Dissertation > Excellent graduate degree dissertation topics show

Design and Implementation of the Embedded System Based on ETX Module

Author: ZhangChi
Tutor: GuXin
School: Xi'an University of Electronic Science and Technology
Course: Applied Computer Technology
Keywords: ETX module Analog - to - digital conversion Serial port expansion Hardware description language
CLC: TP368.1
Type: Master's thesis
Year: 2008
Downloads: 53
Quote: 0
Read: Download Dissertation

Abstract


This paper elaborated based the ETX module embedded systems design and realization of hardware and software design . ETX 2.6 specification based on the full analysis of the combined system to achieve a variety of technical indicators , such as accuracy , reliability , speed and other aspects of the requirements , design of embedded systems based on the ETX module . The system is based on the ETX module offers a variety of commonly used PC interface , such as network interface , USB , video interface and serial etc. . In order to meet the needs of the system has also expanded 24 channel analog-to-digital conversion , multiple serial and other functional modules . This paper first introduces the whole system design and design thinking , and then introduce the specific implementation methods of the various modules . Last module driver and application design , and test the various functions of the controller .

Related Dissertations

  1. Philosophical analysis of the hardware description language,N02
  2. Research of Underwater Acoustic Communication Coding Based on FPGA,U666.7
  3. PCI Express interface design of phase change memory card,TP333
  4. Sigma-Delta A / D converter decimation filter design,TN713
  5. Designation and Realization of the Neurological Rehabilitation Acquisition System Based on USB2.0,TP274.2
  6. Design and Implementation of Swarm Robotic Controlling System,TP242
  7. Realization and Simulation of Infrared Communication Based on ARM11 Core Chip,TP368.1
  8. Electronic Current Transformer Signal Transmission and Processing,TM452
  9. The Research and Design of USB Turn Multi-serial Port Controller Based on CPLD,TP273
  10. Design and Implementation of the Software & Hardware of a Control Board for the ATM Prototype Switch Onboard,TN915.05
  11. Research on the Control Module of a Multi-network Gateway and the Bandwidth Measurement Technology,TN915.05
  12. Study Based on Microcontroller and FPGA in Single-Phase Programmable Power Source,TN73
  13. A 16-bit analog-to-digital converter design,TN792
  14. The Design of Data Acquisition System and PC Application Software for CCD Photoelectric Signal,TN386.5
  15. Design of MCS-51 Microcontroller for System on Chip,TN47
  16. FPGA-based SOPC experimental systems research and development,TN791
  17. Design of AFIS Based on Biometrics Technology,TP391.4
  18. The Research of Consuming Diesel Oil Data Acquisition and Transmission System Based on C8051F310,TP274.2
  19. Based on the design of FPGA- two-phase hybrid stepping motor drive control system,TM383.6
  20. Research and Implementation of Vehicle Mobile Terminal Based on SPCE061A and GPS,U463.6
  21. Design and Implementation of the Interface Module of a Large Capacity ATM Switch Based on FPGA,TN915.2

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Micro-computer > A variety of micro-computer > Microprocessor
© 2012 www.DissertationTopic.Net  Mobile