Materials Processing Engineering

About 15103 item dissertation in line with Materials Processing Engineering query results,the following is 451 to 500(Search took 0.020 seconds)

The Optimization and the Application of the Plate Profile Model,LiHuiKai/Northeastern University,0/6
Study on Heavy Reduction Rolling of AZ31B Magnesium Alloy,DingYunPeng/Northeastern University,0/9
Research on Theory and Strategy of PVPC during Plate Rolling Process,HanJie/Northeastern University,0/1
Simulation Study on Deformation Regularity of Rough Rolling Process in Hot Strip Mill,ShiJinFang/Northeastern University,0/4
The Research of Cold Rolled Strip Temperature with Liquid Nitrogen Cooling Condition,LvYongMing/Northeastern University,0/2
Designment of MES System and Realization of Data Exchange on Plate Mill Line,ZhangQing/Northeastern University,0/3
Research and Development of Low Cost500～700MPa Hot Rolled Dual Phase Steel,LiChengNing/Northeastern University,0/6
An Exploratory Study on the Principle of the Fabrication of Ultrafine Grained Magnesium Sheets Using Medium-high Strain Rate Rolling Technique and the Related Fundamental Research,ZhuSuQin/Hunan University,0/4
Microstructure Evolution of Magnesium Alloy AZ31in Deformation Zone by Heavy Reduction Rolling,SunKeMing/Liaoning University of Science and Technology,0/54
Finite Element Simulation on the Recrystallization Controlled Rolling of V-N Micro-alloy Plate,RenSiZhe/Liaoning University of Science and Technology,0/35
Heavy Plate Composite Rolling of the Turnover Machine Stress and Temperature Coupling Analysis and Structure Optimization,WangChao/Liaoning University of Science and Technology,0/13
Study on the Evolution Rule of Steel Plate Surface Scratches in the Rolling Process,HanYue/Liaoning University of Science and Technology,0/25
Study on Temperature Field of Roll during Cold Strip Rolling,YuPeng/Liaoning University of Science and Technology,0/36
Fabrication of Aluminium Alloy Clad Plate by Twin Roll Casting and Study on Its Microstructure and Properties,YangShuai/Liaoning University of Science and Technology,0/49
Research on the Working Stress of Large-scale Backup Roll as Well as the Microstructure and Properties of Surfacing Layer,XingShuLe/Huazhong University of Science and Technology,0/123
Study on Preparation and properties of ultrafine copper twin asynchronous ARB,LiuRun/Kunming University of Science and Technology,0/35
Study on the process of skew rolling forming integral fin tube micro grooved heat pipe,LiYiLong/Kunming University of Science and Technology,0/34
Temperature Field Simulation Study of Plate Straightening Process,LiuLian/Wuhan University of Science and Technology,0/20
Research on Deformation Resistance in Plate Straightening and the Calculation of the Straightening Force,LiChunGuang/Wuhan University of Science and Technology,0/38
Simulation of Thermal Field in Laminar Flow Cooling of Plate,YinZuo/Wuhan University of Science and Technology,0/13
Finite Element Simulation of Plate High-pressure Water Descaling,HuangFuZhou/Wuhan University of Science and Technology,0/20
Finite Element Modeling of Deformation in AA7050during Asymmetric Rolling with Speed Mismatch and Horizontal Displacement,LiXueWen/Central South University,0/15
Microstructure and Texture of Niobium Plates/Foils Fabricated by Different Rolling Methods,XieCheng/Central South University,0/11
An Investigation into Microstructure and Mechanical Properties of Cold-rolled Ti-24Nb-4Zr-7.9Sn Alloy,SunXiaoHui/Central South University,0/14
Research on Processing and Microstructure and Properties of Large Deformation Eutectoid Flat Wire Produced by Continuous Rolling,XiaoQiang/Xi'an University of Architecture and Technology,0/8
Finite Element Simulation on Short Stroke Control of Plate's Vertical Roller,ChenKai/Wuhan University of Science and Technology,0/21
The Study on Recrystallization Behavior and Microstructure of SWRCH22A Cold Heading Steel,DingBei/Wuhan University of Science and Technology,0/31
Finite Element Analysis of Phase Transformation during Laminar Cooling on Hot Strip Rolling,ChengJian/Wuhan University of Science and Technology,0/44
Study of Rolling and Welding Process on Mg-Gd-Y-Zr Magnesium Alloy,QiXin/Hunan University,0/26
Theory Research on Continuous Extrusion and Rolling Process of Copper Strip,YouWei/Dalian Jiaotong University,0/18
Numerical Simulation and Optimization of Ring Rolling Process for Ti₃Al-Nb Based Alloy,LaiXiuDong/Nanchang University of Aeronautics and,0/39
Numerical Simulation and Microstructure Evolution for Hot Rolling Process of Ti-43Al-9V-Y Alloy,ZuoLingJun/Harbin Institute of Technology,0/62
Numerical Simulation of the Shape for304Austenitic Stainless Steel Strip,JiangXiaoYan/Inner Mongolia University of Science and Technology,0/29
Numerical Simulation on Micro-tension Continuous Rolling Process of H-beam with Middle-sized,WuChenXia/Inner Mongolia University of Science and Technology,0/5
Study on Microstructure and Mechanical Properties of AZ31Mg Alloy Multi-pass Hot Rolling Process,FuLiJie/Harbin Institute of Technology,0/169
Research on Microstructure, Texture and Mechanical Properties of ZK61Mg Thin Sheets Produced by Rolling,ChenWenZhen/Harbin Institute of Technology,0/398
Study on Interfacial Property of Steel-Al Bonding Plate with Vibration Rolling Post Treatment,ChenZuo/Beijing Jiaotong University,0/27
Research and performance of aluminum magnesium alloy rolling surface tissue infiltration of solid state diffusion,PanLiJun/Taiyuan University of Science and Technology,0/0
Strong coil design for simulation and step control system,XueXiaoZuo/Taiyuan University of Science and Technology,0/5
Structure analysis and optimization of large scale level down three roller bending machine,GuoYi/Taiyuan University of Science and Technology,0/1
The work roll of hot rolling steel plate temperature field and thermal contour calculation process of software development,HaoLong/Taiyuan University of Science and Technology,0/1
Research on rolling schedule optimization method of dynamic programming and particle swarm algorithm based on,WangQiang/Taiyuan University of Science and Technology,0/0
Study on the Plastic Deformation Behaviour and Numerical Simulation of Forging Process of Ti/Al Powder Compact,ChouZuoYu/Harbin Institute of Technology,0/18
Research on Liquid Forging Technology of Al Alloys End Cover of Special Vehicle,LiuNingNing/Harbin Institute of Technology,0/28
Research on the Technics and Mechanisms of ZK Series Magnesium Alloys during High Strain Rate Forging,WuYuanZhi/Hunan University,0/6
The Precision Forging Process and Die Design for Spur Gear,ZuoKeLong/Huazhong University of Science and Technology,0/28
Study on Stamping-forging Forming Process for Car Clutch Hubs with Gear Shape,ZhengQiu/Huazhong University of Science and Technology,0/8
The Modeling and Simulation of Rod-toggle Press,MengQiangWei/Huazhong University of Science and Technology,0/8
Study on Residual Stress during Thermal Press Forging Processing of2024Aluminum Alloy Sheet,LiDa/Huazhong University of Science and Technology,0/15
Hot Forgings Diameter Size Automatic Measurement System Development,ZhaoYaFei/Huazhong University of Science and Technology,0/10