Dissertation > Excellent graduate degree dissertation topics show

Study of Dry Thin Wall Cylinder Liner for Diesel Enginecylinder Block Bore and Cylinder Bore Machining

Author: GaoHai
Tutor: XieHui
School: Tianjin University
Course: Power Engineering
Keywords: Cylinder wear Casting blank Reasonable process Cylinder bore and the mouth Platform reticulate And Cylinder Mistakes Antifriction measures
CLC: TK426
Type: Master's thesis
Year: 2003
Downloads: 129
Quote: 4
Read: Download Dissertation

Abstract


Abstract This paper resulting in deformation of the cylinder liner bore wear analysis of the causes , comprehensive discussion of the elements and solutions in the machining process causing these reasons , the main processes , especially the guarantee of the accuracy of the cylinder bore with the Mouth and processing prone to quality problems caused by the phenomenon , including the only the mouth depth unstable , cylinder boring jumped knife from equipment design , use , adjustment and maintenance ; tooling design , improved adjustment ; adjust the use of the tool , toolholder ; processing parameters set specific analysis shows . In addition , on the surface of the cylinder liner hole formation platform reticulate specific see Italy from theory to practice , the choice of the device features ; precautions in the use of tooling design and processing ; discourse with a lot of practical experience a qualified surface morphology of honing head , equipment, process parameters , and honing stone strips , honing media critical honing quality . Easy to produce misunderstanding and Cylinder ( with cylinder gap , roughness , etc.) were summarized from the material, shape, surface treatment of the piston ring friction reducing measures do some research .

Related Dissertations

  1. Study on Surrounding Rock Deformation Law and Processing Parameters in Extra-thick Seam of Fully Mechanized Caving Mining with Great Mining Height,TD355
  2. Study on Stability of the Vi-class Surrounding Rock of Large-span Shallow Tunnel under Unsymmetrical Pressure,U451.2
  3. Study on the Mathematical Model of Solidification Thermal Transmission in the Process of Continuous Casting Slab with Speed Changing,TF777.1
  4. Research on the Technology of Plasma Spraying for Locomotive Cylinder,U269.5
  5. Quality Questions Study of Diesel Engine Cylinder Block Bore and Cylinder Bore Machining,TK426
  6. Development of the New Material and Study of Confectioning Process of Grinded Paste Machine Cylinder,TG250
  7. Study and Development of CAPP Based on Manufacturing Resource Restriction,TH166
  8. Study on Instrument Calibrator for Diesel Engines and Its Integrated Information Management System,TK426
  9. Residual Stress Analysis of Diesel Engine Casting and Annealing Process to Improve,TK426
  10. The Simulation on Pore Diameter Shrinkage of Connecting Rod Bushing under Interference Fit in Diesel Engine,TK426
  11. Process Optimization for 170 Series Diesel Engine Pivotal Parts,TK426
  12. Process Analysis of Cylinder Block Assembly of Pre-assembly for WD618 Diesel Engine,TK426
  13. Research on Strengthen Techniques of LANDKING WP12 Crankshaft,TK426
  14. Research and design of the 4102 diesel engine assembly line,TK426
  15. Diesel engine assembly process visualization key technology research and implementation,TK426
  16. The Design and Practise of Productive Line for CYQD32 Blocks,TK426
  17. Quality Questions Study of Diesel Engine Cylinder Block Bore and Cylinder Bore Machining,TK426
  18. Gun-Boring Technologic Application on Processing Inlet and Exhaust System of Diesel Engine,TK426
  19. The Renovation Plan for 102 Series Diesel Engine Block Transfer Line,TK426
  20. Machining Process Design Research for 4112 Diesel Engine Block,TK426
  21. Improvement of Casting Product Quality by Introduction of Middle Frequency Induction Technology,TK426

CLC: > Industrial Technology > Energy and Power Engineering > Internal combustion engine > Diesel engine > Manufacturing process,installation
© 2012 www.DissertationTopic.Net  Mobile