About 43 item dissertation in line with Non-uniform rational B-spline query results,the following is 1 to 50(Search took 0.083 seconds)

  1. Study on Morphogenesis Technique for the Free-curved Single-layer Reticulated Shells,WangYouBao/Harbin Institute of Technology,0/25
  2. Study on EM Hybrid Methods for Analyzing Antennas around Electrically Large Target,HuangZuo/Xi'an University of Electronic Science and Technology,0/59
  3. The Mathematical Models and Their Algorithms for Inland Vessels Energy Efficiency,JiangTao/Wuhan University of Technology,0/79
  4. Study on the Free Form Surface Modeling and Five-axis NC Machining of Sculptured Surface,LongQiang/Southwest Jiaotong University,0/98
  5. Motion Analysis of Mitral Valve in Children Based on Three Dimensional Echocardiography,ZhuLei/Shanghai Jiaotong University,2/110
  6. Numerical Research on Unsteady Ship Wave-making Problems in Time-domain,ZhanChengSheng/Wuhan University of Technology,1/306
  7. Simulation of Low Voltage Apparatus Switching Arc,LiXinFu/Hebei University of Technology,26/1090
  8. Study on Representation of Ship-Hull Surface and Three Dimensional Modeling Design,ZuoDaWei/Dalian University of Technology,19/814
  9. High Frequency Electromagnetic Scattering Modeling and Its Application,WangChao/Communication University of China,4/404
  10. Study on Some Key Issues in Intelligent Control of CNC Machines,ShiXuGuang/South China University of Technology,4/802
  11. Higher-Order Moment Method Based on the Geometric Modeling of NURBS Surfaces,YuanHaoBo/Xi'an University of Electronic Science and Technology,3/182
  12. Study on the Uniform Geometrical Theory of Diffraction Method with Targets Constructed by Arbitrary Surfaces,WangZuo/Xi'an University of Electronic Science and Technology,1/121
  13. Study on Morphology of Freeform Surface Structures,LiXin/Harbin Institute of Technology,0/141
  14. The Development of Bulk Carrier Intact Stability Computation System WHUT-ISCS,YouZuoCheng/Wuhan University of Technology,2/125
  15. Research on Machining Tool-path Interactive Modification and Optimization of Sheet Metal Incremental Forming,FangJingChun/Huazhong University of Science and Technology,1/212
  16. Study on NURBS Surface Modeling and NC Machining Technique of Scattered Data,CaiQingHua/Shenyang University of Technology,8/348
  17. Calculation of Wavemaking Resistance of SAWTH Ships Using a NURBS-Based Higher Order Panel Method,ChenHongMei/Wuhan University of Technology,7/192
  18. Research on Surface Reconstruction Based on Nou-Uniform Rational B-Spline,ZhaoZuoZhi/Tsinghua University,6/688
  19. CAD system software research and development based on NURBS blade design,WanDong/Northwestern Polytechnical University,4/252
  20. Research and Develop of CAD/CAM Integrated System for Numerical Control Linear Cutting,LuoLingHui/Guangxi University,7/182
  21. Surface digitization and research based on NURBS Surface Reconstruction,ChenJianXiong/China Institute of Metrology,2/286
  22. A Study of Optimal Hull Form for Minimum Resistance,HuangJinSen/Tianjin University,3/243
  23. RCS calculated based on the complex model of NURBS surfaces,LiuWei/Northwestern Polytechnical University,1/206
  24. Research -based modeling and rendering technology point,FanYanGe/Capital Normal University,2/135
  25. Research of Hull Lines Modeling System,LiuKeFeng/Harbin Engineering University,7/276
  26. GIS-based data visualization grid operation methods and research,HuZhiWu/Zhejiang University,6/266
  27. Fuzzy Reliability Analysis of Multi-State System,ZhaoDeGao/Dalian University of Technology,7/499
  28. Based on NURBS blades optimized design and OpenGL rendering simulation system development,JinJun/Northwestern Polytechnical University,2/354
  29. Study and Realization for Stability of the Floating Structure Based on AutoCAD Software,DongYongJie/Dalian University of Technology,0/169
  30. Airborne radome analysis and design,ZhangZuo/Northwestern Polytechnical University,6/385
  31. Study of Physical Optics Based on NURBS Surface Model and Stationary Phase Method,ZhaoZuo/Xi'an University of Electronic Science and Technology,0/145
  32. Study on the Preprocessing of Rapid Computation of Aerodynamic Heating for Hypersonic Aircrafts,GaoYang/Nanjing University of Aeronautics and Astronautics,1/178
  33. NURBS-based twin-screw compressor rotor type line study,MaXianLong/Jiangnan University,5/202
  34. Study on the Application of the Physical Optics to the RCS Computation Based on NURBS Modeling Technology,WuWen/Xi'an University of Electronic Science and Technology,3/204
  35. Calculation on Radar Cross Section of Electrically Large Targets Modeled with NURBS,YangZuo/Xi'an University of Electronic Science and Technology,0/146
  36. Modeling and Simulation of Reflector Antennas Based on NURBS,ZhaoXuDong/Xi'an University of Electronic Science and Technology,1/87
  37. Based on three-dimensional ultrasound in pediatric cardiac motion analysis of common atrioventricular valve,XuChen/Shanghai Jiaotong University,0/32
  38. Based on neural network classification of multiresolution NURBS surface topography reconstruction,LiuXue/Shandong Normal University,2/43
  39. Curve and Surface Interpolation Algorithm of freedom and Simulation,LiKaiCan/University of Electronic Science and Technology,2/120
  40. A Study on Watermark-based Copyright Protection for CAD Models,GaoLu/Zhejiang University,1/80
  41. The Study of Aerodynamics Numerical Optimization Design of Axial Turbomachinery Blades,WangLu/Graduate School,Chinese Academy of Sciences,3/189
  42. Geometry Creating and Topology Morphogenesis for the Space Structures of Free Surface,GaoJiaWei/Harbin Institute of Technology,0/54
  43. The Design and Simulation System for Turbine Blade of the Aero-Engine,LiuChuanWei/Northeastern University,0/173

Total 1 Pages First Previous 1 Next Last

© 2012 www.DissertationTopic.Net  Mobile