Dissertation > Excellent graduate degree dissertation topics show

High-resolution time interval measuring instrument control software design

Author: YeChao
Tutor: ShiZuoBing
School: University of Electronic Science and Technology
Course: Measuring Technology and Instruments
Keywords: Time-Interval Measuring Virtual Instrument Code Density Test
CLC: TH714
Type: Master's thesis
Year: 2006
Downloads: 179
Quote: 1
Read: Download Dissertation

Abstract


Time is not only the basic parameter in our daily life and work, but also one of seven elements in the SI. The precise time-interval measuring is widely used in all kinds of scientific experiments, especially in some large-scale physical experiments such as detonation experiment and particle acceleration experiment, in which some important parameters are obtained by time-interval measuring. The High Precision Time-Interval Measuring Instrument(HPTIMI) is manufactured for the rigorous requirement such as high precision, high stability and multi-channels in detonation experiment and particle acceleration experiment.The main contributions of this dissertation include:1. Aiming at the use of the instrument, the application of time-interval measure in detonation experiment is introduced. Furthermore, the importance of HPTIMI in detonation experiment and its foreground are analyzed.2. To implement the conversion of signal, a multi-channel time/data convert module with high precision and programmable time resolution is used. Its characters and usages, including the theory and the software configuration program by using the chip SN74|ACT8990, are introduced in the dissertation.3. PCI bus is used to accomplish the computer interface in HPTIMI. The procedure to design the driver of HPTIMI based on Windriver is illustrated.4. HPTIMI is a typical virtual instrument. The characters, advantages, domestic and foreign status and developing direction of virtual instrument, are inroduced briefly. And the design process of control software of HPTIMI in the environment of Labwindows/CVI is also presented. The primary data exchang mechanism among the contol units of HPTIMI and the corresponding program flow charts and their programmimg approaches are expatiated.5. To reduce the nonlinearity of system for improving the precision of HPTIMI, the calibrated data must be sent to the control software. Code Density Test, which is used to gain calibrated data, is recommended in the dissertation. The test result of the nonlinearity and precision of the HPTIMI is given.

Related Dissertations

  1. Study of Automobile Ignition Coil Testing System Based on Standard LAH032.905,U472.9
  2. Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
  3. Research and Application of Remote Virtual Instrument Experimental Teaching System Based on LabVIEW,TP391.6
  4. The Research and Application of Virtual Instrument Technology in Sensor Intelligent Measuring System,TP212
  5. Development of Measurement System for Charge Carrier Mobility Based on Virtual Instrument,TN304
  6. Study on the Theory of Electromagnetic Detection and Development of Virtual Instrument for Steel Rope Broken Wire,TD532
  7. Analysis and Research Vibration Property of AC Motor on Variable Frequency Adjustable Speed System,TM34
  8. Study and Development of Power Quality Monitoring System Based on Virtual Instrument Technology,TM711
  9. The On-line Calibration System of High-voltage Current Transformer Based on Virtual Instrument,TM452
  10. Research on Calibration Technology of Electronic Transformers,TM45
  11. Design and Realization of Launcher Integrated Test System Based on DSP and FPGA,TJ06
  12. The circuit of the digital technology of virtual instrument and,TP274
  13. The Software Testing and Reliability Analysis Based on Oil Well Logging Instrument,TP311.52
  14. Monitoring system of embedded Amplitude Modulation,TN934.1
  15. Study on Precision Digital Measurement Method of High Frequency Signal Based on Low Sampling Rate,TN911.7
  16. The Research of Family Intelligent Alarm System Based on LabVIEW,TP277
  17. Study on High Precision Barometer Technology,TP212
  18. Research of Measurement and Control System for Sling Stretch Test Machine Based on Virtual Instrument,TP273.5
  19. Research of Detecting System for A Missile Weapon on PXI Bus Technology,TJ760.6
  20. Study on the Technology of LabVIEW in Shuttle Kiln Combustion Monitor and Control System,TP277
  21. Design and Development of the Monitoring Software for the CNC Press Brake System Based on Lab Windows/CVI,TP277

CLC: > Industrial Technology > Machinery and Instrument Industry > Instruments, meters > Measuring instruments > Time - measuring instruments
© 2012 www.DissertationTopic.Net  Mobile