Dissertation > Excellent graduate degree dissertation topics show

Study on Abrasive Belt Grinding Mechanism for Turbine Blade Material

Author: XueXiaoFei
Tutor: YuanSuoXian
School: Northeastern University
Course: Mechanical Manufacturing and Automation
Keywords: coated abrasive belt grinding turbine blades grinding force roughness
CLC: TG580.6
Type: Master's thesis
Year: 2008
Downloads: 52
Quote: 2
Read: Download Dissertation

Abstract


Blades are the key parts of the gas turbine. The material used for making blades has many temperature excellent performances such as high intensity, corrosion resistance and resistant. In the 1930’s, many countries began to use the stainless steel with to manufacture gas turbine blades, however, with the development of manufacturing technology, more and more manufacturers began to use sclerotic marten stainless steel as the material of gas turbine blades. Titanium alloy was used to made blades if there were some special requirements. Coated abrasive belt grinding, as an important branch of grinding technology, has many excellent performances, like high efficiency, little vibration and low temperature, and it is widely used in the grinding, lapping and polishing of many kinds of metal and nonmetal material.(1)The paper take the 2Cr13 typical blades material as research object, thoroughly developed the performance of coated abrasive belt grinding of difficult grinded the material such as 2Cr13.Firstly, the domestic and foreign research actualities were collected and concluded. The grind ability of some typical material was analyzed in this thesis. On the basis of our former research, the abrasive belt grinding process was studied after designing the belt-grinding device and coolant system. Considering the machining requirements of gas turbine blades surface, some main evaluating indicators of abrasive belt grind ability were brought forward.Secondly, the experiments of 2Cr13 typical material were finished, record the grinding force and shear force during grinding with the aid of dynamometer, and studied the relationships between them and grinding parameters.At last, analyzed the surface roughness with the aid of the rough meter and studied the relationships of surface roughness, belt wear and grinding parameters, species of abrasive with the orthogonal experiment and the single factor experiment method.(2)Do some research and analysis of the relevant Belt Grinder leaves parameters, So that we get the abrasive belt grinding machine of freedom degree, the equation of motion parameters and working space.

Related Dissertations

  1. Simulation and Experimental Study on the Scattering Properties of Two Dimensional Rough Surfaces,TP391.41
  2. The Effect of Different Microwave Polymerizations on Accuracy and Physical Properties of Denture Base Resin,R783.6
  3. Comparison of the Physical and Mechanical Properties Among Four Kinds of Die Stone Casts,TQ177.3
  4. Effect of the Rubbing and Wearing Behavior of Steel Rail by Ultrasonic Peening,TG115.58
  5. Research on Key Technologies of Three-dimensional Surface Roughness Measurement,TG84
  6. Effect and Mechanism of Micro Polluted Raw Water Treatment by Ultrafiltration,X703
  7. Research on Macro-quality of Stainless Steel Parts by Selective Laser Melting,TG665
  8. Simulation Study on Formation Mechanism and Wheel Wear of Superhigh-point Grinding,TG596
  9. Investigation of Microstructure and Oxidation Resistance of the (Ti,Al)N/TiN Coatings on the Ultra Supercritical Steam Turbine Blades,TG174.44
  10. Research on Ultrasonic Wave Anti-Icing and De-Icing Theory and Technology for Wind Turbine Blades,TK83
  11. Technology for Measurement of Blade Tip Clearance in the Gas Turbine,TK477
  12. Rapid Molding and Cutter Path Planning of Turbine Blades,TK263.3
  13. Experimental Study on Gas Flow in Micro-channels,TK124
  14. Diamond Grinding of Microstructured Surface,TG580.619.3
  15. A Study of AZO Deposited on Different Substrates and Affect of Buffer Layers with Different Thicknesseses,TM914.42
  16. Analysis of Velocity and Experiments for Mircofluid Flow Induced by Alte Current Electroosmosis,O361.4
  17. Research on Process Parameters Decision & Optimization for Function Ceramics in the Precision CMP,TG580.692
  18. Experimental Study on Convective Heat Transefr of Filling Flow in Micro Injection Molding,TK124
  19. Influence of Tooth Face Roughness on Gearing Contact Fatigue Stress,TH132.41
  20. The In-process and Real-time Checking Technology of Free-form Surface Processing Quality,TG84

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > Grinding and grinding machine > General issues > Grinding process
© 2012 www.DissertationTopic.Net  Mobile