Dissertation > Excellent graduate degree dissertation topics show

Research on 3D Dynamic Simulation Technology for Special Helical Pole Machining Process

Author: XuYinLong
Tutor: NiuLianQiang
School: Shenyang University of Technology
Course: Applied Computer Technology
Keywords: Modeling Special Helical Pole Simulation Algorithm of Calculating Intersection Interference
CLC: TP391.9
Type: Master's thesis
Year: 2006
Downloads: 112
Quote: 1
Read: Download Dissertation

Abstract


The technology of manufacture about helical rotor is vital to the manufacture of various helical poles, such as helic-borer and helic-pump. Since 1994, the CNC Research Center in Shenyang University of Technology has pursued research on the technology of manufacture about complex special helical pole. It firstly put forward the non-instantaneous pole envelope method in China, and pursued systemic research on the theory of envelope method and NC programming method, then acquired a lot of achievements, based on which, this paper researched on the simulation of machining process of special helical pole, and developed the three-dimension graphic dynamic simulation system on basis of non-instantaneous pole envelope method.This paper analyzed and discussed the interrelated theory of computer graphics, visual simulation method, non-instantaneous pole envelope method about CNC machine and the three-dimension graphics modeling method. With triangle graphic element as the main modeling tool we established the simulation model of machining special helical pole. This paper emphatically researched on the problem of calculating the intersection point between workpiece that rotated with variational angle velocity and milling cutter that moved with complicated track and rotated with high speed. Method of expressing special helical pole in PC by defining a height buffer area and discretizing curve surface for milling cutter are proposed, based on which a new algorithm of calculating the intersection between workpiece and milling cutter are argued. The problem of transformation and storage of data on the machining process was resolved as well on basis of the relative movement state of the workpiece and milling cutter, which largely reduced the calculation in the simulation.In order to improve the quality of graphics, this paper also discussed further the problem of display the dynamic manufacture process with three-dimension graphics. It described the algorithms of display the workpiece under particular expression method and milling cutter withbetter graphics reality sense. Eventually by use of C++ and OpenGL, simulation for the whole machining process of a special helical pole is realized, which is satisfying on machining velocity and effect.Furthermore, this paper researched on other interrelated issue, such as interference judgment and curve interpolation, and resolved them on the simplified model. By the algorithms mentioned above, a integrated simulation system for special helical pole machining process is developed. It makes control manufacture combines with the whole complex screw pole manufacture process such as parameters input, selection of milling cutter, interference judgment, interpolation computing, three-dimension simulation and numeral code, in order for the guide of theory research and manufactural practice.

Related Dissertations

  1. The Setting Bases of Working Pressure in LNG Systems and Orthogonal Experiment Design of Heat Exchangers,TQ051.5
  2. The Realization of Coal Liquefaction in the Continum Model System and the Experimental Research of Coal Liquefaction,TQ529.1
  3. Soft Sensor of Naphtha Dry Point on Support Vector Machines Regression,TE622.1
  4. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  5. Research on Mechanism Analysis and Modeling Simulation of Horizontal Well Tractor,P631.83
  6. Research on Optical Surface Testing with Interferometers,TG84
  7. Coupled Calculation of the Solidification Paths of Ternary Eutectic Alloys Based on Thermo-Calc,TG111.4
  8. Study on Springback of High-Strength Steel Stamping,TG386
  9. Numerical Simulation and Experiment on Hydroforming of Cups with Controllable Radial Pressure,TG386
  10. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  11. The Brake Performance of Hydraulic Retarder and Simualtion Research on Its Application for Aircraft Arrestment,TH137.331
  12. Numerical Study of the Effect with Straight and Bowed Stator in Different Axial Gaps,TH45
  13. Tooth Profile Modeling and Machining Error Analysis of the Face Gear,TH132.41
  14. Satellite Attitude Determination Based on Gyro and Star Sensor,V448.2
  15. Numerical Simulation of Film Cooling in Turbine Cascade with Non-Axisymmetric Endwall Method,V231.3
  16. Research on Orbital Control Method for Space Rendezvous and Docking,V526
  17. High Speed Aerodynamic Convection and Coupled Heat Transfer of Complicated Bodies,V215.4
  18. The Analysis on Characteris of Vibration Source about Vertical Vibration of Surrounding Environment Induced by Rail Transit,U211.3
  19. Single Neuron PID Control for Electro-Hydraulic Servo Unit of Ship Rudder,U666.152
  20. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  21. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4

CLC: > Industrial Technology > Automation technology,computer technology > Computing technology,computer technology > Computer applications > Information processing (information processing) > Computer simulation
© 2012 www.DissertationTopic.Net  Mobile