Dissertation > Excellent graduate degree dissertation topics show

STT Wave Control of the Welding Power on Gauss Function and Fuzzy Control

Author: WangZhiYing
Tutor: ZhuJianLin
School: Xiangtan University
Course: Power Electronics and Power Drives
Keywords: STl wave control law Gaussian function Fuzzy Control
CLC: TG434
Type: Master's thesis
Year: 2004
Downloads: 92
Quote: 0
Read: Download Dissertation


C02 gas shielded arc welding is the most widely used welding methods . But it is the prevalence of to splash the problem . The splash the problem can be resolved from non-electric and electric . The electrical aspects of the solution , based on the development of high-power electronic devices have been proposed Surface Tension Transfer (STT) waveform control method . It can accurately than the conventional control method of any effectively inhibit splash . CO2 body protection based on the Gaussian function welding current and voltage curves merit to identify the best curve and curing in the SRAM to track through a two-dimensional fuzzy controller optimization curve to C02 gas shielded arc welding STT wave control method . First, dimensional fuzzy controller with Matlab simulation to verify the correctness of the fuzzy control rule table ; Then, the main circuit and differential amplifier circuit simulation using Multisim200l to verify the feasibility of the PWM chopper circuit and selection of the differential amplifier circuit amplifying device to suppress the zero drift . Then designed the experimental apparatus of CO2 gas shielded welding STT wave control hardware and software systems . Experiments show that proposed in this paper to suppress the splash program correctness . The simulation work done in this paper prove the feasibility of this paper, C02 gas shielded arc welding STT waveform control law programs : the experimental system and lay the foundation for future practical applications .

Related Dissertations

  1. Research of Image Guided Technology for Cable Tunnel Patrol Vehicle,U469.6
  2. The Application of Fuzzy Control and Neural Network in Planar Double Inverted Pendulum,TP273.4
  3. The Grid-Connected Wind-solar Hybrid Generation System and Maximum Power Point Tracking,TM61
  4. Optimal Control of Emulsion System in Cold Rolling,TP273
  5. Research on Grinding and Classification Process Control of Sijiaying Concentrator,TP29-A1
  6. Research of Control Strategy Based on the Electro-hydraulic Proportional Position Control System,TH137.52
  7. Study on Autoleveller System of Drawing Frame Based on Adaptive Control and Fuzzy Control,TS103.3
  8. Study on Navigation and Obstacle Avoidance Technique for Auto Guided Vehicle (AGV),TP242
  9. Large wind turbine pitch control independent technology research,TM315
  10. TRNSYS of a class -based Fuzzy Control Simulation of VAV system,TU831.3
  11. Rough set based on fuzzy logic washing machine Application of Fuzzy Control System,TP273.4
  12. Research on Obstacle-avoiding Fuzzy Control System of Mine Rescue Robot,TP242
  13. Research on Tuning Method of PI Controller Based on Fuzzy Inference,TP273.4
  14. Research of Energy Saving for Convertible Frequency Air-Condition Based on Fuzzy Neural Network,TM925.12
  15. Research of Automatic Train Operation System Based on Fuzzy Self-Adaptive PID,U284.48
  16. The Research about Low-frequency Therapy System Base on Fuzzy Control Theory,TP13
  17. A Preliminary Research on Soft-sensing Technology in Fatigue Test in the Transmission Test System of the Cooling Fan, Hydraulic Pump and Hydraulic Motor,TH137.5
  18. Based on the angle of the knee walker functional electrical stimulation Fuzzy Control,R651.2
  19. AGV on SOPC - based visual servo control system,TP242
  20. Research on Rare Earth Extraction Process Control Method Based on Video Surveillance,TP273
  21. Analytical and Limiting Structures of Typical Fuzzy Controllers,TP273.4

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding equipment > Arc welding equipment
© 2012 www.DissertationTopic.Net  Mobile