Dissertation > Excellent graduate degree dissertation topics show

The Research of the Simulation of Car Rear Crash and Side Carsh

Author: GuoYunPeng
Tutor: ZhaoGuangYao
School: Northeastern University
Course: Mechanical and Electronic Engineering
Keywords: passiveness protection mobile barrier rear crash side crash
CLC: U467.14
Type: Master's thesis
Year: 2008
Downloads: 104
Quote: 1
Read: Download Dissertation

Abstract


Nowadays, vehicles are designed to have higher speed and lighter weight. The number of vehicles is also increasing. As a result, traffic accidents and the casualties sharply increase. In order to enhance passivity security of vehicles and decrease the number of casualties, the clash passiveness characteristic and protecting passengers of vehicles structure need be studied in design stage. Although the vehicles crash testing is necessary to appraising vehicles and passiveness protection device, testing expenditure is too expensive and the testing result is not stable for random factor. According to foreign research result, vehicles crash simulation including dummy can accurately forecast not only the clash characteristic of vehicles but also response and injury degree of passengers in clash process.The thesis detailedly states the mimic crash numeric calculation theory—dynamic explicit non-linear finite element method. It includes basic crash equation, FE discretized equation, relative element of the dummy and car crash simulation, time integration algorithms, contact-impact algorithms etc.Computer simulation is one of the most important ways in modern car crash research, there are many kinds of car crash simulation softwares, several kinds of popular crash simulation softwares including LS-DYNA and its pre-processings and post-processings are introduced in this paper, especially functions and characteristics of LS-DYNA are detailed.This paper take a car as an example, The complete finite element models of a passenger car and the occupant restraint system including a 50th percentile Hybrid III dummy and the seatbelt subsystem, were presented. According to the GB20072-2006 and GB20071-2006, the car is crashed by a rigid wall and a mobile barrier at about 50 km / h was successfully simulated and the results include the car’s displacement, velocity, acceleration and the dummy’s injury value, achieved comprehensive and credible appraisement with the crash process and crash performance.According to the simulation of car crash with dummy, raised the conclusions using in car passive security and car crash performance appraisement

Related Dissertations

  1. Intensity Analyses on Side Crash and Study of Mini-car,U467.14
  2. Stringer structure analysis based on the previous mini-car crashworthiness research,U467.14
  3. Research on Operating Coach Rear-end Collision Simulation and Rear-structural Crashworthiness,U467.14
  4. The Simulation Research and Safety Assessment of Operating Coach During Side Impact,U467.14
  5. The Study of Vehicle Frontal Impact Crush and Its Thin-Wall Component Energy Absorption,U467.14
  6. Simulation and Analysis of the Bumper for the Safety of Pedestrian Leg Impact,U467.14
  7. Study on Frontal Offset Impact Crashworthiness of Car,U467.14
  8. Intensity Analyses on Side Crash and Study of Mini-car,U467.14
  9. A Study on Vehicle Structure Safety and Occupant Injury Protection in Side Impact to a Passenger Car,U467.14
  10. The Research and Analysis on the Positive Crashworthiness of Primary Energy-absorbing Components of Pick-up Body for Frontal Crash,U467.14
  11. Research on Bus Collision and Rolling Simulation Technology,U467.14
  12. Computer Simulation and Experimental Study on the Lateral Crashworthiness of Passenger Car,U467.14
  13. Study on Design Procedures of Frontal Crash Worthiness for Passenger Car,U467.14
  14. The Roll Collision Safety of GL6460L Light Bus,U467.14
  15. Research on Bus Frame Side Crash Simulation and Crashworthiness Analysis,U467.14
  16. Experimental Study for Occupant Restraint System of Box Car,U467.14
  17. Study on the Head Impact Characteristics and Its Test Assessment Method in Car-Pedestrian Impact,U467.14
  18. Computational Simulation and Test Research on the Safety of the Rear Seat Passenger in High-speed Crash,U467.14
  19. Car side impact dummy mechanical analysis and calibration systems development,U467.14
  20. Energy squares of vehicle collision and its application in traffic accident analysis,U467.14

CLC: > Transportation > Road transport > Automotive Engineering > Vehicle test > Vehicle test > Safety, collision and destruction test
© 2012 www.DissertationTopic.Net  Mobile