Dissertation > Excellent graduate degree dissertation topics show

Study on the Properties of Waterborne Polyurethane Systems and Their Application

Author: ChenWeiTao
Tutor: LiShuCai
School: Tianjin University of Science and Technology
Course: Materials Processing Engineering
Keywords: cationic waterborne polyurethane anionic waterborne polyurethane microphase separation adhesive strength heparinization thromboresistance
CLC: O633.14
Type: Master's thesis
Year: 2005
Downloads: 723
Quote: 3
Read: Download Dissertation

Abstract


In this research, the aliphatic waterborne polyurethane were prepared from isophorone dissocyanate(IPDI), polyester and polyether polyol. It consists of two main parts:(1) the study on cationic waterborne polyurethane;(2) the study on anionic waterborne polyurethane.Cationic and heparinized waterborne polyurethanes were synthesized using N-methyldiethanol amine as the chain-extender. The effects of solid content on viscosity and particle size of emulsion were studied in the first time. The higher the solid content, the bigger the particle diameter and the lower viscosity of emulsion. The effects of the amount of MDEA and the ration of NCO/OH on the particle size, the viscosity of the emulsion, the water-resistance, the tensile strength and the adhesive strength of the ACPU were discussed. It was found that with the increase of the MDEA content, the viscosity of the emulsion and the adhesive strength increased, the particle size decreased, the tensile strength increased;with the increase of the NCO/OH ratio, the viscosity decreased, the particle size and the adhesive strength increased, the tensile strength increased. In addition, we also analyzed the rheology properties of the emulsion with different MDEA content and NCO/OH ratio. The structure of cationic waterborne polyurethane and the structure changes of polymer after heparinization were characterized with infrared spectroscopy. It was showed that the heparinized PU was of excellent antithromboresistance.In anionic waterborne polyurethane system, the effects of the crosslinking agent content on medium-resistance properties of emulsion and mechanical properties of the film were studied. The results indicated the properties of anionic waterborne polyurethane would improved with proper TMP contents. At the same time, the influence factors on microphase separation of waterborne polyurethane were studied by FTIR and DSC, including soft segment type, DMPA and chain-extender contents, different NCO/OH ratio. The results indicated that the microphase separation degree of polyether-type waterborne polyurethanes was higher than polyester-type waterborne polyurethanes. The increase of DMPA amount was related with a lower glass transition temperature, which resulted in higher level microphase separation. The level of microphase separation increased with the increasing of the NCO/OH ratio and chain-extender contents. In the end, we also discussed that the influence factors on adhesive strength of waterbornepolyurethane, including DMPA, TMP and chain-extender contents and different NCO/OH ratio. The results indicated that all the factors increasing the hard-segment contents could benefit to the improving of adhesive strength.*

Related Dissertations

  1. The Synthesis and Properties Research of High Hydrophilic Polyurethane,TQ323.8
  2. Synthesis, Structure and Properties of Pui,TQ334.1
  3. The Preparation and Properties of Oxidized Starch and Its Adhesive,TQ430.6
  4. Surface Electrochemical Modification of WC-6%CO Substrate for Deposition of Diamond Films by CVD,TG662
  5. Research of Repairing Rabbit Knee Joint Cartilage Defect by Heparinized Collagen/Chitosan Scaffolds Binding with TGF-β1 and Adipose-derived Stem Cells,R318.08
  6. Study on Preparation, Characterization and Crystallization Behavior of Polymer Nanoblends,TB33
  7. Research on SRIM Process and Properties of the Parts Prepared by SRIM Process,TQ320.662
  8. Polypropylene thermoplastic elastomer of the micro phase separation,TQ334.2
  9. Effects of "Click" Groups on Surface/Interface,O631.3
  10. Study of Protein Adsorption Behavior on Materals Surfaces Based on Quartz Crystal Microbalance Technology,R318.08
  11. Dissipative Particle Dynamics Study of Microstructures of Complex Block Copolymer Systems,O631.3
  12. A Statistical Theory of Viscoelasticity and Its Application for Styrene-Diene Block Copolymers-Thermoplastic Elastomers Dissertation,TQ334
  13. Design and Study on Antifouling Coatings with Microphase-Separated Structure,U672.72
  14. Microphase Separation Behavior and Properties of PDMS-MDI-PEG Multiblock Copolymer Coatings,O631
  15. Monte Carlo Simulations and Experimental Observations of Soft Matter Composed of Chain-like Molecules,O631
  16. Investigation of Mechanism and Affecting Factors for Bond Strength between Resin and Dentin,R783
  17. The Research on Diamond Films Deposited by Hot Filament Chemical Vapor Deposition,TG174
  18. Research on the Relationship between Properties and Structure of High Performance Castable Polyurethane Elastomer for Dynamic Loading Application,TQ334.1
  19. Synthesis and Properties of Dual-Cure Polyurethane Acrylate,O633.14
  20. Studies on the Synthesis and Protein Adsorption Tests of Biomedical Polyurethane Surfaces,O633.14
  21. Synthesis and Properties of Modification Polyurethane with Ionic Liquid,O633.14
  22. Studies on the Interpenetrating Polymer Networks Based on Polyurethane,O633.14

CLC: > Mathematical sciences and chemical > Chemistry > Polymer chemistry ( polymer ) > Miscellaneous Chain Polymers > Oxygenated the polymer chain > Polyester
© 2012 www.DissertationTopic.Net  Mobile