Dissertation > Excellent graduate degree dissertation topics show

Study on Dynamic Characteristic of Diesel Engine Main Structure System

Author: LiuJianXiao
Tutor: LiShen
School: Northeastern University
Course: Mechanical Manufacturing and Automation
Keywords: modal analysis FEM combination structure component mode synthesis anisotropic virtual material method modal experiment transient analysis
CLC: TK427
Type: Master's thesis
Year: 2008
Downloads: 111
Quote: 0
Read: Download Dissertation

Abstract


"Convenient to take"-monitoring and fault diagnosis system for military engines is developed by equipment dynamical engineering center of NEU together with a certain Troop, Shenyang Military Command. Based on the engineering research on the structure of 6BT5.9 diesel engine, as a sub-projects, the dynamic analysis is conducted systematically and intensively in the paper, and experimental verification of main parts is also performed. A comparison shows that the theoretical calculation results are quite consistent with those achieved in experiments.Based on the modal analysis theory, the structure and working conditions of the diesel engine is analyzed, international and native research about the dynamic analysis of the diesel engine is studied systematically, and the finite element method(FEM) is applied to the theoretically. By ANSYS software, the finite element models of the diesel engine with engine block, crankshaft and cylinder head are constructed in this paper. This overcomes the difficulty in application of the finite element modeling with plate and shell, and simultaneously calculates and analyzes every free modal parameter of the models.The diesel engine is composed of a lot of the complex components and parts. How to simulate the boundary conditions of combined structure properly, and it is the heated problem of model analysis area. Traditional methods was not in reason when deal with substructure of relative relationship of components. This paper tries to find a new way to simulate boundary conditions of combined structure effectively at the base of former scholar. A method was initially put forward that is to use anisotropic virtual material to simulate the characteristics of combined parts. That is when entering material parameters, different directions have different value, so it can simulate combined stiffness of every direction, and it will also simulate the relative movement relationship of components effectively. The dynamic analysis of the structures are required to describe structural systems accurately in theory, the method is a detachable structure, continuous system has become distributed relate structure in a node Through the hypotheses of the structural material and shape, the simplification of the structural constraints and joints, the theoretical calculation models are established by finite element techniques, for accumulating bias about model structure, order and parameter, are their results reliability? This is required to be verified in experiment. Based on the modal analysis theory, modal testing system is built, and a set of modal parameter identification program is established by Matlab software. Then the modal parameter of engine block, cylinder head and its Combined Structure are obtained.Based on modal correlation theory, the modal correlation analysis is done by the end of this paper. Modal parameters achieved by finite element method coincide with those achieved in experiment, which shows the correctness of the models and adopts the proper research methods. This work establishes a foundation on the dynamic response calculation, the dynamic characteristic analysis of the diesel engine and failure diagnosis of the Diesel Engine step by step.At last, this paper roughly study the transient analysis of the engine block, the theory of transient analysis of engine block is the heated and also the difficult problem of model parameter identification area. It also proposes the new idea to the monitoring and fault diagnosis of diesel engine.

Related Dissertations

  1. Analysis of Flexspline Stress and Tooth Wear in Harmonic Gear Drive,TH132.43
  2. The Effect of Current Density and Electric Field on Ni and Its Alloy Electrodeposition for Copper Crystallizer,TQ153.2
  3. Marine Boiler Superheater Tubes Expansion Port Stress and Strain Analysis,TQ051.5
  4. Finite Element Analysis and Optimization Design of a Tractor Cab,S219.02
  5. Steering Mechanism and Hydraulic System for the Electronic Control Hydraulic Power Steering System of Tractor,S219.02
  6. TWIN BLOCK appliance reconstruction when combined in different stomatognathic muscles and ligaments associated constraint force of impact,R783.5
  7. Undersea robot plow trenching machine design and analysis,TE952
  8. The Surrounding Rock Monitoring and Finite Element Simulation of Subway Tunnel,U455.43
  9. Reliability-based Sensitivity Research on Multi-span Rotor System,TH113
  10. M1 of CRH2-300 Train Finite Element Analysis and Travelling Comfort,U266
  11. The Design and Research of a New Type of Clamping Elements for Roller Guide,TG659
  12. Research on Vibro-acoustic Behavior of a Cabin Model with Floating-raft System,U661.44
  13. Study on the Influence of Various Defects on the Characteristics of Infrared Photonic Crystal Fiber,TN253
  14. Study on Aseismic of Frame Structure with Weakness Story at Bottom Considering Filled-wall Influence,TU352.11
  15. Grooves on the surface of the impact of packaging interfacial thermal resistance,TN605
  16. Parallel six-dimensional shaking table Design and Research,TH762.2
  17. Tipper Lifting Mechanism and the sub-frame structural analysis and optimization,U469.4
  18. Major component characteristics of the web opening degree Kong Houqiang,U661.43
  19. Design and Development of a CAD/FEA Seamless Integration Platform CAFIP,TP391.72
  20. Passive microfluidic channel mixer topology optimization,TH703
  21. The mechanical properties of fiber reinforced concrete research and finite element analysis,TU528.572

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Diesel engine > Run test
© 2012 www.DissertationTopic.Net  Mobile