Dissertation > Excellent graduate degree dissertation topics show

Hydrophilic Modification of Polypropylene Membrane by Maleic Anhydride Plasma Polymerization

Author: WangWei
Tutor: HuangJian
School: Nanjing University of Technology
Course: Materials Science
Keywords: Plasma Polymerization Maleic Anhydride Porous Polypropylene Membrane Contact Angle Hydrophilic Modification
CLC: TQ320.721
Type: Master's thesis
Year: 2005
Downloads: 168
Quote: 0
Read: Download Dissertation

Abstract


Maleic anhydride is of particular interest for the synthesis of functional organic thin films because of the double bond and the reactive anhydride group. It can participate in a variety of chemical reactions occurring at the double bond by photochemical reactions, conventional polymerization, copolymerization, and graft polymerization. In this paper, a hydrophilic membrane was prepared by depositing maleic anhydride into a polypropylene microporous membrane by plasma technique, and the morphology of the deposited membranes was characterized. Different hydrolyzed conditions’ effect on surface structure of membrane was investigated. Static contact angle of pure water on membrane was used to investigate the hydrophilicity of the deposited membrane and the relationship between the hydrophilicity and time. The flux of deposited membrane was tested.Firstly, maleic anhydride deposited polypropylene microporous membranes were prepared by low-temperature plasma polymerization with polypropylene membrane as a substrate. The structure and morphology of the deposited membranes were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analysis. The results of FT-IR analysis indicated that anhydride structure was not prone to be destroyed and a significantly higher relative amount of anhydride groups was enhanced with the increase of treating time in low treating power 10W. With the increase of treating power, the structure of anhydride was trend to be destroyed and formed higher relative carboxylic acid structure. The result of SEM analysis showed that there existed etching and polymerization phenomenon on the surface of membrane by maleic anhydride plasma polymerization. At low treating power, even though the treating time was increased, maleic anhydride film could be also formed on the surface of polypropylene membrane. which considered that maleic anhydride plasma polymerization mainly occurred on the surface of membrane. When the

Related Dissertations

  1. Synthesis and Characterization of High-performance Polyacrylonitrile,O631.3
  2. Hydrophilic structure of different types of surface -modified polyurethane material and coagulation 12 factor nine peptide fragments,and fibrinogen P1 fragment of computer simulation of the interaction,O631.3
  3. Preparations and Characterizations of Nanoporous Adsorption Materials and Their Application in Cyanobacteria Control,X52
  4. RPE/Sand Powder Blends and the Study on Its Compatibilization,TQ320.1
  5. Growth Mechanism of Mono-Disperse Microspheres of Poly(Styrene-Co-Maleic Anhydride) in Self-Stabie Precipitation Polymerization,TQ316.3
  6. Study on Self-Stable Precipitation Polymerization of Maleic Anhydride and A-Methyl Styrene and Reinitiation of Copolymer,TQ316.334
  7. Synthesis of High Molecular Weight Poly (Styrene-Co-Maleic Anhydride) and Copolymers Including Maleic Anhydride Microspheres by Precipitation Polymerization,O631.3
  8. Effect of Particles on the Stability of the Crude Oil Emulsions,TE39
  9. Polar interface modification of surface properties,O647.1
  10. Researches about the Wettability on Copper and Aluminum Surfaces,TG174.4
  11. Polystyrene-matrix Micro-and Nano-composites Modified by MA-g-SEBS,TQ320.1
  12. Study on Preparation of Hyaluronic Acid-like Chitosan,R94
  13. Study on Water and Oil Repellent Finishing of Polysulfonamide Fabric,TS195
  14. Design and Fabrication of Bionic Periodic Microstructured Surfaces and Study on Their Wettability,TB302.4
  15. Preparation and Characterization of Organic-inorganic Hybrid Hydrophilic Coating,TB302.4
  16. The dry ice particles jet cleaning method,TB490
  17. Influence of Nanostructure on Hydrophobic Properties at TiO2 Surface Studied by Molecular Dynamics Simulation,O614.411
  18. Fundamental Research on A Pit and Fissure Sealant Incorporating A Quaternary Ammonium Monomer,R781.1
  19. The Research of Oil-stone Interface Adhesive Based on Modified Surface of Asphalt and Stone,U414
  20. Fabrication and Study of New Type Hydrophilic Coronary Stent,R541.4

CLC: > Industrial Technology > Chemical Industry > Synthetic resins and plastics industry > General issues > Products and testing > Various shapes of products > Film
© 2012 www.DissertationTopic.Net  Mobile