Dissertation > Excellent graduate degree dissertation topics show

Synthesis and Grain Refining Behavior of New AlTiC Refiners

Author: MaZuo
Tutor: LinJianGuo;LiJianGuo
School: Xiangtan University
Course: Materials Physics and Chemistry
Keywords: ultrasonic AlTiC grain refiners grain refining mechanism nucleation
CLC: TQ133
Type: Master's thesis
Year: 2004
Downloads: 189
Quote: 4
Read: Download Dissertation

Abstract


Grain refinement has been an important technique for improving the soundness of aluminum products for most of this century. The addition of grain refiners is one of the most effective, practical and economic way of grain refining in the industrial production,Al-Ti-C grain refiners are effective. Thus, it is necessary to develop new preparation technics of the master to control its composition and microstructure, especially particle distribution, and to investigate grain refinement mechanism, which are important for production of aluminum alloy and offspring process of aluminum output (such as aluminum foil).In this work, a low cost and high efficient Al-Ti-C master alloy was synthesized by aluminothermal reaction under ultrasonic vibrations. The effects of ultrasonic vibrations on synthesis process and microstructures of the masters were investigated, and the grain refining performance on pure aluminum of the AlTiC masters with two compositions synthesized under ultrasonic vibrations was studied in comparison with that of the commercial masters, i.e., Al5Ti1B/Al3Ti0.15C/Al5Ti0.2C. The effect of Si and Fe contents in pure aluminum on refining effect of Al-Ti-C was systematically investigated. The morphologies of the nucleus in the refined pure aluminum were observed and analyzed, and the invalidation of AlTiC/B during heat preservation for a long time was preliminary study. The results of this work are as follows: Ultrasonic vibrations during Al-Ti-C preparation not only accelerated reaction, but also improved the microstructure of the final product. Demonstrate that <WP=5>Al-Ti-C master has more effective and potential advantages on refining aluminum alloy.

Related Dissertations

  1. Research on Mud Density Measuring Method Using Ultrasonic,TE256.7
  2. Study on Theory and Experiment of Wire Drawing with Composite Ultrasonic Vibration,TG663
  3. Technology of Filling Clearance and Optimizing the Bonds during Ultrasonic Brazing,TG454
  4. Gui Design and Application Oriented to Embedded Ultrasonic Detecting System,TP274.53
  5. Isolated systolic hypertension in patients with cardiac ultrasound characteristics of traditional Chinese medicine dialectical correlation exploration,R544.1
  6. Research on ASP Flooding Oil Pipeline Ultrasonic Eliminating Scale Technology,TE39
  7. Intrusion detection based on the ultrasonic echo envelope in the military security patrols,E919
  8. Study on Removal Efficiency of Organic Phosphorus Pesticides Residues by Ultrasonic and Air Bubble Cleaning,S481.8
  9. Study on Pretreatment of Clarification with Extracting Solution from Silkworm Dropping,TQ461
  10. Optimization of Extraction of Gastrodin from Rhizoma Gastrodia by Response Surface Methodology,R284.1
  11. Technological Research on Preparation of High Activity Walnut Pulp by Ultrasonic-compound Enzyme Synergistic Method,TS255.6
  12. Distribution Feature and Source Discrimination of Pahs in Northern Taihu Lake,X832
  13. Application of Hysteroscopy in Diagnosis and Treatment of Refractory Clinical Analysis of 56 Cases of IUD,R169.4
  14. Research on Transient Dynamics of Ultrasonic Horn,TG663
  15. Research on Orbit-holding Traveling Mechanism of Pipeline Girth Welds Scanning Equipment,TE973.3
  16. Research on the Design of Scanners for Pipeline Complex Weld Inspection,TG439.9
  17. Research of Ultrasonic Testing System Based on ARM Controller,TP274.53
  18. Effect of Ultrasonic Wave on the Stability of Mixed Crude Oil,TE622.1
  19. Research on the Degradation of Straw Fiber for Chemical Derivatives Development,TQ352
  20. Study on the Refining of Waste Silk Bisu Material with Ultrasonic Method,TS146
  21. Research on Effects of Ulstrasonic Waves on Wool Fiber Reactive Dyeing in Low Temperature,TS193.1

CLC: > Industrial Technology > Chemical Industry > Inorganic compounds, the chemical industry of the metal elements > Section III group metal elements of inorganic compounds
© 2012 www.DissertationTopic.Net  Mobile