Dissertation > Excellent graduate degree dissertation topics show

The Analysis of Power System Subsynchronous Oscillation Based on the Bond Graph

Author: ChengZuo
Tutor: LiZhiMin
School: Harbin Institute of Technology
Course: Electrical Engineering
Keywords: subsynchronous oscillation shaft torsional oscillation bond graph equivalent circuit
CLC: TM711
Type: Master's thesis
Year: 2010
Downloads: 130
Quote: 0
Read: Download Dissertation

Abstract


With the development of our interactive electric grid in recent year, especially the widely application of the thyristor controlled series compensation (TCSC) and high voltage direct current (HVDC) transmission, the importance and urgency to study the problem of SSO (subsynchronous oscillation) of power system is becoming particularly outstanding. The subsynchronous oscillation of power system is a kind of special phenomenon of electromechanical coupling interaction, that refers to complicated multi-energy system, and the tradition analysis method is less convenience.The bond graph theory is a modeling method suitable for the multi-energy system, and based on the energy conservation,that can transform one kind of energy system model to another equivalent energy system model. That is very convenience to analysis and study in the same energy system, and provide a facilitate tool to the multi-physics system modeling. This paper uses the bond graph theory to analyze the shaft oscillation of the subsynchronous oscillation, that is convenience for analyzing the related issue of the subsynchronous oscillation. Bond graph theory itself has definite topology structure and established the mathematical model of the systematic approach in the multi-energy system has extensive applicabilityThis paper proposes a method which based on the bond graph theory to analyze and simulate the SSO. The bond graph model of turbine generator unit shaft system is established by using this method, and the equivalent circuit model of turbine generator unit shaft system is proposed. It is convenience to analyze the shaft torsional oscillation directly when combines the other electric block to simulate the dynamic process of the SSO.Case studies using the model, which is the IEEE about the first benchmark model for computer simulation of subsynchronouse resonance, and combining the simulation of PSCAD/EMTDC for comparison. That proves the validately and accuracy of the proposed shaft system model based on the bond graph.

Related Dissertations

  1. The Equivalent Circuit Model of Radial Vibration Mode Piezoelectric Transformer and Its Application,TM406
  2. Study on a New Novel Avalanche Photodiode for Suppression of Edge Pre-breakdown,TN364.2
  3. Ship's ballast system simulation software research and design,U664.9
  4. Composite cage rotor induction motor starting performance of the design and research,TM343
  5. Chracteristic Analysis of Dual-drive Planetary Gear Reducer with Large Power of Shield Machine,TH132.46
  6. Based on the development of analytical redundancy relations the HXD2 locomotive Faiveley brake test system,TP274
  7. Research on Miniaturized Folded Waveguide Power Dividers,TN626
  8. Research on Data Acquisition System of Digital Substation and the Protection Theory for Transformer Based on It,TM76;TM63
  9. Modeling and Operating Simulation of Variable Frequency Transformer,TM343
  10. Fault Diagnosis and Maintenance Strategy of Hydraulic System of Concrete Pump,TU646
  11. Hydraulic lifting machine from the Road jobs cylinder Synchronous System,U215.6
  12. The Characteristics Analyses of a Comb Vibratory Mems Resonator,TN751.2
  13. Design and Simulation of Micromachined Silicon Condenser Microphone with Free Floating Diaphragm,TN642
  14. Analysis of the Effects of Electrode on Vibration of Piezoelectric Plate with Dissipation,O327
  15. Theoretical Analysis and Research for Performance of High-pressure and High Water-based and Mass Flow Electro-hydraulic Valve for Powered Support,TD355.4
  16. Study on Damping of SSO Based on Flexible Power Technology,TM761
  17. Study on All Parallel Directly Feeding System with Reinforce Wire,U223.6
  18. Modeling and Application of LTCC Passive Components,TP391.44
  19. Electrochemical Corrosion Characteristic of Direct Current Pulsed Plasma Sourse Nion AISI 304 Stainless Steel,TG156.82
  20. Researches on Modeling and Validation of Ultrasonic Motor,TM359.9
  21. The spur gear transmission Nonlinear Dynamics bond graph modeling,TH132.41

CLC: > Industrial Technology > Electrotechnical > Transmission and distribution engineering, power network and power system > Theory and Analysis > Network analysis,power system analysis
© 2012 www.DissertationTopic.Net  Mobile