Dissertation > Excellent graduate degree dissertation topics show

Study on Contact Fatigue Life Based on Grease Variation with Temperature

Author: LiZhen
Tutor: SongBaoYu
School: Harbin Institute of Technology
Course: Mechanical Design and Theory
Keywords: rolling contact fatigue temperature field lubricating grease friction moment
CLC: TH117.22
Type: Master's thesis
Year: 2008
Downloads: 132
Quote: 0
Read: Download Dissertation

Abstract


Bearing is widely applied in aviation, astronautics, machinery and national defense. The performance of machinery equipment is directly affected by bearing’s life. Rolling contact fatigue is one of the main inactivation types of bearing. Research and improvement of lubricating property of grease are important ways to increase the bearing service life and reliability. With the development of modern industry , bearing always works at variable temperature environment. So, it both have theoretical significance and practical value to research the variation of contact fatigue life which is caused by lubricating property of grease at different temperatures.In this paper 3# general purpose lithium lubricating grease is selected as experimental grease., and the temperature of contact zone is measured respectively under different ambient temperature with improved experimental bench. And then the heat generation rate caused by friction and boundary condition are figured out. Simulation results of contact zone’s temperature have also been calculated in ANSYS software. Comparing the measurement results with simulation results, operating temperature of lubricating grease is got.Using Weibull slope k, rated life L10, and median life L50 as evaluating indicator, results of contact fatigue experiment indicate that contact fatigue life decreases with the increment of temperature. Within the bounds of experimental temperature, contact fatigue life reflects grease’s lubricating property directly. Research results show that evaporated quantity of base oil increases with temperature rise, and lose more base oil at high temperature. At the same time, viscosity will decrease drastically that causes much sum of grease bleeding and declining bearing capacity of oil films. Besides, strength limit of lubricating grease decreases with the increase of temperature as well, which gives an edge to amount of grease bleeding and weakens adhesive ability of lubricating grease. The integrated effects of these factors deteriorate the lubricating property of lubricating grease. It is identical with the result of contact fatigue experiment.

Related Dissertations

  1. Simulation Analysis on Temperature Stress of RCC Arch Dam and Its Construction Joints Design Research,TV642.2
  2. Analysis and Study of Abutment Stability in Concrete High Arch Dam by Three-Dimensional Nonlinear Finite Element Method,TV642.4
  3. Finite Element Analysis of Longitudinal Welding Temperature and Stress Fields for Sa580-Ⅲ Steel Thick Wall Cylinder,TG404
  4. Calculation on Temperature Field of Permanent Magnet Linear Synchronous Motor,TM341
  5. The Study of Cable’s Temperature Monitoring Systm Using Distributed Fiber Bragg Grating Based on ARM,TM247
  6. Coupled Thermal and Mechanical Load Analysis in Diesel Engine Piston,TK423
  7. The Detection and Operation of 3D Temperature Field Visualization on W Shape Boiler,TK227
  8. Of energy - saving heat damper valve plate of the micro- water temperature and thermal stress field finite element analysis,TK175
  9. Temperature Control and Crack Prevention of Mass Concrete for Foundation of High-rise Building,TU755
  10. Simulated Study of Temperature Control and Anticracking in Mass Concrete Pile Cap,U445.57
  11. Numerical Simulation of Temperature and Stress and Strain Fields in Laser Multilaye Welding of Mid-Thick Plate,TG456.7
  12. The Study of Sound Wave Propagation Characteristics Under the Influence of Wind and Temperature Field in the Air,O422
  13. Numerical Simulation of Temperature Field for the In-situ Upgrading of Oil Shale,P618.12
  14. The Design Optimization of Intrinsically Safe Electromagnets,TM574
  15. Research on Thermal Calculation of Permanent-Magnet Machines,TM351
  16. Fluid Field Analysis and Temperature Calculation of HSPM Machine,TM351
  17. Voltage Transformer Insulation Reliability Analysis and Design,TM451
  18. Numerical Research on Mixing Characteristic of R0110 Heavy Gas Turbine Combustor,TK471
  19. Numerical Investigation on Compound Angle Film Cooling of Turbine Blade,TK473
  20. Research of Acoustic Temperature Field Measurement System and Acoustic Travel-time Measurement Method,TK311

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanics (mechanical design of the basic theory ) > Mechanical friction, wear and lubrication > Lubricating > Lubricant
© 2012 www.DissertationTopic.Net  Mobile