Dissertation > Excellent graduate degree dissertation topics show

Molten prepared Fe-Cu -based synthetic alcohol fuel catalyst and its performance

Author: TianYanMing
Tutor: SuYunLai
School: Zhengzhou University
Course: Industrial Catalysis
Keywords: syngas melting method Fe-Cu higher alcohol fast cooling Ru Pd
CLC: TQ426.94
Type: Master's thesis
Year: 2006
Downloads: 131
Quote: 1
Read: Download Dissertation

Abstract


With the increasing demands for mobile fuel and environmentally benign, much attention has been paid to higher alcohol synthesis from coal or natural gas via syngas due to its properties as the alternative motor fuel. Among the catalytic systems for higher alcohol synthesis, Fe-Cu catalysts appeared to be promising for its higher activity and mild operation conditions and low cost was widely investigated.In this paper, the Fe-Cu catalysts prepared by fast cooling melting method with distilled water were systematically reviewed for the first time. A series of characterization techniques including X-ray diffraction （XRD）, temperature programmed reduction （TPR）, H2 temperature-programmed desorption （H2-TPD） and CO-temperature-programmed desorption （CO-TPD） were employed to investigate the effect of catalysts on the surface structure, physical properties, the adsorption and activation of CO and H2. Meanwhile, the relation between the surface structure and the capability of CO hydrogenation was also discussed. At the same time, the influence of the cooling methods on the catalyst prepared by melting method was systematically reviewed. In the base of oriental catalysts, noble metal Ru and Pd were loaded into Fe/Cu-based synthesis catalysts in order to review their effects on the surface structure and the reaction performance.First, the fusing volt was differed during the preparation of catalysts, and thus the fusing temperature indirectly changed. The effect of fusing volt on the reaction performance, the reduction capability and the surface structure was examined. Based on the above experiments, 150V was confirmed the optimal volt.The ratio of main component Fe and Cu was changed to investigate the influence of ratio on the surface structure and the reaction performance. As a result, optimal Cu/Fe ratio was obtained. The best ratio is 2.5, when cooled in normal temperature, but Cu/Fe=2.0 when fast cooling method was taken. Meanwhile, we found that, the higher alcohol productivity and the C2+OH selectivity of the catalyst samples cooling in normal temperature were evidently higher than those with fast cooling. Moreover the outgrowth with cooling in normal temperature cooling was only 40% of that of fast cooling.On the base of the original catalysts, more catalytic carrier K was introduced into Fe/Cu-based catalysts in order to review the law on the change of surface structure and reaction performance. With regard to normal temperature cooling

Related Dissertations

  1. Experimental Research on Concretion Characteristics of High Temperature Syngas in Integrated Gasification Combined Cycle System,TM611.3
  2. Study on Synthesis Intermediate of Vinyl Acetate Ethylidene Diacetate from DME and Syngas,TQ225.12
  3. Multi-walled Carbon Nanotubes Au _AT_ of Pt, Au _AT_ of Pd core-shell structure of the catalyst preparation and electrochemical properties of,O643.36
  4. The Study of Anode Catalyst Pd/C for Direct Formic Acid Fuel Cell,O643.36
  5. Pd-based cathode catalysts of direct methanol fuel cell,O643.36
  6. Algorithm Research for Robot Trajectory Tracking Control,TP242
  7. Catalytic Study of Hydrogen Peroxide Synthesis Directly from H2 and O2,TQ123.6
  8. The Non-Linear Mixed Effect Models in Population Pharmacokinetics and Its Discussion Based on Stochastic Differential Equations,R911
  9. Study on Brazing Process and Mechanism of Si3N4 Ceramic Joint Brazed by Au-Ni-V-Pd High-temperature Filler Alloy,TQ174.6
  10. Based on Three Substances Quenching the Ru（bpy）32+-TPrA Electrochemiluminescence,O644.1
  11. The Study of Structure Property and Catalytic Activity of Pd/CeO2 Oxidation Catalyst,O643.36
  12. The Clinical Study on the Therapy Effcet Chemotherapy Combined with Runing Tang for the Patients of Postoperative Breast Cancer,R737.9
  13. Research on Precise Tension Controller of Fiber Winding and Placement Machine,TP273.5
  14. RuTi based monolayer film as diffusion barrier of copper interconnect,TN305
  15. Immune Responses Elicited in Hepatitis B Virus Transgenic Mice by B7-H1 and HBsAg Vaccine,R512.62
  16. Study on Preperation, Characterization and Application of Pd/γ-Al2O3/Cordierite Monolith Catalyst,TQ426
  17. Study on PdCl2-CuCl2 Catalyst for Carbon Monoxide Catalytic Oxidation at Room Temperature,X13
  18. Determination of the Real Surface Area of Polycrystalline Pt and Pd electrodes and Preliminary Study of the Oxygen Reduction Reaction Activity of Pd@Pt Electrodes,O646.54
  19. Algorithm based on complex wavelet transform partial discharge signal extraction,TM83
  20. Mouse PD- 1 , CD152, of FOXP3 LAG -3 promoter cloning and identification of its mediated multicolor fluorescence protein carrier construction,Q78
  21. The Study of Pharmacokinetics of Pd-Ia,R285.5

CLC: > Industrial Technology > Chemical Industry > Reagents and the production of pure chemicals > Catalyst ( catalyst ) > Chemical Industry Catalyst
© 2012 www.DissertationTopic.Net  Mobile