Dissertation > Excellent graduate degree dissertation topics show

The Study of the Hydraulic Excavator Work Elements Based on the Virtual Prototype Technology

Author: YangWuCheng
Tutor: GuoWei
School: Xi'an University of Science and Technology
Course: Mechanical Manufacturing and Automation
Keywords: The Hydraulic Excavator Work Elements Virtual Prototype Pro/ENGINEER ADAMS Kinematics simulation Dynamic simulation
CLC: TU621
Type: Master's thesis
Year: 2006
Downloads: 862
Quote: 14
Read: Download Dissertation


The hydraulic Excavator is a kind of important construction machinery. Owing to the more and more completed market, using the new method to research a high performance and reliability hydraulic excavator is significant. But in our country, because of the old designing method, high cost resulting new product research & development period. So the homemade excavator has no advantage in market competition compare with oversea excavator. Now along with the technical of virtual prototype gradual maturity, we could use it in designing excavator and the questions above mentioned can be solved easily.This paper elaborated about the technical of virtual prototype research condition, trended about domestic and oversea technology, and gave the necessary significance to use the technical of virtual prototype in designing hydraulic excavator. Based on the study of movement about hydraulic excavator’s working equipment, according to drawing of the trial-produce, the study set up the 3D (Three Dimensional) model about a homemade 220 Hydraulic Excavator Working Equipment, in the end found an excavator virtual prototype using the Pro/E software. The paper also gave a method on how to use the 3D model to imitate the dynamic simulation, to analyse the kinematics of working equipment, check interfering and validate the validity of excavator virtual prototype.Through the MECH/PRO module, this paper set up the 3D model system and used the analysis software ADAMS to analyze the movement of the excavator working equipment. After this, author obtains the main dimensions and the drawing of working range about the excavator, and validates the validity of working cycle time etc. According to the analysis of the resistance of the bucket’s tooth, this paper gave the analysis dynamics of the whole excavator and calculated all forces of each joint and provided parameter for analysis of the structure characteristic.

Related Dissertations

  1. Design of Reciprocatingwire Outfit of Mwedmand Research on It’s Control System,TG484
  2. The Study of Dynamic Simulation of the Passive Dynamic Quasi-Quarupedal Walker,TP242.6
  3. Broken walnut shell force testing and virtual prototype design of the main components of walnut sheller,S226.4
  4. Prediction and Simulation of Air Quality of Coal Mining Area Based on VGIS System,X831
  5. Analysis for the High-pressure Gas System in Guangzhou,TU996
  6. Vibration Isolation Design of Powertrain Mounting System of a Commercial Vehicle,U463.33
  7. The Structure Design of 2000kN Servo Press for Hot Forming,TG385
  8. Simulation and Experimental Study on Performance Characteristic of Engine Valve Train,TK403
  9. Dynamic Analysis and Simulation for Crane Ship of Transporting and Lifting Girders,U674.35
  10. Development on Shape-adaptive Polishing Robot for Large Free-form Surface,TP242
  11. The Structural Design and Experimental Research on Kilometer Pitch Carbon Fiber Roll-up System,TQ342.742
  12. Hydraulic Pressure Vibrator of Railway Maintenance’ Virtual Prototyping Design Analysis and Simulation,U216.67
  13. The Finite Element Analysis of Wheel Hub Essential Spot of Axial-Fiow Rotor,TP391.72
  14. Virtual Prototype Design and Performance Analysis of a Novel Three Rotational Parallel Mechanism,TP391.9
  15. Investigation on Active Power Vibration Eliminator,TB535.1
  16. The Mechanism of Seeding about Mechanical Precision Clamp-type Cotton Seed Metering Device & Computer Simulation Analysis,S223.2
  17. Design and Study on Minor-Caliber Deep Well Rescue Robot,TP242
  18. Collaborative Modeling and Simulation Analysis of Hydraulic Support Virtual Prototype,TP391.7
  19. Research on Interaction Mechanism of Organization Innovation and Technology Innovation Based on Evolutionary Theory,F272.92
  20. Dynamic Simulation on the Spatio-temporal Patterns of Land Use Change in Hadaqi Industrial Corridor,F427
  21. Computer Simulation about Fire Smoke Flowing and Study on People Evacuation of Hospital Sickroom,X932

CLC: > Industrial Technology > Building Science > Construction machinery and equipment > Earthwork machinery, mining machinery > Excavator
© 2012 www.DissertationTopic.Net  Mobile