Dissertation > Excellent graduate degree dissertation topics show

Air compressor frequency and microcomputer automatic control system research

Author: BaiKunHai
Tutor: WeiShouShui
School: Shandong University
Course: Control Engineering
Keywords: variable frequency speed control fuzzy control constant pressure air feeding PID control microcomputer automatic control
CLC: TP273.5
Type: Master's thesis
Year: 2006
Downloads: 318
Quote: 3
Read: Download Dissertation

Abstract


Constant pressure air feeding system serves as an important power apparatus of several typical fields involving the vehicle department of railway, marshalling yard, etc. Moreover, appropriate and correct operating way of air compressor motor of this system is significant when it comes to secure manufacture and energy conservation. There are nearly 1000 sets of railway systematic hump air compressor motors in our country, most of which, however, rely on the traditional method of relay control. Facing the problems prevalently existing in the traditional way of relay control such as vast energy consumption and instability in the operating process and on the basis of frequency conversion controls and energy-conserving idea, the article designs the hardware equipment for air compressor parameter gathering and the frequency conversion control and also devises the microcomputer automatic control software system.Depending on and also supporting to the hump press empty aircrew control in the west station of the Jinan railroad sub-bureau, the project structurally adopts two grades of control framework in which the industry computer (IPC) and PLC, respectively, function as the controlling machine and logic control machine of the air compress, and selects the frequency conversion labor frequency alternately parallel operation method. The reliable electrical chain-like safeguards its electricity security, carries out the entire function protection through the frequency changer to the electric motor.With reference to the control strategy, the project uses fuzzy PID control systems. According to conditions of constant pressure air control system, the item uses the frequency conversion adjustment and the fuzzy control technology to carry out on-line from the installation to the PID parameter; and according to the system mode quick-adjusting air-supply system working pressure, we can achieve the constant pressure air feed. The pressure changes delivers of the equipment exports will actually transform the pressure signal into the standard electrical signal which is input to the PID regulator, and then carry on the comparison with the hypothesis signal, by processing proportional, integral, differential computation, we will obtain the optimizing control parameter to control the energy conservation output of frequency conversion velometer, thus the control motor rotational speed will drive the air compressor to use the spirit and the pressure request frequency conversion velocity modulation energy conservation movement

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  3. Research on Ducted Fan Unmanned Vehicle Autonomous Modeling and Control Strategies,V249.122
  4. Research on the Control and Remedy of Nanopositioning Stage Drived by Piezo Material Lead Zirconate Titanate,TP273
  5. Design the Control System of Ocean Wave’s Simulation Table Based on Theory of Fuzzy Turning PID,TP273.4
  6. Study on Adaptive Fuzzy Control Algorithm and Its Implementation,TP273.4
  7. The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
  8. Control System of Rotary Drying for Flake Agricultural Materials,S226.6
  9. Design and Research of a Multi-Use End-Effector for Harvesting Robot,S24
  10. The Design of Experimental Device for Mine Motor Soft Starter,TM343.2
  11. Medium Density Fiberboard Drying System and PLC Control System Design,TP273
  12. Design of Intelligent Supervisory Control System for Wastewater Treatment,TP277
  13. Research on Grinding and Classification Process Control of Sijiaying Concentrator,TP29-A1
  14. Research on pH Value of the Control Technology for Acid-contained Wastewater Integrated Treatment System in Ningxia Hengli,TP273
  15. Study on Industrial Boiler Water Level Control System,TP273
  16. The Vibration Synchronization and the Control of Amplitude in Sharp Resonance Vibration Machine,TB535
  17. Intelligent traffic signal control based on fuzzy logic method and simulation research,U491.54
  18. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  19. Fuzzy Control System Design of Transformer Cooler,TP273.4
  20. The Research and Application of PID Parameters Self-tuning,TP273
  21. Study on Autoleveller System of Drawing Frame Based on Adaptive Control and Fuzzy Control,TS103.3

CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system > Computer control, computer control system
© 2012 www.DissertationTopic.Net  Mobile