Dissertation > Excellent graduate degree dissertation topics show

Of trace scandium and zirconium on the microstructure and properties of Al-Mg-Mn alloy

Author: ZhuDaPeng
Tutor: YinZhiMin
School: Central South University
Course: Materials Physics and Chemistry
Keywords: Scandium Of zirconium an Al- Mg -MH alloy Mechanical Properties Microstructure Strengthening mechanisms Recrystallization
CLC: TG115
Type: Master's thesis
Year: 2004
Downloads: 203
Quote: 1
Read: Download Dissertation


Six different magnesium content of Al-Mg-Mn and Al-Mg-Mn-Sc-Zr alloy ingot metallurgy prepared by the room temperature tensile , hardness testing , conductivity measurement , metallographic analysis , TEM methods such studies trace scandium and zirconium to the alloy mechanical properties , electrical properties , and its organizational structure and changes in the law , and the analysis and interpretation of the theory . The results show that : 1 . Al-6Mg-Mn-Sc-Zr cast alloy at homogenizing annealing hardening phenomenon, the change in hardness because the solidification process of the formation of a supersaturated solid solution containing scandium zirconium decompose the precipitated Al 3 (Sc, Zr) particles leads to an increase in hardness of the alloy . The conductivity increases with increasing annealing temperature , extend the time for insulation . The increase in the conductivity of the scandium-containing zirconium decomposition of the supersaturated solid solution to form a dispersion-type complex phase structure . Al-6Mg-Mn-Sc-Zr alloy ingot homogenizing annealing temperature of 300 to 350 ° C , the annealing time of 6 to 8 hours . 2. Trace Sc and Zr added to the Al-Mg-Mn alloy the primary alloy precipitated during solidification Al 3 ( Sc, Zr ) particle become effective heterogeneous nuclei greatly refine the grains of the alloy . Al-6Mg-Mn-Sc-Zr alloys homogenizing annealing process precipitation the secondary Al 3 < / sub > (Sc, Zr ) particle , strong pinning of dislocations and subgrain boundaries inhibit alloy hot-rolled the process of dynamic recrystallization . 3. Strengthening of Al-Mg-Mn-Sc-Zr alloys , including Mg solid solution strengthening , adding of trace scandium and zirconium alloy ingots fine grain strengthening and secondary Al 3 ( Sc, Zr) the dispersion caused by the particles in the alloy is precipitation hardening, and produced during the processing of the subgrain structure . 4. Add trace Sc and Zr can significantly improve the recrystallization temperature in the Al-Mg-Mn alloy after cold rolling , recrystallization onset temperature increased by about 120 ℃ . Sc, Zr joint added the formation of secondary aluminum compound Al 3 ( Sc, Zr ) having a strong pinning effect on dislocation and subgrain boundaries , then impede the crystallization nucleation , thereby effectively suppressing recrystallization.

Related Dissertations

  1. Reactive Hot-Pressing and Mechanical Properties of (ZrB2-ZrO2)/BN Composites,TB332
  2. Research on Welding Characteristics of CO2 Laser-GMA Hybrid Welding for Ultra-Low Carbon Bainitic Steel,TG456.7
  3. Microstructure and Mechanical Properties of Mg-Zn-Y-Zr Alloys,TG146.22
  4. Investigation on Microstructure and Properties of Cadmium-Free Silver-Based Intermediate Temperature Filler Metals,TG425.2
  5. Research on Technology and Mechanism of Joining Cemented Carbide to Carbon Steel,TG454
  6. The Investigations on the Characteristics and Mechanism of NIR Emission from Bi-doped Silicophosphate Glasses,TQ171.1
  7. Study on the Recycling of Post-Consumer Polyester Textiles,X791
  8. Synthesis of Polysulfones and Modification for Epoxy Adhesives,TQ433.437
  9. Preliminary Study on Salt-Tolerant Mechanism of the New Pennisetum Purpereum Schumach Variety-Sumu No.2,S543.9
  10. Study on Characteristics of Morphology Anatomy and Physio-Biochemistry of Two Ecotype Varieties Cucumber Leggy Seedilings,S642.2
  11. Structure and Characterization of Room Temperature Self-crosslinked Acrylonitrile-butadiene-styrene,TQ325.2
  12. The Research on Extrusion Parameters Through the Plate Billet of Magnesium Alloy,TG379
  13. Modification of Talc Powder and Its Reinforcing and Toughening on Recycled Polypropylene,TQ325.14
  14. Study on Microstructure and Texture during Hot Rolling and Normalizing of Twin-roll Cast Silicon Steel Strip,TG335.11
  15. Preperation of Low Friction and Wear Resistant High-Purity Alumina Ceramic,TQ174.1
  16. Rolled Mg-Zn-Ce-Zr (Mn) alloy microstructure and mechanical properties of,TG339
  17. Simulated lunar ambient temperature magnesium alloy microstructure and mechanical properties of,TG146.22
  18. A Study on the Fullerene Nanocomposites,TB383.1
  19. Rinse jeans and Shade on physical and mechanical properties of Research,TS190.1
  20. Fe 3 O 4 , carbon nanotubes and graphene reinforced regenerated cellulose membrane research,TB383.1
  21. Lactic acid -based copolymer / vermiculite ceramic composites and properties of,TB332

CLC: > Industrial Technology > Metallurgy and Metal Craft > Metallurgy and Heat Treatment > Metallurgy ( Physical Metallurgy ) > Analytical tests of the metal (Metal Testing and Materials )
© 2012 www.DissertationTopic.Net  Mobile