Dissertation > Excellent graduate degree dissertation topics show

Dynamics Analysis and Optimization Design of Dynamic Vibration Absorber with Roller

Author: LiYuTian
Tutor: ZhangXiaoLong
School: Xi'an University of Architecture and Technology
Course: Mechanical Design and Theory
Keywords: Vibration control Roller Dynamic vibration absorbers Reciprocating vibration Parameter optimization
CLC: TB535.1
Type: Master's thesis
Year: 2010
Downloads: 68
Quote: 0
Read: Download Dissertation

Abstract


Vibration is a prevalent phenomenon in the production and life, and often is harmful, therefore, vibration needed to be controlled in a permitted range. The methods of vibration control usually are vibration elimination, vibration isolation, vibration absorption and structural modifications, etc.. Passive vibration absorber because of its damping effect, no external energy, low cost and high reliability has been widely applied. With the rapid development of the modern industry and the construction industry, the problems caused by vibration increasingly prominent, industrial production safety, high efficiency, people living in the comfort of the vibration control forward urgently required. In this case, the study of the dynamic absorber has the extremely vital significance. Based on the summary and reference to structure and methodology of previous dynamic vibration absorbers, the author puts forward a new kind of dynamic vibration absorber with roller, made dynamics analysis and optimization design of dynamic vibration absorber with roller. This study includes:For general mass-spring-damper type dynamic vibration absorber bandwidth, and broaden the band will bring the form of a complex situation, this paper proposes single roller dynamic vibration absorber and double rollers dynamic vibration absorber.This paper established mathematical model of single roller dynamic vibration absorbers and double roller dynamic vibration absorbers, and did numerical and analytical solution to mathematical model of single roller dynamic vibration absorber and making the non-dimensional treatment to the results of solving, according to the vibration of the main result of solution made a single roller in the attached vibration absorber when the harmonic excitation amplitude magnification curves under the action. According to the amplitude after the dimensionless equation to analyze and summarize the various parameters on the vibration amplitude of the main body and did the optimal design of the parameters, Making numerical and analytical solution to mathematical model of double roller dynamic vibration absorbers, probed into the damping principle and damping effect of double roller vibration absorbers.Through solving the amplitude of vibration system of additional roller vibration absorbers, can effectively restrain system’s vibration, and with a simple structure and vibration absorbers band width.

Related Dissertations

  1. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  2. Research on the 6-Dof Fault Tolerant Control of the Vibration Isolation Platform with Eight Actuators,TB535.1
  3. The Computer Simulation of Roller Drying for Flaky Agriculture Materials,S226.6
  4. Hot air drying characteristics of lettuce osmotic dehydration mass transfer kinetics and permeability,TS255.52
  5. Ring die pellet mill extrusion mechanism analysis and optimization of structural parameters,S817.12
  6. Study on the Subsurface Crack of Supporting Roller Made of Austempered Ductile Iron,TG156.3
  7. Research on Development of Skidding Class in Changchun Regular Institutions for Higher Teaching and Its Solutions,G862.8
  8. The Study on the Influence of Speed Roller Skating on 4-6 Years Old Children’s Physical Shaping and Quality,G862.8
  9. Independent - Cooperation in Changchun University Skating Teaching Mode Application Research Elective Courses,G862.8-4
  10. The Studies on Some Improvements of the GA and Their Applications in SVM,TP18
  11. The Research on the Design of Magnetostrictive Negative Stiffness Damper,TU311.3
  12. The Inverse System Predictive Controller for Structure Vibration,TU311.3
  13. Phased array ultrasonic testing optimization of key parameters,TP274.53
  14. Intelligent Support Vector Machine Approach and Its Application on Melt Index Prediction in Propylene Polymerization,TQ325.14
  15. Based on support vector machine motion prediction image stabilization technology,TP751
  16. Wool / Parster / cashmere compact Siro spinning process and yarn properties,TS104
  17. Polyester and viscose blended yarn MVS yarn spinning process and its impact on the performance and structure of,TS104
  18. Including wind farm grid voltage stability studies,TM712
  19. Automatic Target Recognition fluorescent magnetic particle inspection image processing techniques,TP391.41
  20. Neural Network Based on Particle Swarm Optimization color injection molding process,TQ320.662
  21. Mold cavity surface MRF technology research,TG580.692

CLC: > Industrial Technology > General industrial technology > Acoustic engineering > Vibration, noise and its control > Vibration and noise control and its use > Vibration isolation, damping materials and structures
© 2012 www.DissertationTopic.Net  Mobile