About 1024 item dissertation in line with Microstructure and properties query results,the following is 1 to 50(Search took 0.074 seconds)

  1. Research on Structural Strength Regeneration Mechanism and Mechanical Characteristics Evolution of Soft Dredger Fill,LiZuoZuo/Tianjin Chengjian University,0/3
  2. Effects of Preheating Temperature on Microstructure and Properties of Continuous C_f/Al Composites,ZouChunHong/Nanchang University of Aeronautics and,0/33
  3. Microstructure and Properties of Ni-Al Composite Material Blended with Tungsten Concentrate Powder Prepared by Laser Ignition Induced SHS,LuoChongHui/Liaoning Technical University,0/4
  4. Research on Powder Injection Molding of17-4PH Stainless Steel,YangZhongChen/Central South University,0/21
  5. Marine aluminum magnesium alloy sheet, wire preparation and microstructure and properties of welded joint,ZhaoYi/Central South University,0/10
  6. Research on the Activated Welding for Medium-chromium Ferritic Stainless Steel,WangYongHui/Tianjin University,0/3
  7. Electron Beam Welding Procedure of6082-T6Aluminum Alloy and Microstructure and Properties of Welded Joints,LuoChuanXiao/Nanjing University of Aeronautics and Astronautics,0/24
  8. Effect of Welding Parameters on the Quality of Aluminum/Steel Laser Powder Filling Welding,ZuoYuLin/Changchun University of Science and Technology,0/4
  9. Research on Friction Stir Welding of Al/Cu Clad Plates,WuZuo/Xi'an University of Architecture and Technology,0/10
  10. Influence of Flame Rectification Parameters on Microstructures and Mechanical Properties of SMA490BW Steel for Welded Bogie Frame,SunZuo/Dalian Jiaotong University,0/6
  11. Research on Welding Procedure of Underwater-wet Welding Technology with Trailing Medium Frequency Induction Heating,HuLeLiang/Harbin Institute of Technology,0/37
  12. Study on Process and Mechanism of TLP Bonded IC10Single Crystal and GH3039Superalloys,XueQing/Harbin Institute of Technology,0/80
  13. Research on Ti-6Al-4V Shaped Metal Deposition by TIG Welding with Wire,LiuNing/Harbin Institute of Technology,0/108
  14. Study on the Titanium/Stainless Steel Bimetallic Tube Diffusion Bonded by Inner Pressure,MiaoJia/Dalian Jiaotong University,0/26
  15. Surface Modification Process and Thermal Analysis of the Low Carbon Steel Welding Deposition,YuYeXiao/Nanchang University,0/82
  16. Application Basic Research on High-Nb X80Steel Pipes for the Second West-east Pipeline Project,ChenXiaoWei/Yanshan University,0/7
  17. Friction Stir Welding of SiCp/2009AI Composites,WangDong/University of Science and Technology of China,0/41
  18. The Preparation and Properties Research of New Titanium Alloy Brazing Materials,WuHaoBo/Central South University,0/33
  19. Brazing Process and Mechanism of ZrB2-SiC Composite Ceramic Using Pd-Co-based Filler,LiuJiaYin/Harbin Institute of Technology,0/13
  20. Study on performance of E308L electrode and metallurgical mechanism for nuclear power,ZuoHuaiWen/Jiangsu University of Science and Technology,0/5
  21. Study on Microstructure and Properties of Thin Tube of AZ31Magnesium Alloy by Extrusion Technology,JiangZuoQun/Harbin Institute of Technology,0/40
  22. Study on Microstructure of Plastic Deformation and Mechanical Properties of AZ61Magnesium Alloy Processed by Extrusion-Shearing,SuZuo/Chongqing University of Technology,0/46
  23. Effect of Preheating Temperature of H62Brass Alloy on Continuous Extrusion Process,HeHongWei/Dalian Jiaotong University,0/22
  24. Research and Development of Low Cost500~700MPa Hot Rolled Dual Phase Steel,LiChengNing/Northeastern University,0/6
  25. Experiment and Microstructure Evolution Simulation of Lead Alloy Prepared by Roll-casting with a Combination Energy Field of Electromagnetic and Ultrasonic,LiWenZuo/Central South University,0/4
  26. Interfacial Microstructure Evolution of Al/Mg/Al Laminates Fabricated by Two-pass Hot Rolling and Influences of That on Mechanical Properties,LuoChangZeng/Taiyuan University of Technology,0/113
  27. Mechanisms of Improving Strength and Ductility of Pure Zirconium and Copper by Cryogenic and Surface Severe Deformaton,YuanChao/Yanshan University,0/2
  28. Process Research on Al-7%Si/Al-22%Si Alloy Bimetal Composite by Semi-solid Thixo-forging,LiTianBao/Central South University,0/16
  29. Study on Hot Deformation Behavior and Hot Stamping Process Simulation of High Strength Steel22MnB5,XiaoBiZuo/Hunan University,0/136
  30. Solidification Condition and Alloying on Microstructure and Mechanical Properties of Mg-Zn-Sn Alloys,WeiJuYing/Hunan University,0/23
  31. Microstructure and Mechanical Properties of BT20Titanium Alloy Casted in Sand Mold and Ceramic Shell Mold,WuDongHui/Harbin Institute of Technology,0/41
  32. Influence of Sm、Bi、Zn and Die-casting Process on Microstructures and Mechanical Properties of Mg-6Al Magnesium Alloy,LiTao/Central South University,0/17
  33. Research on Microstructure and Properties of TaN-based Composite Films and Multilayer Films,XueYaPing/Jiangsu University of Science and Technology,0/2
  34. Effect of Laser Cladding on Thermal Fatigue and Wear Resistance of Hot Work Die Steel,TangShuJun/Kunming University of Science and Technology,0/74
  35. Research on the Preparation of Medium Thickness Hard Coatings,XuXinJun/Donghua University,0/40
  36. A Study on Microstructure and Mechanical Properties for Automotive Cold-rolled Low Carbon Steel under Rapid Thermal Processing,DuXiaoFeng/Northeastern University,0/4
  37. Effect of Laser Heat Treatment Technology on the Microstructures and Hardnesses of Aluminum Bronze Casting Alloys,TangJianYin/Changchun University of Science and Technology,0/1
  38. Modification and Heat Treatment on Microstructure and Mechanical Properties of High-carbon High-chromium Steel,ShiXiaoFei/Henan University of Science and Technology,0/18
  39. Hot Deformation Behavior and Heat Treatment of High-strength Ti-6Al-4.5Mo-3V-3Cr-2Sn Alloy,LiuHongZuo/Harbin Institute of Technology,0/76
  40. Study on Microstructure and Mechanical Properties of Surface Layer Produced during Plasma Re-nitriding and-Nitrocarbuieizing of M50NiL Steel,SunZhan/Harbin Institute of Technology,0/45
  41. A New Thermo-mechanical Treatment of7050Aluminium Alloy,YaoHongZuo/Harbin Institute of Technology,0/155
  42. Study on Martensite Microstructure and Properties of Medium Carbon Steel after Warm-rolled and Annealing,ChenKeXiao/Yanshan University,0/3
  43. Effect of Heat Treatment on Microstructure and Mechanical Properties of Grade E Steel,KangHongYan/Harbin University of Science and Technology,0/5
  44. The Influence on Microstructure and Mechanical Properties of Aluminum Alloy by Scrap Aluminum,YuanFangLan/Northeastern University,0/7
  45. Study of Microstructure and Mechanical Properties of New Low Alloy Wear-resistant Steel,TianChangLiang/Northeastern University,0/10
  46. Reseach on Combined Forming Process of Die Casting and Forging of Structural Component of AM60B Magnesium Alloy with Thin Wall and High Strengthening Ribs,WangDaYu/Harbin Institute of Technology,0/14
  47. Design and preparation of high modulus of rare earth magnesium alloy,HuJiLong/Central South University,0/1
  48. Microstructure and Mechanical Properties of a High Temperature Alloy for Short-term Use at700℃,ZhangHuiLiang/Harbin Institute of Technology,0/50
  49. Study on the Microstructures and Mechanical Properties of Mg-Zn-Y-Zr-xSb Alloys,ZhangXiaoHui/Harbin Institute of Technology,0/14
  50. Effect of Pour-over Technology and Feeding Cored-wire Technology on Microstructure and Mechanical Properties of Carbidic Austempered Ductile Iron with Chromium,WangJie/Harbin University of Science and Technology,0/12

Total 21 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile