Dissertation > Excellent graduate degree dissertation topics show

Multi-wavelength cladding-pumped Er3 + / Yb3 + co-doped fiber laser

Author: LiYao
Tutor: YuanShuZhong
School: Nankai University
Course: Optics
Keywords: fiber laser fiber amplifier multi-wavelengths birefringence fiber grating polarization hole burning output characteristics fiber loop mirror erbium-ytterbium co-doped cladding-pumped all-fiber
CLC: TN248
Type: Master's thesis
Year: 2005
Downloads: 142
Quote: 0
Read: Download Dissertation

Abstract


In the new generation of ultra speed fiber communication systems, the wavelength-division-multiplexing (WDM) system has become the subject of numerous studies for its reconfiguration, transparency and compatibility. The development of WDM technology calls for new demands for optical devices, which accelerates the emergence of various novel passive and active optical fiber components. As the key technology in WDM system, erbium-doped fiber lasers and amplifiers have acquired more attentions for their inherent advantages. Multi-wavelength erbium-doped fiber lasers and cladding pumped erbium-ytterbium co-doped fiber lasers are the main research subjects in this paper, and the main content is listed as below:1. Experimental study on multi-wavelength erbium-doped fiber lasers:1) The property of dual-wavelength switchable erbium-doped fiber laser is experimentally studied. By utilizing birefringence fiber Bragg grating as the wavelength selective component and different settings of the polarization controller, stable dual-wavelength laser output is obtained at room temperature. The wavelength spacing between adjacent lasers is 0.52nm, and the laser amplitude variations are both less than 0.2dB.2) We have experimentally studied the property of multiwavelength erbium-doped fiber laser based on Moire gratings. The Moire gratings are fabricated by utilizing the phase mask and ultra violet exposure technique. The two gratings have four and six transmission valleys, respectively. By using these gratings as wavelength-selective components and output coupler in a linear cavity erbium-doped fiber laser, four and six output lasers are obtained. The minimum wavelength spacing is 0.5nm.2. Experimental study on the output characteristics of erbium-doped fiber laser:1) Tunable ring cavity erbium-doped fiber laser is achieved with an optical filter. We have studied the effect of coupling ratio on output laser power, according to

Related Dissertations

  1. Study of Interaction between Epoxy Molecules and Carbon Fiber Surface with Molecular Simulation,TB332
  2. Design and Study on Movable Packing Machine in Acrylic Fiber Production Lines,TH248
  3. Research on Photo-Electric System of Rotating Shaft Radial Runout and Rotary Speed Real-Time Measurement,TH822
  4. Research on Gyro Stabilized and Tracking Platform,V241.5
  5. Realization of Fiber Optic Gyroscope Signal Processing Circuits Based on FPGA,V241.5
  6. Temperature Drift Modeling and Compensation of Fiber-Optic Gyroscopes,V241.5
  7. Research on Control System and Head of 7-Axis NC Fiber Placement Machine,TG659
  8. Effects of Enzyme/Chemical Agents on Refining of Plant Fiber,TS713
  9. Preparation and Properties of Highly Active Dietary Fiber and Carboxymethylcellulose from Gracilaria Residue,TS254.9
  10. The Environmental-Friendly Method and Process of Removing Non-Cellulosic Matters from Bamboo for Textile Fiber,TS652
  11. Study on the Mechanical Properties of Pva-high Toughness Cementitious Composites,TU528
  12. Preparationandapplication of Pan-Based Amphoteric Ion Exchange Fiber,TQ342.31
  13. Reaserch on the Effect of Fabric Structure on the Performance of Seamless Sports Underwear,TS941.15
  14. Phosphoproteomics Studies on Cotton (Gossypium Hirsutum) Fiber Initiation Development,S562
  15. Research on Detecting Optical Fiber Geometric Parameter Based on Machine Vision,TN253
  16. Expressive Characterization of Transcription Factors in Cotton Fibre Initiation and Cloning and Characterization of Three Transcription Factor Genes in Gossypium Hirsutum L.,Q943
  17. Research on Identification System of Cashmere and Wool Fiber,TS101.921
  18. Study on Monitoring and Early Warning for Heavy Metal in Textiles,TS107
  19. Effect on Yield and Quality of Cotton with Soil Waterloged and the Physiological Basis,S562
  20. Preliminary Function Analysis of Two Annexins in Cotton (Gossypium Hirsutum L.),S562
  21. The Molecular Evolution Analysis of Genes Related with Cotton Fiber Development in Different Cotton Species in Gossypium,S562

CLC: > Industrial Technology > Radio electronics, telecommunications technology > Photonics technology,laser technology > Laser technology, the maser > Laser
© 2012 www.DissertationTopic.Net  Mobile