Dissertation > Excellent graduate degree dissertation topics show

Study on Polishing Technology of Engineering Ceramics Ultra-precise Plate

Author: ZhaoMingLi
Tutor: ZhaoBo
School: Henan Polytechnic University
Course: Mechanical Manufacturing and Automation
Keywords: Engineering Ceramics Ultrasonic vibration Abrasive track Roughness Microscopic quality
CLC: TQ174.6
Type: Master's thesis
Year: 2007
Downloads: 21
Quote: 1
Read: Download Dissertation


With excellent characteristics of high strength, high hardness , high wear resistance and high temperature engineering ceramics , metal and composite materials are known as the three pillars of modern engineering materials , but because of the difficult processing characteristics of ceramic materials , to a large extent on limiting the promotion and application of ceramic materials in high-tech fields . Characteristics of engineering ceramic materials and ultrasonic ultrasound used in precision machining of engineering ceramics . According to the local resonance theory , design and production of the acoustic system suitable for of dimensional ultrasound polishing flat , and tooling vibration performance test ; application indentation fracture mechanics theory , studied hard and brittle material removal mechanism and under different processing conditions , the relative trajectory of the particle motion of the specimen as well as single grain analysis simulation, found that when ultrasound is applied in the y direction , its trajectory is different from the ordinary polishing and single grain rectilinear trajectory , but have a certain amplitude of the sinusoidal curve described dimensional ultrasonic vibration polishing abrasive scratches wider than normal when polishing abrasive scratches , thus proving the efficiency of the polishing of the two-dimensional ultrasound mechanism ; through engineering ceramic polishing force pilot study found that the ultrasonic vibration polishing force is less than ordinary polishing force under the same processing conditions ; analyze the impact of different processing parameters on surface roughness by comparing the surface roughness after polishing by orthogonal test and multiple linear regression analysis to study the parameters of polishing a significant degree of surface roughness , come to the best polishing parameters , given the surface roughness of the test formula ; electron microscopy experiments revealed grinding and the essential difference polishing , and further illustrates the ultrasonic polishing better than ordinary polishing , ultrasonic polishing scraps of material removal , and surface pits are relatively shallow , relatively large flat surface area . Experimental studies have shown that the ultrasound used in polishing technology , engineering ceramics is an efficient processing method .

Related Dissertations

  1. The Effect of Different Microwave Polymerizations on Accuracy and Physical Properties of Denture Base Resin,R783.6
  2. Comparison of the Physical and Mechanical Properties Among Four Kinds of Die Stone Casts,TQ177.3
  3. Research on Speckle Suppression in Laser Micro-Projector,O436
  4. Research on the Control of Processing Quality When Cutting Nickel-Base Superalloyat High Speed,TG506.1
  5. Studies on the Transient Mixed Lubrication of Involute Gears Considering Thermal Effect,TH117.2
  6. Analysis of the Dynamic Response of the Roughness Asphalt Pavement,U416.217
  7. High-speed machining surface roughness,TG580.6
  8. The Simulated Test of the Wind Erosion & Wind Tunnel on Wind Contour Characteristics Close to Ground Surface at Typical Wind Erosive Region,S157
  9. The Style of HD400/425×20’ Roll Grinder-Based Research the Method of the Quality of Grinding Roller,TG595.4
  10. The Experiment Study of Several Resin-removal Methods on Enamel Surface,R783.5
  11. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  12. The Prediction Model and Experiment Research of Ceramics Surface Roughness,TG580.6
  13. Experimental Study and Theoretical Analysis on the Bending Behavior of the Corroded Channel Steel,TU391
  14. Study on Sediment Movement and Scouring Deformation Scouring Deformation of Central Bar before/after Being Protected,TV142
  15. Study on Water Flow Characteristics in Circular Micro-Tubes,TK124
  16. Polishing Performance and Water Sorption of Six Resin Composites,R783.1
  17. The Study on Testing the Roughness of Fabric Surface by a Mechanical Method,TP391.41
  18. Research on Decision Tree Algorithm Based on Rough Set in the System of Physical Health Examination,TP311.52
  19. Mechanism and Experimental Study on Ultrasonic Vibration Assisted Milling,TG663
  20. The Theoretical Analysis and Experimental Research of Ultrasonic Assisted Gear Honing,TG618.2
  21. Research on Ultra-Precision Diamond Mirror Turning Carbon-Steel by Using Ultrasonic Vibration,TG506

CLC: > Industrial Technology > Chemical Industry > Silicate > Ceramic Industry > Production process and equipment
© 2012 www.DissertationTopic.Net  Mobile