Dissertation　

About 21743 item dissertation in line with Materials Science query results,the following is 401 to 450(Search took 0.018 seconds)

  1. Study on the Regulation of Microstructure and Mechanical Properties of High Nitrogen Austenitic Stainless Steel,XuGuoFu/Huazhong University of Science and Technology,0/16
  2. The Hydrogen Diffusion Behavior of10CrSiNiCu Steel under Tensile Stress,XuanXiaoYang/Harbin Engineering University,0/31
  3. Investigation on Microstructure and Properties of Spray Forming Al-22Si-5Fe-3Cu-1Mg-xMn Alloy,LiHaiChao/Harbin University of Science and Technology,0/8
  4. Effect of Pour-over Technology and Feeding Cored-wire Technology on Microstructure and Mechanical Properties of Carbidic Austempered Ductile Iron with Chromium,WangJie/Harbin University of Science and Technology,0/12
  5. Research on Material Composition Optimization of Coupler,WangBing/Harbin University of Science and Technology,1/0
  6. Biodegradation and Biocompatibility Evaluation of Mg-3Sn-0.5Mn Alloy,LiuXiWei/Harbin Engineering University,0/35
  7. Research on the Preparation and Abrasive Wear Properties of Ti(C, N)-based Cermets with High Nitrogen Content,ZhouWei/Nanjing University of Aeronautics and Astronautics,0/15
  8. Research on the Interaction Between Low Melting Point Metals and Stainless Steels,ZhaoYan/Dalian University of Technology,0/23
  9. Research on Ti(C,N)-based Cermets with High Strength,Toughness, and Corrosion Resistance,NanQing/Central South University,0/27
  10. The Effects of Trace Ce and Different Quenched Rates on Microstructure and Mechanical Properties of Al-Cu-Li-Mg-Ag-Zr Alloys,WangJing/Central South University,0/11
  11. Study on the Fracture Toughness and Fatigue of Al-3.7Cu-1.6Mg Alloy,XiaLinYan/Central South University,0/23
  12. Effect of Minor Addition Scandium on Microstructures and Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloy,ZengLingXi/Central South University,0/33
  13. Study on the Microstructure and Heat-resistant Properties of Al-Cu-Mg-Ag Alloy,LiuCanWei/Central South University,0/22
  14. Study on Microstructure and Properties of Al-Zn-Mg-Cu-Ti(-Sn) Alloys,YanAn/Central South University,0/9
  15. Study on Microstructure Evolution and Number Simulation of the High-temperature Deformation of TiAl Alloy,LuBin/Central South University,0/29
  16. Study on Dynamic Mechanical Behavior and Microstructure Evolution of an Ultra-Fine-Grained High Carbon Steel under the High Strain Rates,GuoZhiQiang/Henan University of Science and Technology,0/5
  17. Research on the Microstructure, Properties and Thermal Shock Resistance of Nano-TiN Modified Ti(C,N)-based Cermets,ZhangHongLiang/Hefei University of Technology,0/33
  18. The content of C and the effect of open cold deformation on the mechanical properties and corrosion behavior of 316L stainless steel,HouXiaoZhen/Kunming University of Science and Technology,0/76
  19. Development of Nb alloy microstructure and properties of SAE9310 steel,ZhangZhiZheng/Kunming University of Science and Technology,0/76
  20. Study of ultra high strength steel phase change process and the optimization of heat treatment,FangPing/Kunming University of Science and Technology,0/97
  21. Study on strength and toughness of grain control unit of low carbon martensite steel,DengCanMing/Kunming University of Science and Technology,0/59
  22. Effect of Cu elements on the corrosion resistance of non oriented electrical steel microstructure, texture and the,HuangXi/Kunming University of Science and Technology,0/76
  23. Effect of grain refining on Microstructure and properties of ZA4-1 alloy,ZhaoQiZuo/Kunming University of Science and Technology,0/32
  24. Study on the corrosion and passivation behavior of 15Cr super martensitic stainless steel.,ZuoJiaQun/Kunming University of Science and Technology,0/98
  25. Study on the role of vanadium in high toughness wear-resistant steel.,LiXiaoXian/Kunming University of Science and Technology,0/86
  26. The two foaming fundamental study on the preparation of ZL111 alloy foams,ZhaoMingWei/Kunming University of Science and Technology,0/19
  27. Study on banded structure analysis and control process of ultra high strength steel,WangQi/Kunming University of Science and Technology,0/102
  28. Basic research of Ti MICROALLOYED STEEL and titanium in nonmetallic element interaction,WangDong/Kunming University of Science and Technology,0/105
  29. Research on fabrication of aluminum foam vacuum foaming,WangJun/Kunming University of Science and Technology,0/33
  30. The Research of Vanadium Precipitation in Non Quenched and Tempered Microalloyed Oil Well Pipe Steel,YinLiMin/Shanghai University,0/3
  31. Effect of Rare Earth on the Microstructure, Properties and Texture of α-Mg-Li Alloy,CuiChongLiang/Harbin Engineering University,0/106
  32. Thermodynamic Investigation of Systems Concerning Heat-resistant Aluminum Alloys Strengthened by L12Phase,BaoHong/Central South University,0/119
  33. Research on Damping and Microplastic Behavior of Pure Mg and Mg Alloys,FanGuoDong/Harbin Institute of Technology,0/145
  34. Microstructure and Mechanical Properities of Mg-3Sn-2Sr-Ca/Re/Ti Magnesium Alloys,QinCaiYuan/Chongqing University of Technology,0/75
  35. In vitro Dynamic Degradation Behavior of Mg Alloys in the Presence of Proteins,XieLin/Chongqing University of Technology,0/37
  36. Development of HIC-resistance X65Pipeline Steel,DuYi/Wuhan University of Science and Technology,0/56
  37. Studies on the Microstructure and Properties of the Biomedical Ti-Mn Alloy,LiAiDong/Harbin Engineering University,0/44
  38. Study on Microstructure and properties of high nitrogen stainless bearing steel,ZhengTao/Kunming University of Science and Technology,0/94
  39. Studies on the Preparation and Properties of Porous Ti-based Metallic Materials for Biomedical Applications,HouLeGan/Harbin Engineering University,0/121
  40. Research on Dry Sliding Friction and Wear Characteristics of Al-20Si-5Cu Alloy,TongQiangQiang/Jiangsu University of Science and Technology,0/1
  41. Investigation of Localized Corrosion Behavior of Low-nickel Duplex Stainless Steel LDX2101and the Influence of Heat Treatment,TangRuiRui/Jiangsu University of Science and Technology,0/3
  42. A Study of the Isothermal Section of Some Ternary Systems in the Mg-Y-Nd-Gd,XiaoLong/Central South University,0/16
  43. The Effect of New Thermo-mechanical Treatment on Microstructure and Property of Aluminium Alloy,RenJieKe/Central South University,0/8
  44. The Research on Microstructure and Properties of New Type of High-boron High Speed Steel,WuZhongJia/Central South University,0/27
  45. Microstructure and Properties of72Cu-Zn-Al Alloy after Micro-alloying,ZhengYingPeng/Central South University,0/11
  46. Effect of Sn Microalloying on Microstructure and Properties of Al-Zn-Mg-Cu-Zr Alloy,ChenZuo/Central South University,0/16
  47. Effect of Stabilizing Annealing Temperature and Processing on Microstructure and Properties of5383Aluminum Alloy,ZhanGe/Central South University,0/32
  48. Microstructure and Properties of Zn-1.0Cu-0.2Ti Alloy with Trace Cr, Mg Element,WangYan/Central South University,0/6
  49. Finite Element Simulation of ASB in Fine-grained Tungsten Alloy under Impact Loading,ZhengChunXiao/Central South University,0/28
  50. Phase Relations and Interfacial Reactions of Cu-Ni-Ti Ternary System,ZhangHang/Central South University,0/6

Total 435 Pages First Previous 5 6 7 8 9 10 11 12 13 14 Next Last

© 2012 www.DissertationTopic.Net  Mobile