About 1043 item dissertation in line with TH3,Pump query results,the following is 1 to 50(Search took 0.083 seconds)

  1. Comparative Analysis and Research for Efficiency Technical Indicators of Stamping and Welding Centrifugal Pump and Casting Pump,ZhaoJinJing/Zhejiang University of Technology,0/3
  2. Matching Design and Research of Impeller Outlet and Diffuser Inlet in Stamping and Welding Centrifugal Pump,LuHeQuan/Zhejiang University of Technology,0/14
  3. Reserch and Discussion of Matching Relation between Guide Vane Outlet and Impeller Inlet of Stamping and Welding Centrifugal Pump,WangHui/Zhejiang University of Technology,0/12
  4. Vibration Source Analysis and Vibration Control of Vertical Multistage Centrifugal Pump Set,ChenChunLai/Harbin Engineering University,0/11
  5. Development of Hrio Type High-Speed Rotor Dynamic Tester,ZhouZhongPeng/Zhejiang University,0/48
  6. Research of Crankshaft Bearing Performance in Diaphragm Pump,MaJian/Northeastern University,0/3
  7. The Development of Design System for High Pressure Low Noise Helical Rotor Pump and Complicated Tool,JiangZuWu/Harbin Institute of Technology,0/11
  8. Parametric Design and Simulation Research of Axial Piston Pump,WangLei/Liaoning Technical University,0/9
  9. The Characteristics Simulation of the CY Axial Piston Pump,WangYuZuo/Liaoning Technical University,0/8
  10. Theoretical and Experimental Research on5Horsepower Air-Source High Temperature Heat Pump,ZhangXiaoYan/Huazhong University of Science and Technology,0/6
  11. Theoretical and Experimental Study on a5kW Quasi-two Stage Compression Heat Pumping System,TanXi/Huazhong University of Science and Technology,0/4
  12. The Numerical Simulation of the Flow Noise in the Centrifugal Pump and Noise Optimization,ZhaoWei/Huazhong University of Science and Technology,0/19
  13. Hydraulic Design and Characteristic Analysis of Bidirectional Axial Flow Pump Model,DanDan/Huazhong University of Science and Technology,0/7
  14. Analysis of Disassemblying Oil Pump,CongLiang/Harbin Engineering University,0/9
  15. The Research of High Frequency Linear Electromagnetic Drive in Fluid Power,WenJiangTao/Huazhong University of Science and Technology,0/4
  16. Parametric Design of Axial Flow Pump and Numerical Simulation,WanZuo/Huazhong University of Science and Technology,0/10
  17. Dynamics Modeling and Modal Analysis for the Rotor in Water Medium,ZhangZuo/Huazhong University of Science and Technology,0/8
  18. Numerical Simulation of Cavitating Flow in Axial-flow Pump,XuWei/Huazhong University of Science and Technology,0/8
  19. Research on the Effect of Sand Volume Fraction on the Flow Field in the Centrifugal Pump,WangXueRui/Hefei University of Technology,0/15
  20. The Deformation Analysis and Structural Optimization of the BY004-1Type Axial Plunger Pump Cylinder,QiuZuo/Hefei University of Technology,0/21
  21. The CFD Simulation Analysis of Flow Distribution Features and Optimal Design in Axial Piston Pump,LiShouJun/Hefei University of Technology,0/43
  22. Development of high accuracy constant speed constant pressure metering pump,CaiXiaoLei/Yangzhou University,0/15
  23. Optimization Design of Centrifugal Pump Based on Genetic Algorithm and its Performance Analysis,ZhuBaiLin/Xiangtan University,0/59
  24. Dynamic Analysis of Flow Field Inside Centrifugal Semi-lean Pumps,LiYue/Jinan University,0/2
  25. The Analysis of BW-150Slurry Pump Displacement Unevenness and Key Parts Life,QinHuaSheng/Central South University,0/20
  26. Double Suction Centrifugal Pump Impeller's Modeling Method and the Analysis of Flow Field,SongJin/Xiangtan University,0/74
  27. Design and Research on Quantitative Radial Piston Pump,JiangJie/Hunan University,0/45
  28. Study on Single-stage Centrifugal Pump Vibration,FanFuJing/Xi'an University of Petroleum,0/2
  29. The Research of Testing Efficiency of Oil Pump,RenYuBin/Xi'an University of Petroleum,0/2
  30. Plunger Pump Ductile Cast Iron Friction Piece Defect Analysis and Improvement of Production Process,LiuShaoZhong/Hunan University,0/16
  31. Study Solving the Trapped Oil Phenomenon in Gear Pump,WangJian/Hebei University of Engineering,0/40
  32. Analyses on Water Resistance for A Still Mixed-flow Pump Vaned Diffuser,MaShengZuo/Lanzhou University of Technology,0/5
  33. Basic Theoretical Research on the Inner Curve Planetary Gear Pump,DingHong/Anhui University of Technology,0/8
  34. The Optimization and Numerical Simulation of Vortex Pump,HuangLong/Anhui University of Technology,0/11
  35. The Movement Characteristics Research of Plunger on Axial Piston Pump with Pressure Balanced and Uniform Flow,KongLinLin/Anhui University of Technology,0/12
  36. The Design of Photovoltaic Water Pump System Based on Photovoltaic Power Supply,XueXi/Anhui University of Technology,0/12
  37. Research on Valveless Piezoelectric Pump with Asymmetric Nozzle/Diffuser Elements,FengLiNa/Zhejiang Normal University,0/49
  38. Numerical Simulation and Analysis of Solid-liquid Two-phase Flow in Guide Vane Screw Centrifugal Pump,ZhaoWenJie/Lanzhou University of Technology,0/104
  39. Mechanical Structural Design of Hydraulic Diaphragm Pump,LiuDongHai/Shenyang University,0/71
  40. Study on Structure Design and Manufacturing Technology of Stamping Centrifugal Pump,RenWeiXing/Dalian Jiaotong University,0/13
  41. Medial Axis Transform Method for Meridional Shape Design of Pump Impellers,WangPengFei/Zhejiang University,0/34
  42. Simulation and Test on the Characteristics of Constant-Pressure Variable Displacement Axial Piston Pump,HuWenJing/Dalian University of Technology,0/45
  43. Numerical Simulation and Experiment Research of Anti-cavitation Performance of the High-speed Centrifugal Pump with an Inducer,GuoXiaoMei/Zhejiang University of Technology,0/17
  44. Wireless Condition Monitoring of Pump Group Based on WirelessHART,DongXiaoSu/South China University of Technology,0/11
  45. The Flow Characteristics Analysis and Research about the INP4-40Inner Mesh Gear Pump,WuZuoShan/South China University of Technology,0/16
  46. Research on Performance Prediction of ZA80-50-160Centrifugal Pump and Its Optimization,JinLiangSheng/Zhejiang University of Technology,0/15
  47. Influence of Volute on Non-Overload Performance in the Centrifugal Pump,ShiZuoZuo/Zhejiang University of Technology,0/26
  48. Resesrch on Flow Passage Components and Pump Chamber in the Stamping and Welding Centrifugal Pump,FanWenZuo/Zhejiang University of Technology,0/9
  49. Mechanism and Unsteady Dynamic Characteristics of Leading Edge Cavitation in a Centrifugal Pump,LiXiaoJun/Jiangsu University,0/89
  50. Experimental Investigation and Numerical Model on Flow Instabilities in Centrifugal Pump,RenZuo/Jiangsu University,0/132

Total 21 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile