Dissertation > Excellent graduate degree dissertation topics show

Cu ion implantation Antibacterial Properties of A304 stainless steel

Author: GaoXiaoJin
Tutor: ChenJingChao
School: Kunming University of Science and Technology
Course: Materials Science
Keywords: ion implantation antibacterial stainless steel molecular dynamic saturated implanting dose adsorption
CLC: TG142.71
Type: Master's thesis
Year: 2009
Downloads: 39
Quote: 0
Read: Download Dissertation


Recently, people pay more attention to the product which have the quality of antibacterial. So, the demand for antibacterial stainless steel increase quickly. The antibacterial stainless steel is a kind of material which added in some metal element in stainless steel, and after heat-treatment, the element(usually Ag, Cu) show a special phase and the phase distributed evenly in the surface and body.The method of ion implanting have been used widely, for the antibacterial stainless steel, the ion implanting make the element distributed evenly, at the same time, the method can’t change the structure of matrix which influence the property of stainless steel. However, if ion implanting can get antibacterial effect and phase, if the mechanism of antibacterial is different from element body addition. Therefore, in this paper, we discuss the influence and mechanism of the ion implanting stainless steel.In this paper, the saturated implanting dose of Cu were discussed, and through the calculation of it, the different implanting dose were done on the surface of stainless steel, the exeperiment result show:the saturated implanting dose is 5.81×1017 (ion/cm2), and the SEM、GXRD give the precipitation isε-Cu and the size, distribution of it is a important factor for antibacterial, the heat-treatment process is 500℃for 4 h in the atmosphere H2Cu ions were implanted to A304 stainless steel by MEWA ion source. Through heat treatment, the sample were detected by XPS and antibacterial test. The experimental result show:the sample has a high antibacterial rate:97.6% for Escherichia Coli and 99.1% for Staphylococcus aureu The different value state Cu ion and O. occurred in surface layer through heat-treatment. The antibacterial mechanism is that Cu dispersed in precipitation phases absorb Oxygen in bacterial.The implantation process were simulated through molecular dynamic soft. The model were conduct by Lennard-Jones and Morse potential function. The simulation result show that: during implant process, the Cu ions were implanted to stainless steel by means of replacement and interval position, the iron in surface have lattice damaged therefore in a amorphous condition, In the diffuse model have the precipitation phase of Cu.

Related Dissertations

  1. Preparation of Based on the Phenolic Resin of Activated Carbon and Adsorption-Photopcatalytical Character of Supported TiO2,TQ424.19
  2. Study on the Syntheses and Antibacterial Acticity of Metal Organic Complexes Built from Three Carboxylate Ligands,O621.13
  3. Study on Phylogenetic Diversity and Bioactivity of Symbiotic Fungi of Coral,R284
  4. Under microaerobic conditions closed calcium carbide furnace exhaust COS gas adsorption purification,X781
  5. Properties and Application Research of Multi-Antibacterial Polyamide Fibers,TQ342.1
  6. Preparation of Activated Carbon from Tobacco Stems and Application for Low Concentration Phosphine Adsorption,X712
  7. Prokaryotic Expression and Purification of Human Beta-Defensin-9,Q78
  8. Study of Isolation and Identification on Antimicrobial Substances Produced by Lactobacillus Acidophilus NX2-6,TS201.3
  9. Some Pharmacology and Toxicity of Three Prescriptions from Chinese Veterinary Pharmacopoeia,S859.5
  10. Study on the Enrichment of Antimicrobial Peptides and Purification Technology in Wheat Germ,TQ936.16
  11. Development of Functional Automotive Interior Textiles,TS106.6
  12. Adsortions of Dye by Modified Activated Carbon and Heavy Metals by Rice Husk-Based Activated Carbon,X703
  13. Treatment of Effluent Water from Bio-flocculation Adsorption Technology by Biological Aerated Filter (BAF),X703
  14. Environmental Effects of Poisonous and Harmful Substances in the Typical Industrial Solid Wastes,X705
  15. Biocompatibility Modification of Solid Materials Via Living Free Radical Polymerization,O631.3
  16. Stainless Steel Bright Annealing Furnace with Waste Heat Recovery Energy-saving Technology Research,TG155.1
  17. Several Ladles Pouring Together for Large Super-low-carbon Stainless Steel Casting,TG260
  18. Failure Analysis on Superheat Section Connecting Pipe Flange of Ethylene Cracking Furnace,TQ221.211
  19. Study on the Dry Cutting Performance of Austenitic Stainless Steel 0Cr18Ni9,TG142.71
  20. Research on Precision Laser Cutting of Open CNC System,TG485
  21. Breeding of the High Temperature Resistant High Production Lactobacillus Rhamnosus and Study of the New Lactic Acid Fermentation Technology,TQ921.3

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallic materials > Steel > Special performance of steels > Stainless steel, acid-resistant steel
© 2012 www.DissertationTopic.Net  Mobile