Dissertation > Excellent graduate degree dissertation topics show

Research on Hydrothermal Synthesis of One-Dimension PZT and Its Growth Mechanism

Author: TianQiuHui
Tutor: WangWen
School: Harbin Institute of Technology
Course: Materials Science
Keywords: hydrothermal method PZT one-dimension structure surfactant
CLC: TB383.3
Type: Master's thesis
Year: 2010
Downloads: 64
Quote: 0
Read: Download Dissertation

Abstract


PZT one-dimension structure was successfully synthesized by using ZrOCl2·8H2O/Zr(NO34·5H2O/ZrO(No32·2H2O, Pb(NO32/Pb(CH3COOH)2 and Ti(C4H9O)4 as raw materials, ammonia as precipitator, KOH as minerizer and CTAB/PVA 1750 as surfactant in hydrothermal system. XRD, RAMAN, SEM and TEM were used to characterize phase composition and microstructure of the products .By adding CTAB, we concluded that the proper concentration of CTAB to produce PZT one-dimension structure was 5g/L. The morphology was nanorods with 500nm in width and 8μm in length. As the reation time increased from 12h to 48h, the amount of PZT one-dimension structure was getting more. We proposed that the crystal growth and morphology evolution was governed by dissolution-precipitation process. The value of pH producing Zr-Ti precipitation was chosen as 9.5, 10, 10.5 and 11 to investigate the influence on the mophorlogy of powders. It showed that as the the value of pH increased from 9.5 to 11, ratio of length/width increased from 2 to 8. The growth tropism of single nanorod was along [001] characterized by TEM. According to the experiments, the mechanism that CTAB works on PZT one-dimension structure was studied and a model was set up to explain the mechanism.By adding PVA 1750, we concluded that as the concentration of PVA 1750 got higher, the trend of producing PZT one-dimension got more obvious, and the ratio of length/width got higher. As the concentration of PVA 1750 rose to 16g/L, the morphology of PZT was nanorods with 300nm in width and 2.5μm in length. We also concluded that the Zr-Ti precipitation and the production cleaned by centrifugation would be prior to produce PZT one-dimension strcture. The effects of reaction time and the value of PH producing Zr-Ti precipitation on the morphology of powders was the same as adding CTAB. It indicated that the concentration of KOH played an important role on the morpgology of powders. When the concentration of KOH was lower (1.48mol/L), the morphology was furcate, while the concentration of KOH was higher (2mol/L), the morphology was radiate nanorods surrounding a sphere. The growth tropism of single nanorod was along [001] characterized by TEM. According to the experiments, the mechanism that PVA 1750 works on PZT one-dimension structure was studied and a model was set up to explain the mechanism.

Related Dissertations

  1. Application of Additives’ Drag Reducing Technology in District Heating System,TU995
  2. Study of Tin Alloy Carbon Composite Used for Lithium Ion Battery,TM912.9
  3. Effectiveness Comparison of Different Solvents in Organochlorine Pesticide (OCP)-Contaminated Soil Flushing and Optimization of Flushing Parameters,X592
  4. Studies on the Isolation of Oil-Degrading Bacteria with Biosurfactant Production and Their Characteristics,X172
  5. Adsortions of Dye by Modified Activated Carbon and Heavy Metals by Rice Husk-Based Activated Carbon,X703
  6. Determination of Organophosphorus Pesticides Residues by Fluorescence Method and Its Application,O657.39
  7. Experimental Study of Wettability of Coal and New Wetting Agent,TD714
  8. Activition of Surfactant Protein A and D in Aspergillus Fumigatus-Induced Innate Immune Responses in Human Cornea Epithelial Cells,R772.21
  9. The Preparation of Modified Siloxane Surfactant and Its Application in Emulsifying Silicone Oil,TQ423
  10. Synthesis and Properties of Functional Waterborne Polyurethane Coatings,TQ633
  11. Pesearch of Manufacuture and Application of Environmental Friendly Detergents,TQ649.5
  12. The Effects of Three Mechanical Ventilation Strategies on Inflammatory Factors and Type Ⅱ Alveolar Epithelium Cell Morphology in Newborn Piglets with Acute Lung Injury,R563.8
  13. Research and Application of Precision Feeding Table Control System Based on Embedded Processor,TG580.23
  14. Synthesis, Properties and Application of Gemini Cationic Surfactants with Amide Group,TQ423.12
  15. A Study on Ni-P-BN(h) Electroless Composite Coatings,TQ153.1
  16. Preparation, Doping and Gas-Sensing Properties of Indium Oxides,O614.372
  17. Determination of Organo Phosphorus Pesticides Total-residues by Fluorescence Spectrometry and Its Alalytical Application,O657.39
  18. The Interfacial Property of Surfactant,O647.2
  19. Volatile organic compounds and vapor-liquid equilibrium relationship between the surfactant solution,O647.1
  20. Different crystal form of calcium sulphate crystal growth studies,O614.231
  21. Research on Ultrasonic Driver with Four Driving Feet Using Longitudinal Compound Transducer,TM359.9

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Special structural materials
© 2012 www.DissertationTopic.Net  Mobile