineering,0/41
  38. The Prediction of Masteel CSP Hut Rolled Strip Based on Data Mining,ZhangZhuTing/Anhui University of,0/39
  39. Vibration Characteristics Research during Service Life of Sink Roll in Cold-Rolling Strip Steel Hot-dip Galvanizing Line,LiZuoLong/Wuhan University of Science and Technology,0/45
  40. Reseach on Three-roller Cold Rolling Process of302Stainless Steel Tube,FanTao/Shenyang University of Technology,0/61
  41. Numerical Simulation and Optimization of Radial-axial Ring Rolling Process for Titanium Alloy Ti40,LiBin/Nanchang University of Aeronautics and,0/98
  42. Shape Simulation and Mill Type Evaluation Software Development of Cold Rolling Strip Based on Coupling Model Method,LiuXiQing/Yanshan University,0/43
  43. Research on Combination of Intelligent Modeling for Hot-Rolling Strip Width,YangShuangQing/Taiyuan University of Technology,0/57
  44. Research on the Thermo Mechanical Control Process of High Strength Steel Q550for Engineering Machinery,DuFeiHu/Northeastern University,0/110
  45. Experimental Study on Edge-cracking in Low-Nickel Austenitic Stainless Steel during Hot Rolling,WeiPeng/Lanzhou University of Technology,0/62
  46. Numerical-simulation Study of Radial-axial Ring Rolling Process’s Effects on Ring’s Deformation,LiuXiaoFei/Dalian University of Technology,0/60
  47. Evolution Mechanism and Inlfuence Factors of Oxide Scale of Austenitic Stainless Steel in Multipass Hot Rolling Process,SuZuoZuo/Lanzhou University of Technology,0/73
  48. Design and Off-line Simulation of Laminar Cooling for Hot Strip Rolling Software,ZuoRuiLe/Yanshan University,0/50
  49. Research on Iron Particles Characteristic and Its Effect on Friction Coefficient in Cold Rolling,YinWenKai/East China University of Science and Technology,0/66
  50. The Defect Analysis for the Surfacial Quality of the Cooling System Based on Data Mining Technology,GuoLongBo/Anhui University of,0/82

Total 7 Pages First Previous 1 2 3 4 5 6 7 Next Last

© 2012 www.DissertationTopic.Net  Mobile