Dissertation > Excellent graduate degree dissertation topics show

Optimization Design & Technical Study on Antireflection Coating System

Author: SunShaoNi
Tutor: ZhangYiChen
School: Northeastern University
Course: Fluid Machinery and Engineering
Keywords: Antireflection coating Optimization design Simplex method Technical study
CLC: TB383.2
Type: Master's thesis
Year: 2006
Downloads: 706
Quote: 5
Read: Download Dissertation

Abstract


The design, optimization and growth technics of antireflection coatings were systematically studied in this paper. Using the simplex method, the antireflection coatings based on K9 glass were designed by a computer program. Growth parameters on the monolayer SiO2 and Ta2O5 coatings were studied, and the multi-layer SiO2/Ta2O5 antireflection coatings with high transmittance in visible light wave band were gained.In the first part of the paper, the application and develop status of antireflection coatings were analysed.In the design of multi-layer coating system, according to the theory of optical thin film, it had been given all design results of multi-layer antireflection coatings and corresponding spectrum characteristic curves, using advanced computer language MATLAB. In order to improve the antireflection effect, the author optimized multi-layer system by simplex method. As a result, a multi-layer antireflection coating system with higher transmittance was gained, whose theorial transmittance could universally reach 99% in visible light band. According to optimized theorial coating system, the specimen was produced and the optical transmittance could be over 96%97%.According to the optimized results, K9 glass whose n=1.52 was selected as substrate. SiO2/Ta2O5 multi-layer coatings were deposited by RF reactive magnetron sputtering. Influence of deposition parameters on monolayer SiO2 and Ta2O5 were studied, respectively, on which that deposition of multi-layer coatings were based.In the technical research, the influence of various growth parameters, including oxygen content, substrate temperature, work pressure, etc., on the optical properties and structures of the coatings were studied. The deposition rates of monolayer SiO2 and Ta2O5 were gained, respectively. The results showed that oxygen content strongly affected the refractive index of the film: the film grown in the Ar/O2 sputtering gaseous mixture of oxygen content higher than 13% had steady refractive index used in design, while over 80% in Ta2O5 film growth.

Related Dissertations

  1. Development of the Platform for Compressor Optimization Design and Aerodynamic Optimization Design in the Transonic Compressor,TH45
  2. Investigation of Turbine S2 Stream Surface Direct Problem Aerodynamic Optimization Design,V235.11
  3. The Dynamic Performance Analysis of Oil Pumping Center and Structural Optimization of Improvement,TE933.1
  4. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  5. Medical Application of a Wireless Communication Platform Based on RFID and GPRS,R319
  6. The turbofan engine pneumatic runner Optimization Approach,V235.13
  7. Concrete Tied Arch nonlinear mixed- discrete variables optimization design,U448.225
  8. Research on the Manufacturing Technology of Automotive Double-wall Curly Brazed Tubes,TG457.6
  9. Structural Strength and Vibration Analysis of the Turbo-generator Stator,TM311
  10. The Measures on Control in Amount of Steel Bar in Reinforced Concrete Structure of Multi-Storey and Tall Residential Buildings,TU973.12
  11. Dynamics Analysis and Optimization of the Gear Tranmission System for a Opto-Electronic Stabilization Platform,TH132.41
  12. Aerodynamic Optimization Design and Analysis of Aerodynamic Damping of Wind Turbine Blade,TK83
  13. Research of Product Optimization Design Based on QFD and DOE,F273.2
  14. Optimal Design of Dynamic Response for the Wind Turbine Blade,TK83
  15. Research on Optimum Design of a Container Ship Based on Response Surface Methodology,U674.131
  16. Mechanical Properties Analysis of Diaphram Springs,U463.211
  17. Calculation and Study on Structure Strength of Twin Hull Sand Dredge,U661.4
  18. The Research on Noise Control in Bag-filter System with Numerical Simulation,X701.2
  19. Study on the Optimization Design of Light Portal Frame Steel Structures,TU392.5
  20. Research on System Identification Based on Linear Programming Method,O221.1
  21. Straightening Process Simulation of Large Steel Straightener and Process Parameter Optimization,TG333.23

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile