Dissertation > Excellent graduate degree dissertation topics show

Study and Preparation of BaTiO3-based NTC Ceramic Thermistors

Author: HuangZhenXing
Tutor: DengZhaoPing;YangJingYi
School: Chengdu University of Technology
Course: Materials Science
Keywords: BaTiO3-based NTC High room temperature resistivity BN doping
CLC: TQ174.1
Type: Master's thesis
Year: 2011
Downloads: 18
Quote: 0
Read: Download Dissertation

Abstract


At temperature below the Curie point, the BaTiO3-based ceramics presents g ood character of NTC (Negative Temperature Coefficient). The NTC character of BaTiO3-based ceramics is rare studied and reported. High room temperature re sistivity (ρ25) and low B constant thermistors have a broad market application perspective, widely used for temperature measurement and compensation, inrush current limiting, etc. But according to the semi-conduction theory, it is hard t o synthesis using the traditional methods.The aim of this work is to synthesis and study highρ25 and low B consta nt BaTiO3-based NTC ceramic thermistors. Solid-phase synthesis is used, addin g Pb to shift the Curie point, doping ND2O5 to semi-conduct materials and low erρ25, and doping BN to reduce sintering temperature. The influence of proces s and formulas is studied on the BaTiO3-based NTC materials. Main conclusio ns follow as:(1) Sintering temperature has a major effect on the materials. The relations hip ofρ25 and sintering temperature is U-shape. Samples show better NTC cha racter at sintering temperature 1180℃. Appropriate time of heat preservation te mperature helps materials semi-conducting. During this experimentρ25 is minim um when the time of heat preservation is 1h(2) Pb doping is effective for shifting the Curie point. When Pb=60mol%, the Curie point is 330℃which is a lot increment compare to the pure BaTi O3 materials. (3) BN can reduce the sintering temperature, also help semi-conduction. W hen BN=2mol%, samples’=35.7Ω·cm. Nb2O5 promotes semi-conduction and 1o werρ25. Also it can inhibit grain growth.(4)ρ25 of synthesized samples is above 1.3k and constant B is below 1k. It is typical highρ25 and low B NTC thermistor. The Curie point is 330℃, s howing good application perspective.

Related Dissertations

  1. LPS, tumor necrosis release substances on B16 mouse melanoma cell invasion and metastasis ability of,R739.5
  2. Design and Application for the Protecting Procedure of Intelligent Wine Cellars,TP277
  3. Effects of the CuO on the BaTiO3-based PTC Ceramics,TM28
  4. Study on NTC Characteristics of the BaSnO3 Ceramics,O472
  5. Study on Properties of Mechanical, Flame Retardancy and Electrical Conductivity of MWCNTs/PS Composites,TB332
  6. Effect of Filler Treatment on the Electrical Behavior of CB/HDPE Composites,TB332
  7. The PTC and NTC Effects of Conductive Polymer Composites,TB332
  8. Studies on the BaTiO3-based PTC Composites,TM28
  9. Microwave Processing of Electronic Oxide Ceramics,TQ174
  10. Study on the Preparation and Theory of BaTiO3 Semiconducting Ceramics and Multilayered Chip Thermistors by Wet Chemical Method,TN304
  11. Study on the Electrical Properties of Conductive PVC Solid and Foam Composites,TQ320.7
  12. Study on the Electrical Properties of Conductive PE Foam Composites,TQ317.3
  13. Study on the Electrical Properties and PTC Behavior of Carbonaceous Fiber/Polymer Composites,O631.3
  14. Research on the Design Method of Electronic Devices Heat Transport System Model,TN602
  15. Preparation and Electrical Properties of the Thick Film NTC Thermal Paste,TM54
  16. Precision thermostat control system optimization design,TH811
  17. Investigations on the Electrical Properties and Stabilities of Negative Temperature Coefficient Thermistors,TQ174.12
  18. Study on the Low-Temperature Sintering Characters and Electeic Properties of Mn-Co-Ni-O Based NTC Thermistors,TQ174
  19. Research on an In-vivo Measurement System of Tissue Thermophysical Parameters Based on Isothermal Heating Technology,R318.51
  20. Polyethylene / polyethylene and benzene complex PTC / NTC effect and radiation crosslinking studies its impact,TQ317

CLC: > Industrial Technology > Chemical Industry > Silicate > Ceramic Industry > Basic theory
© 2012 www.DissertationTopic.Net  Mobile