Dissertation 

About 108 item dissertation in line with Surface Topography query results,the following is 1 to 50(Search took 0.080 seconds)

  1. Support and Drive System for Stylus Scanning Surface Topography Measuring Instrument with Large Range,LiuLiWei/Huazhong University of Science and Technology,0/4
  2. Effect of Osteoblast Adhesion on Ti6Al7Nb Materials with Different Morphologies,ZhouWenQing/Harbin Institute of Technology,0/33
  3. The Study on the Non-uniform Ground Motion Input and Seismic Mechanism of Shapai Arch Dam,LinSen/Tsinghua University,0/9
  4. Development of Two-dimensional Coplanar Stage with Large Travel,WuJun/Huazhong University of Science and Technology,0/12
  5. A Study on Stitching Techniques of Grinding Wheel's Topography Based on Vertical Scanning White-light Interferometry,WangShuang/Huaqiao University,0/1
  6. The Experimental Study on Metal-bonded Fine-grained Diamond Wheels Dressed by Electrical Discharge Machining,LiWen/Hunan University,0/34
  7. The Experimental Research on Dressing and Grinding Performance of Resin Bonded Fine-grained Diamond Wheel,SongQingBin/Hunan University,0/19
  8. Study on Dynamics Modeling and Simulation of Helical Milling Operation,ZhengMin/Hunan University,0/36
  9. Ball-end Milling Surface Topography Simulation and Roughness Prediction,ZhengYi/Harbin University of Science and Technology,0/10
  10. Surface Topography Characteristic of1Cr18Ni9Ti and45#Steel after Electrochemical Finishing,ChenDan/Dalian University of Technology,0/3
  11. Composite Characterization of Engineering Ceramics Ground Surface Topogarphy,LiangXiaoHu/Tianjin University,0/3
  12. White-light Vertical Scanning Interferometer Control System Design and Optimization,WuZhiShun/Huaqiao University,0/39
  13. Stylus Sensor System Based on Phase Grating Interference Principle,HeiYangHui/Huazhong University of Science and Technology,0/24
  14. The Preparation and Optical Properties of ZnO and ZnO:Al,ZhengJinJin/Huazhong University of Science and Technology,0/22
  15. Research on Multi-heads CO2Laser Texturing Technology Based on Beam Modulation by Polygon Scanning,ZhouLe/Huazhong University of Science and Technology,0/1
  16. Analysis of Piston Secondary Motion and Research on Squeezing Effect of Surface Topography,WangQingSheng/Hefei University of Technology,0/124
  17. Theory and Method of Hybrid Dimensional Part Surface Modeling and Its Application in Prediction of Product Assembly Quality,ZuoZuo/Zhejiang University,0/47
  18. Research on the Leakage of the Mechanical Rotating Seal and Test under the Condition of Deep Well,ChenRongYan/Harbin Institute of Technology,0/0
  19. Influence of Surface Topography on Friction and Wear Characteristics of Connecting Rod Bushing,ZhaoJingWei/University of North,0/81
  20. Study on Friction and Wear Topography of Bionic Coating Surfaces Based on Fractal Theory,ZhaoXiJiang/Dalian University of Technology,1/166
  21. The Influence of Surface Topography and Mechanical Properties of the Material on Mixed Lubrication,ZhangKuo/Jilin University,0/270
  22. Research on Evaluation Method of Surface Topography Based on New GPS,ChengXiong/Guilin University of Electronic Science and Technology,0/53
  23. A System Based on White-light Interference Microscopy for3-D Surface Topography Measurement,LiJuan/Huazhong University of Science and Technology,0/45
  24. Surface Topography Simulation and Surface Texture Control in Ultra-precision Milling,FangZhengLong/Huazhong University of Science and Technology,0/58
  25. Modeling and Prediction of Surface Topography in Hard Milling of H13Steel,ZhaoHouWei/Shandong University,0/35
  26. Experimental Study on Surface Quality and Micro Burr Formation in Micro-milling,JinSai/Shandong University,0/62
  27. Research on Prediction Algorithm and Simulation for Surface Morphology of Optical Free Surface,WangXiaoLong/Jilin University,0/61
  28. Study on the Influence of Rolling Process on the Microstructure and Properties and Surface Topography of High Voltage Anode Aluminum Foil,HeXiaoLong/Central South University,0/95
  29. Simulation Analysis and Experimental Research on Fabricating Hydroxyapatite Coating by Cold Spraying,WuZhiYong/Jilin University,0/33
  30. Development of New Coatings and Technologies Against Marine Biofouling,JieLaiYong/University of Science and Technology of China,0/262
  31. Numerical Simulation of Elastic Waves with the Undulating Topography,YangPengKai/Central South University,0/174
  32. The Theoretical Research on the Influence of Surface Topography on Specific Adhesion,YaoJinYan/Lanzhou University,0/11
  33. Measurement and Evaluation for Surface Topography of Laser Roughen Steel Rolls,XiaLingLin/Huazhong University of Science and Technology,0/198
  34. Inner Hole Range Sensor with Laser Triangulation,XiongZhiYong/Huazhong University of Science and Technology,1/56
  35. Effect of Surface Characteristics of Material on Initial Droplet Formation and Heat Transfer of Dropwise Condensation,MuChunFeng/Dalian University of Technology,0/309
  36. Study on Force and Surface Topography Modeling and Process Optimization of Meso-Scale End-Milling,LiChengFeng/Shanghai Jiaotong University,2/600
  37. Study of Surface Characteristics Both of Wear Particles & Wear Components and Their Relationship in Wear Process,YuanChengQing/Wuhan University of Technology,18/1452
  38. Measuring System of Surface Topography Based on Displacement Sensor with Micro Constant Measuring Force and 2-D Motif Assessment Method,YangLianGen/Huazhong University of Science and Technology,7/321
  39. Theoretical and Experimental Studies on Contact Damage of Elastic Force Joint Sleeve of Oil Film Bearing in Rolling Mill,LiHuiJian/Yanshan University,2/267
  40. Research on Fractal Character of Machined Surface Topography Based on Surface Grayscale Image,QuanShuHai/Wuhan University of Technology,12/872
  41. Non-Time-step-parameter Time Finite Element Methods and Grid Methods for Numerical modeling of Elastic Wave Propagation in Dynamics,LiuTieLin/Dalian University of Technology,3/337
  42. Research on Grinding Mechanism of Hardened Cold-work Die Steel Based on Single Grain Cutting,YanLan/Hunan University,4/394
  43. Research on Geometric Error Analysis and Prediction in Workpiece-Fixture-Cutter System,WanXiaoJin/Huazhong University of Science and Technology,6/599
  44. The surface morphology of white light interferometry -based contact and non-contact measurement system of dual-use,YunJianPing/Huazhong University of Science and Technology,11/387
  45. Theoretical Modeling and Parameters Inversion for Microwave Remote Sensing of Lunar Surface,FaWenZhe/Fudan University,5/710
  46. Wavelet and Fractal Analysis about Surface Topography of KDP Crystal and Its Effect on Transparent Performance,PangQiLong/Harbin Institute of Technology,0/261
  47. Research on the Key Technologies of the Spherical Grating Interferometer for Surface Measurement,PuWeiYing/Harbin Institute of Technology,2/107
  48. Theory and Application of Leakage Predication for Mechanical Seals,SunJianJun/Nanjing University of Technology,0/0
  49. Fabrication of Binary Structured Surface for Drag Reduction,DouZhaoLiang/Tsinghua University,1/42
  50. Research on Slicing Mechanism and Technology with Fixed Diamond Wire Saw for Semiconductor Ceramics,ZhaoLiGang/Nanjing University of Aeronautics and Astronautics,3/224

Total 3 Pages First Previous 1 2 3 Next Last

© 2012 www.DissertationTopic.Net  Mobile