Dissertation > Excellent graduate degree dissertation topics show

Niobium alloy high temperature anti- oxidation of the silicide coating

Author: YinLei
Tutor: YiDanQing
School: Central South University
Course: Materials Science
Keywords: Nb high temperature oxidation resistance coating modified silicide MoSi2 interface diffusion
CLC: TG174
Type: Master's thesis
Year: 2004
Downloads: 341
Quote: 2
Read: Download Dissertation

Abstract


Nb-based alloys are important high temperature structural materials due to their high melting point, good properties of high temperature strength and corrosion resistance. But the applicability is limited by their poor oxidation properties. In order to solve this problem, the silicide was used as the high temperature oxidation resistance protective coating for Nb-based alloys. The modified Si-Cr-Fe coating by Ge added was prepared by second slurry-firing. The ultra-high temperature oxidation resistance MoSi2 coating was also produced by slurry-firing technology. The static and dynamic anti-oxidation properties were tested at various temperature 1200℃, 1400℃, 1600℃. The structure, composites and phase distribution of the coating and the relationship between these features and the oxidation resistance of the coating were investigated by SEM, EDS, XRD and Microhardness Analysis. A reactive diffusion model of interface between the MoSi2 coating and the Nb substrate was established. The characteristic and the disciplinarian were explored by compare and analysis of the collected data. Through the study, the following main conclusions can be drawn.The second sully-firing technology can improve the uniformity of the structure and the compaction of the surface on coating, widen the transitional layer, and improve the oxidation resistance properties. The modified element Ge mostly concentrated in the body of the coating and the interfacial layer. It can improve the anti-oxidation properties, and effectively stop the extension of the crack in coating. A multi-layer structure can be found in coating. The microhardness was gradually decreased through the cross-section on the coating, and a larger change was found on the interface between the various layers. The good anti-oxidation properties were decided by the integrative effect of the surfaced status, structures of the coating, and the thermal expansion coefficient mismatch.The high temperature oxidation resistance property of MoSi2 coating is better than the modified Si-Cr-Fe coating. Both of the two coatings can selective oxidation to form oxide glass with the self-healing function on the surface. The impurity, which existed in slurry, destroyed theintegrality of the surface, and reduced the anti-oxidation properties of the coating. The interface between the coating and the substrate was metallurgic combination, and a transitional layer was formed by diffusion. The composite multi-layer structure improved the oxidation resistance properties of the coating. As further interdiffusion of the element, which between the coating and the substrate, a large number of cavities were formed and perforated transversely. The transverse cracks can also be formed by thermal stress. The coating was broken through the interface between the body of the coating and the transitional layer.Three hypotheses were proposed: 1) the diffusion is very slow, and the whole process was controlled by the diffused law; 2) the diffusion should belong to body diffusion, but the short distanced diffusion; 3) the reaction between the reactive phases should be completed instantly. In other words, the quasi- equilibrium status should be always maintained in the reactive interface. A reactive diffusion model of interface between the MoSi2 coating and the Nb substrate was established based on the Nb-Si binary phase diagram and the experimental results. The calculated numerical values were compared with the experimental results, and the factors of the according error were analyzed. Several referenced opinions were proposed for study the high temperature oxidation resistance protective coating of Nb-based alloys further.

Related Dissertations

  1. The Application of Ultrasonographic Examination of Fetal Nuchal Translucency, Nasal Bone, Which Combined Measurement Maternal Serum Free Beta-HCG, and Pregnancy-associated Plasma Protein a for Screening Down’s Syndrome in the First-trimester.,R714.5
  2. Cr on Low Carbon High Niobium X80 Pipeline Steel recrystallization and phase transition,TG111.7
  3. The Study on the Medium-Temperature Spectrum of Internal Friction in Fe-Nb-C Alloys,TG111
  4. Research of Microalloying Nb and Ti in Ultra-purity 430 Ferritic Stainless Steel,TG142.71
  5. Study on (Ti, Nb) N Hard Coating Synthesized by Reactive Magnetron Sputtering,TB43
  6. Study on Heat Treatment of Zr-Nb Alloy and Fatigue Performance of Fillet Weld of FV520B,TG405
  7. Several Researches on the Density and Service Temperature of MoSi2 Heating Elements,TM924.03
  8. Early intervention of intrauterine infection caused brain damage in offspring of white matter the myelin structure changes and brain tissue NB-3 expression,R714.2
  9. Research on Synthesis and Property of the Ultrafine Grain and Nanocrystalline Ti-Al Alloy,TF124.5
  10. Preparation and Mechanical Properties of Short-Cut Cf/MoSi2–SiC Composites,TB33
  11. Preparation and Characterization of Materials for Cdte Thin Film Solar Cell,TM914.4
  12. Study on Elastic Energy Dispersion Spectrum of Fe-Nb Alloy,O482
  13. NONM Group Corporate Cultural Study Based on the Strategy-Change,F270
  14. Effects on Microstructures and Mechanical Properties of Cast Steel by Micro-Alloying,TG269
  15. Research of MC/Nb-Tiβ Composites Microstructure and Phase Evolution,TB331
  16. The Research on the Producing and Mechanical Character of Laminated Ciramic,TQ174.1
  17. Control of the physical properties of niobium oxide powder,TF125.242
  18. The source PML-NB related protein TTRAP of intracellular cytology Function of,Q343
  19. Doping of ZrO_2 and Y_2Ba_4CuNbO_x the prepared YBCO superconducting bulk performance TSIG legal system,TM26
  20. Nb: KTP crystal growth and structural characteristics,O782
  21. Preparation and Properties of Nb-Ti-Ni Alloys Membranes for Hydrogen Permeation Properties,TG146.15

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metal corrosion protection,metal surface treatment > Corrosion control and protection
© 2012 www.DissertationTopic.Net  Mobile