Dissertation > Excellent graduate degree dissertation topics show

Ningxia Hengli maintenance of equipment control optimization

Author: DiHanZuo
Tutor: ZhouZuo;DiQingFu
School: Northeastern University
Course: Control Engineering
Keywords: Equipment maintenance costs Optimal Control Maintenance and Updates Reliability index Preventive maintenance cycle
Type: Master's thesis
Year: 2008
Downloads: 23
Quote: 0
Read: Download Dissertation


Machinery and equipment in its several years or decades of use, they are always inevitably the wear , decay deteriorate gradually lost its original performance. Then companies must consider is to use new parts to replace the damaged parts , or repair the old parts , so maintenance costs began to happen. A large-scale iron and steel enterprises , a year spent on maintenance of equipment , up to hundreds of millions or ten billion yuan. Industrial Common sense tells us that it takes a lifetime equipment repair costs , adds up to much higher than its acquisition cost . Therefore, the maintenance costs of the particularly important. This single piece of equipment for repair and update the model , the economic indicators based on the introduction reliability indices , such as the use of maximum principle and method , discuss equipment maintenance and updating of dynamic optimal control problem . Ningxia Hengli combined company's actual , to prove the actual results achieved . In addition , this article also covers preventive maintenance problems . Studied the finite time interval preventive maintenance model and found that the model is not perfect for the time division , only take into account the finite time interval complete preventive maintenance cycle and repair time , ignoring the remaining time. This article on the model is improved in the new model based on the application of the failure rate increase factor analysis and preventive maintenance failure rate effect relationship between the dynamic changes discussed so that a single piece of equipment maintenance times the lowest maintenance costs , preventive maintenance cycle ; and discussed considering the lowest maintenance costs and reliability of equipment operation to meet the constrained optimization problem , the optimal number of repairs and preventive maintenance cycle .

Related Dissertations

  1. Optimal Synchronization Control of a Class of Underactuated Lagrangian Systems,TP13
  2. Design and Implementation of Rotational Inverted Pendulum Control System Based on Sliding Mode Observer,TP13
  3. Study on Hybrid Remanufacturing/Manufacturing Inventory Control System Based on PULL Strategy,F224
  4. Control of a Switched Reluctance Generator for Small Wind Power Systems,TM352
  5. Substation Voltage and Reactive Power Optimization Control Strategy and Implementation,TM761.1
  6. Luan River pulverized coal-fired power plant ash removal system design and system optimization selection,X773
  7. Complex network reliability evaluation research,O157.5
  8. Wind power and pumped storage interconnected system stability and control,TV743
  9. Based on fuzzy reasoning annular multi -stage inverted pendulum modeling and control,TP13
  10. TRNSYS of a class -based Fuzzy Control Simulation of VAV system,TU831.3
  11. Aerospace dynamics of pseudo-spectral iterative solution,V412.41
  12. Transmission system reliability and application of statistical evaluation method,TM732
  13. Research on Traffic Assignment Problems Based on Intelligent Optimization,O224
  14. Attitude Control Technology of a Small Video Satellite,V448.2
  15. Research on Maintenance Management of Important Equipment of Fine Chemical Plant Based on RCM Theory,TH186
  16. The Study of Stochastic-parallel-gradient-descent Adaptive Optics Control Platform Based on DSP,O437
  17. Study on Optimal Control for Chaotic System Based on T-S Fuzzy Model,O232
  18. Optimal Control for Stable Solution of Repairable Human-Machine Systems,O232
  19. The Existence and Uniqueness of Classical Solutions and the Optimal Control Analysis for a Class of Nonlinear Mixed Forest Evolution Systems,O232
  20. Behavior Analysis and Optimal Control of Biological Population Dynamical Systems with Size-Structure,O232
  21. 400KA Aluminum Reduction Cell Energy Optimization Control System and Realization,TF821

CLC: > Industrial Technology > Machinery and Instrument Industry > Mechanical operation and maintenance
© 2012 www.DissertationTopic.Net  Mobile