Dissertation 

About 35818 item dissertation in line with TG,Metallurgy and Metal Craft query results,the following is 1 to 50(Search took 0.029 seconds)

  1. Research of Three-dimensional Assembly Process Modeling Method Based on MBD,TangJiaLin/Northeastern University,0/14
  2. Numerical Simulation and Experiment of Electromagnetic Riveting and Joint Mechanical Property,ChenJingZuo/Harbin Institute of Technology,0/20
  3. Digital Assembly Process Planning Based on Tecnomatix and Post-processing,WangPeng/Harbin Institute of Technology,0/37
  4. Assembly MBD Datasets and Assembly Process Simulation,LuMingShang/Huazhong University of Science and Technology,0/16
  5. Research on Virtual Assembly Technology of Heterogeneous CAD Model,LiuWei/Huazhong University of Science and Technology,0/9
  6. Research on the Virtual Assembly System of High Precision Servo Turntable,FanGenXin/Changchun University of Science and Technology,0/3
  7. Research on Key Technique of Material Distribution in Assembly Process of Mechanical Products Based on MES,MaPengHui/Hefei University of Technology,0/33
  8. Research on Personnel Scheduling Problem of Assembly Process of Mechanical Products,HuangLi/Hefei University of Technology,0/26
  9. Research on Visualization Monitoring and Control System of Mechanical Product Assembly Based on MES,WangLin/Hefei University of Technology,0/26
  10. Research on Key Technologies of an Automated Microassembly System,WuChaoMing/Chongqing University,0/181
  11. Research on Online Control Method for Assembly Process Quality of Complex Mechanical Products,ZhaoZhiBiao/Hefei University of Technology,0/187
  12. Research on Assembly Sequence Planning Based on Discrete Firefly Algorithm,ZengBing/Xiangtan University,0/91
  13. Research and Application of Virtools-based Virtual Assembly System Key Techniques,LvFengXian/Hunan University,0/55
  14. Real Time Collision Detection Research in Virtual Assembly System,JiKaiQiang/Dalian Jiaotong University,0/13
  15. Study AndDesignof Top-Down Virtual Assemblysystem,LiWenLiang/Dalian Jiaotong University,0/11
  16. The Virtual Assembly System Interface Design Based on Visual C++,LeiMing/Dalian Jiaotong University,0/19
  17. Interface Slip Characteristics and Fatigue Reliability Analysis of Self-piercing Riveted Joints,DengChengJiang/Kunming University of Science and Technology,0/8
  18. Evaluation of Assembly time based on Artificial Neural Network and Virtual Assembly,JieBiao/Xi'an University of Technology,0/21
  19. Research on Virtual Assembly Hybrid Model Construction Technology and Its Application Based on Local Reverse,QinXinWei/Zhejiang University,0/23
  20. Assembly Simulation and Its Ergonomics Analysis Based on Kinect,WangChaoZeng/Zhejiang University of Technology,0/4
  21. Research on the Measurement System of Gear Chamfering Profile with a Laser Sensor,ZhangXinHua/Tianjin University of Science and Technology,0/14
  22. Research on Major Error Measuring Method for Large Spur Gear,ZhaoYing/Tianjin University of Science and Technology,0/12
  23. Contact Stress Analysis of Gears with the Assembly Error and the Design of Tolerance Inquire System,LiuLiQiang/Northeastern University,0/11
  24. The Modeling Studyon Error Compensation Technique of the Gear Measurement Equipment,LiBin/Tianjin University,0/1
  25. Study on Error Compensation Model to Improve the Measurement Accuracy of Involute Gear,CaoHongYan/Tianjin University,0/3
  26. Research on Automatic Measurement for the Radial and Face Run-out of Half-axle Gears,ZhangTao/Huazhong University of Science and Technology,0/12
  27. Research on Measurement Method of Big Gear Based on Gear Measuring Center,HanLiMei/Harbin University of Science and Technology,0/23
  28. Research of Direct Drive Control System of Gear Measuring Center Based on Turbo PMAC2Controller,ChenLei/Harbin University of Science and Technology,0/10
  29. Finite Element Analysis and Optimization of Gear Parameter Laser Measurement System,ZhuangZuo/Changchun University of Science and Technology,0/1
  30. The Analysis of Error and Study on Improvement Measures in the Detection of Displacement by Laser Triangulation,YuPeiZhang/Changchun University of Science and Technology,0/2
  31. Research on Gear Error Parameter Extraction and Model Reconstruction Algorithm,ChenHongYin/Changchun University of Science and Technology,0/1
  32. Investigation of Measurement Method and Software of Face Gear Using CMM,ZhangYan/Central South University,0/50
  33. Development of Rapid Inspection and Evaluation System for Spur Gear's Common Normal Line,WangYi/Northwest University of Science and Technology,0/21
  34. The Research of Error Compensation Technology about Gear Measuring Center,SongYuan/Nanchang University,0/59
  35. Study on the Precise Measurement System of Small Module Gear,LiuShuai/China Jiliang University,0/48
  36. Research on External Thread Parameters Measreument Based on the Universal Tool Microscope and Charge-coupled Device,WangWenZuo/Harbin Institute of Technology,0/73
  37. Development of LPC936 portable measuring instrument of surface roughness based on,XuTao/University of Electronic Science and Technology,0/4
  38. Research and Development of Stylus Surface Roughness Measurement System,GuanQingYan/China Jiliang University,0/90
  39. Portable Surface Roughness Measuring Instrument for Measuring Software Development,YeFan/Harbin University of Science and Technology,0/1
  40. The Simulation of Rough Surfaces Based on the FFT and The Linear Transformation Methods,LiaoDongRi/Central South University,0/24
  41. Development of Portable Roughness Tester Based on DSP System,DengHuiYuan/Harbin University of Science and Technology,0/4
  42. Development of Portable Roughness Measuring Instrument Based on Piezoelectric Sensor,FengZhiChao/Harbin University of Science and Technology,0/7
  43. Design of Surface Roughness Measuring System of Parts Based on ARM,ZhangKeQiang/Harbin University of Science and Technology,0/10
  44. Surface Roughness Measuring Based on the Theory of Fractal Geometry,WuDingGui/Xiamen University,0/4
  45. Design of Contact Measuring Instrument for Taper and Key Technology Research,LvXiangFeng/Harbin Institute of Technology,0/26
  46. Research on Digital Inspection and Assessment Algorithm of Three-dimensional Circularity Errors,DongQingLin/Hunan University,0/25
  47. Geometry Searching Algorithm for Flatness Error Evaluation,LiFei/Henan University of Science and Technology,0/10
  48. Researchment on Pneumatic Measurement of Valve Sleeve Bore's Cylindricity Based on Error Compensation,ZengQiWen/Harbin Institute of Technology,0/28
  49. Study of linear measurement system of small bore tubes,ZhouWei/Nanjing University of Technology and Engineering,0/10
  50. Development of a Versatile Non-contact Roundness Detecting Instrument,MengFanLiang/Hefei University of Technology,0/6

Total 717 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile