Dissertation > Excellent graduate degree dissertation topics show

Preliminary study of the semi-solid low pressure forming technology

Author: LiuWenYi
Tutor: LuDeHong
School: Kunming University of Science and Technology
Course: Materials Processing Engineering
Keywords: Low press forming Stream forming Vacuum press dispatching foundry Vacuum attract casting Mold fulfilling
CLC: TG249.2
Type: Master's thesis
Year: 2007
Downloads: 127
Quote: 2
Read: Download Dissertation

Abstract


Semi-solid forming and processing technology is a new-developed material machining strategy. Semi-solid stream forming in the semi-solid forming and processing technology is a hotspot in China and foreign countries.This paper mainly researches on designing a set of multiuse foundry equipment and studies on three factors effect to the fulfilling mold performance of semi-solid A1-Cu alloy slurry which are vacuum degree, temperature of the mould and intensity of the electromagnetism milling. This paper also analyzes its structure and primarily researches on the two mechanisms of the fulfilling and fulfilling while stopping flowing.Designing and entrust processing a set of foundry equipment based on the vacuum press dispatching principle. This equipment can be used for vacuum press dispatching foundry, vacuum attract casting, low press foundry and regulative press casting etc. After circulate for a period of time, it has improved that the equipment worked well. Adjusting of the techniques in the test process, it has been confirmed that the irrigating craftwork of the semi-solid is vacuum attract casting.According to the irrigating craftwork, I have studied on three factors effect to the fulfilling mold performance of semi-solid A1-Cu alloy slurry which is vacuum degree, temperature of the mould and intensity of the electromagnetism milling. Its fulfilling mold performance is expressed by fulfilling length. The vacuum degree in the examination chose from three parameters:-0.04MPa,-0.05MPa,-0.06MPa;and the temperature of the mould chose from two parameters: 200℃, 240℃;and intensity of the electromagnetism milling chose from two parameters: 12A,18A.The higher vacuum degree was, the relative better fulfilling mold performance was. Moreover, the vacuum degree effected notably. The relativity of the mould temperature and intensity of the electromagnetism milling also effected but their effects were not very notable. In addition, as the wall thickness of the foundry increased, the fulfilling length of semi-solid slurry grew longer and its performance turned better. Through analyzing the structure of the semi-solid low press forming fulfilling foundry mold, it had been found the typical semi-solid low press forming structure. The primary big grainαstructure, exiguousαstructure, eutectic structure and shrinkage. This paper has explained the reason that exterior appearance formed in the low press forming and narrated the mechanics of stopping flowing when the semi-solid slurry was under low press forming which was as the temperature turn down the liquid quotient formed nucleus and grew up gradually then formed net frame with the existing bulky branch in the semi-solid slurry under low press forming. Thus it had prevented the liquid flowing. Meanwhile through summarizing and analyzing of the existing disfigurements in the semi-solid slurry under low press fulfilling, it had been particular narrated of the token characteristics and the engendered reason and put forward the measure of defending. This paper has set up well base for further examination of the semi-solid slurry under low press forming.

Related Dissertations

  1. A356 Alloy Micro thixoforming its mechanism of ultrasonic vibration assisted,TG249.9
  2. SiC_p/6061Al Composite Fabricated by Liquid Phase Mechanical Stirring Casting,TG249.9
  3. Investigation on Processing Property of Water-Based Coating for Expandable Pattern Casting,TG249.5
  4. Process Simulation to Die-Casting Filling Mould and Solidification of the Automobile Engine Magnesium Alloy Cover on ProCAST,TG249.2
  5. Effect of Electromagnetic Stirring on the Microstructure and Property of the Centrifugal Casting High Speed Steel Rolls,TG249.4
  6. Copper Electrode and Casting Process Simulation,TG249.5
  7. Preparation of semi-solid forging bimetallic composite technology,TG249.9
  8. Magnesium Alloy Lost Foam Casting numerical simulation of the filling performance,TG249.5
  9. Analysis and Study on the Paramerers of Die-casting Based on Foundary CAD/CAE,TG249.2
  10. Chromium zirconium copper alloy semi- continuous casting preparation and defect control,TG249.7
  11. The new semi-solid slurry preparation process and the ball chute Mechanism,TG249.9
  12. Study on the Pelletization of the Manganese Alloys,TG249.9
  13. Numerical Simulation and Process Design of Low Presure Casting for Automobile Engine Cylinder,TG249.2
  14. Study on the Micro Thixoforming Process of Semi-Solid A356 Alloy in Meso Scale,TG249.9
  15. The Study of Electromagnetic Low-pressure Casting Electromagnetic Force Compensation Model,TG249.2
  16. Twin-screw Whip Produce Aluminum Alloy Semi-solid Billet,TG249.9
  17. Al-4.5% Cu alloy centrifugal casting process experimental study and finite element analysis,TG249.4
  18. Aluminum Casting Process,TG249.5
  19. High flow proportional valve developed fast throttle,TG249.2
  20. Numerical Simulation of Flow Field and Temperature Field of Aluminium Alloy Piston in Metal Gravity Casting Process,TG249.3
  21. Study on Squeeze Casting Process of 2024 Aluminum Alloy Hollow Axle Body of Transmission Shaft,TG249.2

CLC: > Industrial Technology > Metallurgy and Metal Craft > Casting > Special Casting > Pressure die casting
© 2012 www.DissertationTopic.Net  Mobile