Dissertation > Excellent graduate degree dissertation topics show

Studies on Modification Mechanisms of Hypereutectic Al-Si Alloys

Author: ZengBin
Tutor: LiaoShiJie
School: Xiangtan University
Course: Materials processing
Keywords: Hypereutectic Modification Primary Si Eutectic Si TPRE
CLC: TG156.9
Type: Master's thesis
Year: 2006
Downloads: 487
Quote: 5
Read: Download Dissertation

Abstract


Al-Si hypereutectic alloys are widely used in industries and Hi-Tech areas, but coarse primary Si phase in casting is detrimental to the mechanical properties of the alloy. Therefore, refinement of primary silicon has been received great interest from metallurgists.The recent condition of modification and refinement of Al-Si alloys and the removal of impurities from Al alloys are described in this thesis. The modifying efficiency of vary modifier were compared in experiments. The main results and the conclusions are following:(1)The excellent modification efficiency on hyper-eutectic Al-Si alloys could be obtained through the addition of Cu-P master alloys. Examination of the microstructure and fine chemical compound of the alloy by SEM techniques shows that there is AlP compound in primary silicon. Analysis of effects of phosphorus element on silicon crystal in the hypereutectic Al-Si alloy shows that AlP acts as heterogeneous nuclei. It is consistent with many researcher’s point.(2) In the experience Salt、Sb and thulium can change primary Si and eutectic Si through changing the morphology, but the effect of modification is very defferent. Salt is the best. Sb is better than thulium. The modification of modifying elements addition on Si takes effects through TPRE mechanics. The preferential absorption of modifying elements poisons the growth steps, preventing the anisotropic development of Si crystals, leading to multiple twining within Si crystals and the isotropic but still faceted growth. The difference in growth environment between primary Si and eutectic Si (cooperative growth withα(Al)) makes the experience different.(3)The effects of heat treatment on the microstructure of Al-20wt%Si were studied. The results show with the extension of solution time, the dissolution of a fraction of eutectic Si takes place through fragmentation of the phase.

Related Dissertations

  1. Optimizition of Compositions and Processing Parameters and Wear Properties of Cemented Carbides YG11R Modified by Nanosized Rare Earth,TG135.5
  2. Research of High Speed Image Pre-processing System Based on FPGA,TP391.41
  3. First- principles calculations of doped anatase titanium dioxide photocatalytic properties,O643.36
  4. Synthesis and Performance Study of Bisphenol AP-based Polybenzoxazines,TQ320.1
  5. Synthesis and Biocompatibility of different types of hydrophilic surface - modified polyurethane,R318.08
  6. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  7. Research on the Interface Modification of Epoxy Resin/Metallic Substrates and Epoxy Resin/Pigment,TQ630.1
  8. The Effects of Exposure to Bisphenol-a between Adolescence and Early Adulthood on Behaviors in Mice and Its Molecular Mechanism,R965
  9. Effect of Single and Double Mutations of Yeast H3K79L、H4K20L on the Function of ELP3 and Expression of SSA3,Q75
  10. Synthesis of Silver Nanoparticles on Modified Multi-walled Carbon Nanotubes and Their Antimicrobial Effects,TB383.1
  11. Modification of Ceramic Membrane and Its Use in MD,TQ028.8
  12. Nano- TiO 2 Photocatalytic Preparation and characterization of composite films,TB383.2
  13. Of dual responsive material for the surface modification of the aromatic polyamide film,TB383.2
  14. Study of Collagen Modifying Cotton Fabric,TS195.6
  15. Research on the Pellet by Microwave Modified Sodium Bentonite,TF046.6
  16. Studies on Fabrication of Superhydrophobic with High Adhesion Force Surface on Aluminum Substrates,TG174.4
  17. Compound Modification and Photochemical Catalysis Property of Nano-TiO2,TB383.1
  18. Surface Modification of Magnesium Hydroxide Nano-particles and Its Application in Flame Retardant Polypropylene Composites,TB383.1
  19. Synthesis and Application of the Novel Branched Polyethylene Glycol for Low Molecular Weight Medicine Modification,TQ460.4
  20. A Study on Modification of Oat Protein Isolate,TS201.21
  21. Preparation and Propeties of Polyolefin/Nano-Mg（OH）2 with Non-halogen Flame-retardant Cable Materials,TB383.1

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Heat treatment > Heat treatment process > Special heat treatment
© 2012 www.DissertationTopic.Net  Mobile