Dissertation 

About 35 item dissertation in line with interpolator query results,the following is 1 to 50(Search took 0.030 seconds)

  1. Study of Velocity Planning and Contour Error Estimation Method Based on PH Curve,GuoYangQing/Harbin Institute of Technology,0/5
  2. Research and Development of Five-Axis Interpolator Based on Cutting Tool Path,ChenZhiCheng/Harbin Engineering University,0/41
  3. Numerical Simulation and Experimental Research on Multi-Point Sandwich Forming of Steel Sheet,ZhangZuo/Harbin Institute of Technology,5/277
  4. Construction of True Bidimensional Wavelets on Lifting Scheme and Application in Image Coding,GuoYingChun/Tianjin University,3/310
  5. Research on Interpolation Algorithm and Acceleration-Deceleration Controller in CNC System,ZhaoWei/Tianjin University,39/2834
  6. Adaptive Algorithms of Suppression Narrow-Band Interference in DSSS,SunZhiGuo/Harbin Engineering University,7/592
  7. Research on Real-time Algorithms of NURBS Tool-paths Interpolation,SunHaiYang/National University of Defense Science and Technology,6/430
  8. Suitable MPEG2/H.264/AVS motion compensated interpolator brightness Hardware Design and Implementation,ZhaoZiLiang/Shanghai Jiaotong University,1/296
  9. Analysis and Achievement of Time Interval Measurement Instrument,TangHai/Xi'an University of Electronic Science and Technology,3/247
  10. The Research and Realization on Timing Recovery Technique of QAM Demodulator,LiZuo/Xi'an University of Electronic Science and Technology,6/364
  11. CNC interpolation precision detection device hardware development and research,LiTaiFu/Sichuan University,0/251
  12. Research and Development on Device Driver of Measurement & Control System Based on Windows,LangBaoHua/Xi'an University of Technology,2/271
  13. The Research on Applied Technology of Spectrum Analysis and Its System Design Based on ARM,ZhuWeiWei/Beijing Jiaotong University,1/324
  14. The Design of Digital Oscillograph Based on Nios,TianHui/Jilin University,2/714
  15. Genetic Algorithms for Outlier Identification in Time Series,ChenZuo/Southeast University,1/203
  16. Research on Symbol Synchronization in WiMAX,JiangKe/Southeast University,5/393
  17. Digital communications symbol timing and Viterbi decoding algorithm and Implementation,JiangHui/Nanjing University of Technology and Engineering,0/445
  18. The Experimental Research of the Saddle Workpiece by Multi-Point Sandwich Forming,SongPeng/Harbin Institute of Technology,2/86
  19. Study on Embedded Control System of Polishing Free-form Surface Machine Tool,DiFangChao/Jilin University,5/162
  20. The Research on the Method of Sample Timing Adjustment on Software Radio Receiver,LiuYu/Dalian Maritime University,1/225
  21. Research and Design of Efficient FIR Filter in Software Radio System,WuGuoQing/Dalian University of Technology,4/545
  22. Design and Research of Interpolator of Economical Type Numerical Control Lathe,WeiWei/Liaoning Technical University,0/271
  23. Design and DSP Implementation of Digital Receiver Demodulator,HeFeng/Xi'an University of Electronic Science and Technology,1/173
  24. Ray-casting algorithm hardware architecture RCAA Key Issues,WeiJiZeng/Tianjin University,0/28
  25. The Research and Implementation on Timing Recovery of Digital Television Terrestrial Brocasting System,WangBaiYu/Shanghai Jiaotong University,0/81
  26. Research and Design of the Clock and Data Recovery Circuit in LVDS Receiver,WangShuangYang/Huazhong University of Science and Technology,1/247
  27. Software Design and Development on DSP-Based Multi-axes Motion Controller,XuXiong/Shanghai Jiaotong University,14/483
  28. Research on the Digital Front-end of Demodulator Compatible with DVB-T and DTMB Protocols,LaiLinZuo/East China Normal University,0/121
  29. Research and Implementation on Symbol Timing Recovery Algorithm of DTTB System,SongYueWei/Xi'an University of Electronic Science and Technology,0/103
  30. Research and Implement on Control Algorithm in Embedded CNC System Based on SOPC,ZhengYunHua/Central South University,3/64
  31. Ultra- high-speed ADC folding and interpolating architecture and circuit design,LiuYuan/University of Electronic Science and Technology,0/224
  32. Small Lines Continuous Interpolation Research for CNC Machine Tools,ZhaoShuang/Harbin Institute of Technology,2/168
  33. Research of Trajectory Plan Based on Look-Ahead in High Speed CNC,LiJianHua/Harbin Institute of Technology,1/63
  34. Design of Phase Interpolator in 3.125Gbps CDR of High-Speed Serial RapidIO,ZouLi/National University of Defense Science and Technology,0/47
  35. Design of a Practical Real-Time Mixed-Path Interpolator for 3-Axis CNC Machining,QiuManMan/Harbin Institute of Technology,0/47

Total 1 Pages First Previous 1 Next Last

© 2012 www.DissertationTopic.Net  Mobile