Dissertation > Excellent graduate degree dissertation topics show

Design of Servo-Control System of PMSM Based on IRMCK201

Author: ZhangCheng
Tutor: WangFuDong
School: Suzhou University
Course: Control Theory and Control Engineering
Keywords: PMSM IRMCK201 PIC30F2010 Magnetic Powder Brake
CLC: TM341
Type: Master's thesis
Year: 2011
Downloads: 33
Quote: 0
Read: Download Dissertation

Abstract


IRMCK201 is designed to development of permanent magnet synchronous motor drive control chip by IR company. Compared to the general-purpose MCU / DSP, it can simplify system design, shorten product development cycles. However, due to the complexity of the servo control system and the lack of technology support from IR company, to achieve high-performance PMSM control, a variety of parameters of IRMCK201 must be set correctly and analysis deeply.This paper takes 110SFM-E02030 3-phase ac permanent magnet synchronous motor (PMSM) as control object and studys the research of model of PMSM & its control theory. Firstly Simulation results show that the vector control method has a good dynamic control performance through servo system simulation experiment in MATLAB/simulink. Secondly the ac servo control system based on IRMCK201 has been designed and developed. We select IR company’s intelligent power module as the core device of driving circuit, using PIC30F2010 as the main control chip of human-machine interface and test system, through SPI communication mode to the realize the state parameter setting and reading of IRMCK201. We designed drive circuit of servo system, detection circuit, drive circuit protection circuit and display circuit hardware structure detailedly .Thirdly we developed software components of the servo system ,including the system master program, PIC30F2010 communication program with IRMCK201.In speed mode of System, the constant speed control and constant torque control are the two main applications. For both applications, the magnetic powder brake designed as a load in PMSM performance test systems. The performance of system is tested under different conditions, and test results are analyzed.

Related Dissertations

  1. Study on Drive and Control System of Five-Phase PMSM Based on FPGA,TM341
  2. Initial Rotor Position Estimation for PMSM,TM341
  3. Analysis and Control of 6-DOF Electrical Driven Parallel Manipulator,TP242.2
  4. The Research of Pmsm Servo System Based on IRMCK201,TM341
  5. FPGA-based AC Servo System,TM34
  6. The Research on Control System of Sensorless PMSM,TP273
  7. Research on the Digital Servo Driver for the Permanent Magnet Synchronization Motor,TM341
  8. Based on sliding mode variable structure control of permanent magnet synchronous motor servo system,TM341
  9. The Study of Control System in Industrial Sewing Machine Based on DSP,TM921.5
  10. Research on 42V Power Supply System Used in Hybrid Electric Vehicles,U463.6
  11. AC permanent magnet synchronous motor servo system design,TM341
  12. Research of Constant-Tension Control Strategy in Gravure Press Machine,TS835
  13. Simulation and Analysis on Control System of PMSM for the Decoiling Auto-Line,TM341
  14. Research on the PMSM Control System of Pumping Unit,TM341
  15. Study on the Key Technique in Design of Permanent Magnet Synchronous Motor for Metro,TM341
  16. Research of DSP-Based Control System for Permanent Magnet Synchronous Motor,TM341
  17. Theoretical study of the direct torque control of permanent magnet synchronous motor,TM341
  18. Study on Permanent Magnet Synchronous Motor and Drive System in Electric Vehicle Application,TM351
  19. Study on Control System Protection and Communication Technology in Electric Vehicle Application,U469.7
  20. Study on PMSM Drive System of the Hybird Electrical Vehicle,TM351
  21. The Design and Realization of DSP-Based Permanent Magnet Synchronous Motor Servo Control System,TM341

CLC: > Industrial Technology > Electrotechnical > Motor > AC motor > Synchronous motor
© 2012 www.DissertationTopic.Net  Mobile