About 612 item dissertation in line with TP241,Manipulator query results,the following is 1 to 50(Search took 0.037 seconds)

  1. Control System Design and Implementation of Robotic Manipulators for Pick-and-placing GDL,HeChongDong/Huazhong University of Science and Technology,0/14
  2. Rigid-flexible Coupling Dynamics and Control of Flexible Space Manipulator,MaoZhiGang/Harbin Institute of Technology,0/83
  3. Research on Dynamics and Simulation of Double Flexible Manipulators of the Space Station,YinTao/Harbin Institute of Technology,0/33
  4. Research on a Large Space Manipulator Joint and its Vibration Suppression Control,WangDa/Harbin Institute of Technology,0/104
  5. Research on Paramenters Identification and Experimental Platform of Large-scale Space Manipulator Joints,ZhangFei/Harbin Institute of Technology,0/83
  6. The Research of the Space Manipulator Zero-gravity Simulation System,ZhouHang/Harbin Institute of Technology,0/85
  7. Design of High Reliability BLDCM Drive Control System for Space End Effector,ShenLi/Nanjing University of Aeronautics and Astronautics,0/8
  8. Optimal Design of2-、3-、4-DOF High-speed Parallel Manipulators: Theory and Application,LiuSongTao/Tianjin University,0/7
  9. Research on Virtual Simulation and Task Planning of Space Manipulator Teleoperation,LuoMin/Huazhong University of Science and Technology,0/22
  10. Trajectory Tracking Hybrid Control Algorithm Research for the Manipulators,WangChenGuang/Tianjin University of Technology,0/4
  11. Researches on the Control Technology of Manipulator Based on Computer Vision,LiuXiaoKun/Harbin Engineering University,0/90
  12. The Design and Analysis of Octahedral Module Deployable Mast,LiCheng/Harbin Engineering University,0/17
  13. The Static Deviation Analysis and Preliminary Study on Dynamic Deviation of Manipulator,CaoSanYan/Hebei University of Technology,0/13
  14. Impact/Contact Dynamic Modeling and Simulation of Space Robotic Manipulator for On-orbit Servicing,WuXiaoJian/Nanjing University of Aeronautics and Astronautics,0/16
  15. Research on Under Actuated Bionic Manipulator Designation,LiRui/Nanjing University of Technology and Engineering,0/20
  16. Design and Motion Control Study of Steel Arch Installation Mechanical Arm,ZhanChenFei/Henan University of Science and Technology,0/9
  17. The Fuzzy Control of Rigid-flexible Manipulators Based on Low-dimensional-approximate Model,ChenLin/Central South University,0/16
  18. The Design of the System of the Intelligent Creel Robot,GuYingJia/Donghua University,0/18
  19. Dynamics Analysis of Multiple Flexible Wheeled Suspension Mobile Manipulator,LiRui/Hebei University of Technology,0/20
  20. Dynamics Simulation and Structural Optimization for Rail Manipulator of the Garbage Truck,TaoYouPeng/Hunan University,0/68
  21. Dynamics Research of High Speed Cutter Manipulator,FangTeng/Xiangtan University,0/74
  22. Research of Control Strategy for Manipulator with Flexible Joints Based on Lagrange Method,XiaXiaoPin/Anhui University of Engineering,0/26
  23. Collision Dynamics Modeling and Impedance Control of Two-link Manipulator,FangShuiGuang/,0/129
  24. Path Planning and Motion Control of Vibration Reduction of Three-dimensional Space Manipulator,LiuLingHua/Hunan University,0/90
  25. Design and Achievement of Trajectory Planning of the Four-Dof Scara Manipulator,LiuLei/Anhui University of Engineering,0/56
  26. Reasch on Manipulator Servo System Based on Binocular Vision,WangPengYue/Inner Mongolia University of Science and Technology,0/41
  27. The Transient Response and It’s Suppression of Flexible Manipulator Impact Vibration,WangHui/East China Jiaotong University,0/7
  28. Research on Configuration Optimization and Virtual Training System of the Sensory-integrated Operational Prosthesis Hand,ChenChuan/Harbin Institute of Technology,0/28
  29. Research on Subsea7Function Maser-Slave Manipulator and Its Nonlinear Robust Control,LuoGaoSheng/Zhejiang University,0/59
  30. The Excogitation for the Control System of the Pneumatic Manipulator(Robot) Based on PLC,ZhangPingPing/University of Electronic Science and Technology,0/431
  31. The Design of Small Carrying Manipulator Control System Based on Siemens PLC,NiuRuiLi/Nanjing University of Technology and Engineering,0/32
  32. Research on Motion and Mission Planning Methods for On-Orbit Servicing Space Manipulator,ZengZuo/Dalian University of Technology,0/117
  33. Research on Motion Simulation of Robot Based on Java3D Virtual Reality Technology,QianXiaoPing/Zhejiang University of Technology,0/34
  34. Dual Motor Synchronous Driving System Development of Hydraulic Manipulator,ChengLePing/Hangzhou University of Electronic Science and Technology,0/1
  35. Kinematic Calibration of a2-DOF ParallelManipulator,ZhangJiFeng/Zhejiang University of Technology,0/3
  36. Design and Research for the Underactuated End-effector Manipulator,ZhangFei/Zhejiang University of Technology,0/5
  37. Reaserch on the Sling Manipulator of Deposited Cloth Machine,JiangLiKun/Hebei University of Science and Technology,0/15
  38. Design and Implementation of Mechanical Arm Motion Control System,HuoZuo/Ningxia University,0/14
  39. Self-adaptive Trajectory Control of RBF Neural Network SCARA Manipulator,YuanLeiHua/Hubei University of Technology,0/3
  40. Technology Research Based on Fuzzy Control Multiple Degrees of Freedom Robot Arm Control,ChenXuan/University of North,0/13
  41. Iterative Learning Control of Multi-agent Consensus,WuQiaoFeng/Zhejiang University,0/2
  42. Visual Servo of Manipulator to Keep Image Features in FOV,LeiYang/Zhejiang University,0/2
  43. Study on the NC Control System of Frame Cold-bending Machine,ZhouYongQing/Wuhan University of Technology,0/25
  44. The Design and Realization of Five-dimensional Manipulator Assembly System,XiaHaiZuo/Nanjing University of Technology and Engineering,0/7
  45. Research on Vibration Control and Experiment of Piezoelectric Flexible Manipulator,HongZuoZuo/East China Jiaotong University,0/11
  46. Research and Design of Hydraulic Underwater Manipulator Working in a Simulated Environment of Deep Sea,LuKaiYi/Huazhong University of Science and Technology,0/18
  47. Research on the Dexterity Design Method for the Thumb of the Anthropomorphic Dexterous Hand,WangHaiRong/Harbin Institute of Technology,0/55
  48. Research and Development of the Sotfware System for Digital Control of Manipulators to Implant Radioactive Particles for Tumor,ShiYan/Jilin University,0/9
  49. Research on Modeling and Control Method of Pneumatic Flexible Manipulator Polishing on Paint Finish,WangLiXue/Jilin University,0/54
  50. The Design and Research on the AL-0720Manipulator Which Open the Bag with Automatic Shifting Fork,ZhongBin/Lanzhou University of Technology,0/26

Total 13 Pages First Previous 1 2 3 4 5 6 7 8 9 10 Next Last

© 2012 www.DissertationTopic.Net  Mobile