Dissertation > Excellent graduate degree dissertation topics show

Research of High-temperature Alloy Machining Simulation Technologies

Author: LiLeng
Tutor: KongXiangWei
School: Northeastern University
Course: Mechanical Design and Theory
Keywords: orthogonal metal cutting enhanced cooling high-temperature alloy numerical computation
CLC: TG506
Type: Master's thesis
Year: 2009
Downloads: 144
Quote: 2
Read: Download Dissertation

Abstract


Metal cutting is a process with non-linear and heat-stress coupled.The heat is mostly from the distortion of chip and the friction at the tool-chip and tool-workpiece interface. The big heat source increases the temperature and causes the tool’s abrasion. The cutting force denotes the cutting characters. The dynamic value affect the tool’s abrasion and the quality of machined surface. So the research of cutting temperature and force is important.In this paper, Air China, Shenyang Liming Aero-Engine Group, developed a certain model of aero-engine power turbine disk slot mortise Broaching process, for the first time a multi-tooth broaching finite element model and for the first time simulation technique introduction of cooling simulation Broaching, by using finite element analysis method. The main work is to explore the temperature’s distribution in tool area, chip area, and workpiece area and the force, to visualize the chip shape. Based on the finite element theory, the author provides the FE cutting model, uses the ABAQUS/Explicit software to simulate, according to the workpiece and tool’s material changing with temperature, changing the friction type, defining the chip separating law, subdividing the local parts, setting the cooling parameter, etc. After the FEA the common rules between cutting temperature, force and cutting parameters are denoted. The chip shape are shown. Combined with literature results and simulation results were compared to verify the finite element simulation of serrated chip feasibility.

Related Dissertations

  1. Research on Laser Cladding 4169 Superalloy Coating,TG174.44
  2. Grid Computing Using in Robot Machine,TP242
  3. Investigation for Maintenance Framework Design and Construction of the Pit in Grangzhou Zhujiang New Town,TU753
  4. Numerical Computation the Interior Flow Field of the New Type Axial-balancing Device Gap Based on CFD,TH311
  5. Investigation of Characteristics of Intense Relativistic Electron Beam Transportation,TN015
  6. Preparation, Structure and Properties of Ni-Cr-Fe Superalloy Foams,TB383.4
  7. Wear Rate Prediction of Laser Cladding Nickel-based Alloy on Uniform Design,TG174.44
  8. Operation Ventilation System and Key Technology in QinLin ZhongNan Mountain Highway Tunnel,U453.5
  9. Real options under jump diffusion process and its application in electric power investment,F224
  10. Study on Soft-Contact Electromagnetic Shaping and Directional Solidification of Special Alloys,TG111.4
  11. Spiking neural computing performance of the system,TP38
  12. Super- radiation mechanism RBWO preliminary study,O451
  13. Optimization Design of Cr-B-W-V System of Multielement Composite Strengthening High Temperature-Wear-Resistant Iron Base Surfacing Welding Alloy,TG455
  14. Tilt corrugated plate-fin heat exchanger fin heat transfer and flow characteristics,TK172
  15. Technical Study on the Construction Method Applied for Zhong Nanshan Extra-Longer Tunnel in Qinling Mountain,U455.4
  16. Study on the Mechanical Properties of Laser Rapid Forming of Rene’88DT Superalloy,TG132.32
  17. Study of New Method and Equipment of Combined Machining Based on High Temperature Alloy,TG669
  18. Numerical Computation and Computer Simulation of the Harmonic Gear Drive,TH132.41
  19. The Effect of Water on Creep Law of Deep Soft Rock,TU452
  20. Theoretical and experimental study of fluid dynamic mechanical face seals with deep spiral grooves,TH136
  21. The Limits for Installing Mechanical Ventilation in Railway Double Track Tunnels on Diesel Traction Lines,U459.1

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metal cutting and machine tools > General issues > Metal cutting process
© 2012 www.DissertationTopic.Net  Mobile