Dissertation 

About 4749 item dissertation in line with TH13,Mechanical parts and gear query results,the following is 1 to 50(Search took 0.018 seconds)

  1. Electro-hydraulic Position System with High Speed Solenoid Valve and Its Characteristic Research,ShaoWenLin/Liaoning Technical University,0/4
  2. Calculation of the Permanent Magnet and Study of the Speed Control System for the Squirrel Cage Type Magnetic Coupling,WenZiZuo/Dalian Jiaotong University,0/14
  3. Study on Modeling and Simulation of Pneumatic Cylinder under Low Speed Stick-slip,LiuXinYan/Harbin University of Science and Technology,0/3
  4. The Friction Compensation Analysis and Diagnosis of Pneumatic Control Valve,ChenXingWu/Northeastern University,0/2
  5. Research on the Control Strategies of Pneumatic Loader Simulator Based on Dynamic Pressure Feedback,FengShiZe/Harbin Institute of Technology,0/11
  6. Research on Electro Pneumatic Proportional Valve Driven by Plate-attached Type Bending Vibration Mode Ultrasonic Motor,GuoXiangDong/Harbin Institute of Technology,0/78
  7. The High Pressure and Uhp Control Technology Research in A Small Cavity,LiGang/Changchun University of Science and Technology,0/2
  8. Pneumatic and Realization of the intelligent valve positioner,ZhouHuanXi/Nanjing University of Technology and Engineering,0/19
  9. Study on Dynamic Performance Analysis and Optimization of Gas-liquid Pressurization System,GuoZuo/Beijing Institute of Printing,0/24
  10. Design and Research of3/2High-Speed Pneumatic On/Off Valve,DingLi/Zhejiang University,0/23
  11. Study On the Power Assist Exoskeleton System For Upper Limb Driven by Pneumatic Artificial Muscles,ZhangDanZuo/Zhejiang University,0/52
  12. Research on Parameter Measurement System of Cylinder Head Gasket,WangXingRi/Changchun University of Science and Technology,0/3
  13. Pneumatic Valve Pressure Regulation of the Opening-hole Precision Control Research,LiTian/Changchun University of Science and Technology,0/1
  14. Design and Research for Hydraulic Cylinder Improvement Based Energy-Saving,ZhangQingQing/Tianjin University of Science and Technology,0/13
  15. Research on Hydraulic Brake Based on Positioning Car of Shenhua Huanghua Port,ShiBaiJu/Yanshan University,0/17
  16. The Improved Design and Simulation of the Electro-hydraulic Step Cylinder with Built-in Servo Valve,CaoJunKai/Northeastern University,0/2
  17. Design of Human-computer Interaction and Database for the Performance Testing System of Hydraulic Components,JiaZengPan/Northeastern University,0/4
  18. Design of Hydraulic System in Pushing Thin-walled Tube Forming,LiuDi/Northeastern University,0/3
  19. High Strength Steel Hydraulic Press Electro-hydraulic Proportional Servo System Research and Design,LingShuang/Northeastern University,0/2
  20. Optimized Design and Study on Electro-Hydraulic Servo Valve Characteristics Test-bed Based on LabVIEW,LiDong/Northeastern University,0/7
  21. Design of Hardware and Software of the Performance Test System for Hydraulic Components,HuWei/Northeastern University,0/8
  22. The Design and Research on Servo Hydraulic Cylinder Test-bed,ChenYiFa/Northeastern University,0/3
  23. The Experimental Study on Performance of Hydraulic Pump/Motor Based on the Power Recovery Methods,HaoYuYan/Northeastern University,0/3
  24. Precision Analysis and Experimental Research on the Press-fit of Armature Components,LiBin/Harbin Institute of Technology,0/27
  25. Study on Applicability of Modal Space Decoupled Controller for a Hydraulically Driven Stewart Platform,QiZuo/Harbin Institute of Technology,0/73
  26. YJSW340Dual-Turbine Torque Converter Turbine Torque Distribution Regularity and Optimization Research,ZuoWanBin/Zhejiang University,0/11
  27. The Design of Variable Displacement Pump and Its Dynamic Characteristics Analysis,BaiChangAn/,0/3
  28. Theoretical Study of the Structural Parameters and Performance of Hydraulic Impactor Relationship,ChengDai/,0/6
  29. Numerical Simulation and Analysis of the Dynamic Characteristics of the Internal Flow Field of Hydraulic Impactor,ZhuFaLong/,0/0
  30. Development on High Speed Servo Controller for Multi-cylinder Hydraulic Press,ZhangKai/Tianjin University,0/2
  31. The Design and Implementation of the Testing System of the Large Flow Waterway Valve,ChenFei/Huazhong University of Science and Technology,0/6
  32. Research on the Characteristics of the Seawater Hydraulic Digital Switch Valve,MengJunXian/Huazhong University of Science and Technology,0/6
  33. Research on a Water-lubricated Hydraulic Pump with Port Valves,TangHui/Huazhong University of Science and Technology,0/14
  34. Dynamics Analysis Research on Piston Motor Pump with Double Swash Plate,WuXiaoYu/Huazhong University of Science and Technology,0/7
  35. The Research of Ski Boot Type Plunger Healing Molding Characteristics Based on Spinning Technique,MaoYiLong/,0/0
  36. Hydraulic System Design and Experimental Research of Submarine Plough,WangZhiPeng/Harbin Engineering University,0/34
  37. Reacher of Load Simulation Technology Based on Elector-Hydraulic Loading,WangMinXue/Changchun University of Science and Technology,0/0
  38. Research of the Hydraulic Simulation System for Servo Load,YangJianXin/Changchun University of Science and Technology,0/3
  39. Design Development and Research of a New Radial Piston Pump,LiuChengKun/Qingdao University of Science and Technology,0/15
  40. Research on Remanufacturing Hydraulic Pump Performance Test System,ZhuRui/Hefei University of Technology,0/20
  41. Analysis on the Dynamic Characteristics of Hydraulic System Based on the Product Instances,ZuoZuoMing/Hefei University of Technology,0/25
  42. Numerical Simulation of High Speed Hydraulic Cylinder Dynamic Process Flow Field Based on Dynamic Mesh Technology,ShenYang/Wuhan University of Science and Technology,0/74
  43. Structure Design and Characteristics Study on a New Rolling&Propulsive Hydraulic Cylinder,BiLei/Wuhan Institute of Technology,0/3
  44. The Feasibility Analysis of Hydraulic Cylinder Remanufacturing,GaoTing/Wuhan University of Science and Technology,0/54
  45. Research on Large Servo Hydraulic Cyli Mnder Testethod,LiTao/Wuhan University of Science and Technology,0/25
  46. Research on the Flow Characteristics and the Steady-state Flow Force of the U-shaped Notch Throttle Orifice in Spool Valve,LiXiong/Wuhan University of Science and Technology,0/65
  47. Study on the Flow Characteristics of the V-shaped Non-circular Opening Spool Valve,SunZhongWei/Wuhan University of Science and Technology,0/34
  48. Research and Control the Leakage of Hydraulic Component Clearance,ChenJing/Wuhan University of Science and Technology,0/61
  49. Research on the Monitoring Method of Hydraulic Equipment Running Status Base on the Electric Parameter Analysis,WangXiaoZhen/Xi'an University of Architecture and Technology,0/1
  50. Refractory Material Wet Spraying Machine Hydraulic System and the Device to Optimize the Design of Gunning,ZhangGang/Xi'an University of Architecture and Technology,0/7

Total 95 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile