Dissertation > Excellent graduate degree dissertation topics show

Experimental Research on Flexural and Seismic Behavior of Steel Fiber Reinforced Concrete Shear Wall

Author: ZhangMing
Tutor: ZhaoJunï¼›GaoDanYing
School: Zhengzhou University
Course: Disaster Prevention and Reduction Engineering and Protective Engineering
Keywords: steel fiber reinforced concrete shear wall flexural capacity stiffness capacity of dissipation energy cross-section crack-resistant property
CLC: TU375
Type: Master's thesis
Year: 2007
Downloads: 127
Quote: 2
Read: Download Dissertation

Abstract


With the development of high-rise building and widely use of concrete structure, shear wall structure was taken more and more attention because of the great lateral rigidity, high capability of energy dissipation and load bearing. But with the enhanced concrete strength and the increasing height of building, the problems of brittleness and debasing earthquake resistant behavior which were caused by reduction of cross section were more and more prominent. Steel fiber concrete has got social recognition by its better property of ductility and the property of energy absorption and dissipation, and has been widely used in transportation, bridge, and civil engineering. But the research on the steel fiber concrete shear wall is less for the moment.In this dissertation, the experimental study was carried out on the bending property and seismic behavior of 5 steel fiber reinforced concrete shear walls and 1 normal concrete shear wall under cyclic reverse load. The main achievements of the dissertation are as follows:(1) By the experiment of cyclic reverse load of 5 steel fiber reinforced concrete shear walls and 1 normal concrete shear wall under cyclic reverse load, the effect of steel fiber volume fraction and steel fiber concrete strength on the load-carrying capacity of shear walls was emphatically analyzed; the bending mechanism and calculation model of shear wall was discussed. Finally, the calculation model and formulas of steel fiber concrete shear wall were suggested.(2) The influence of steel fiber volume fraction and steel fiber concrete strength on the hysteretic behavior,ductility,ability of dissipation energy and stiffness of shear walls were studied.(3) The cross-section crack-resistant property of shear walls affected by the volume fraction of steel fiber and steel fiber concrete strength were emphatically analyzed, the calculation model and calculation formulas of cross-section crack-resistant capacity of steel fiber reinforced concrete shear walls were put forward connected with the computational theory of cross-section crack-resistant of normal concrete. And the simplified formulas were also put forward.(4) The crack widths of some cracks were recorded in all process of experiment .The developing process of the crack width and the crack width affected by steel fiber was analyzed; and the general rule that the crack width affected by steel fiber was put forward.

Related Dissertations

  1. Flow Field Numerical Simulation and Performance Analysis for the Conical Hydrostatic Bearing,TH133.36
  2. The Theoretical and Experimental Research on Preload and Supporting Stiffness of a Wire Race Ball Bearing,TH133.331
  3. Simplified Analysis of Semi-Rigid Steel Frames under Vertical Loading,TU391
  4. Experimental Study on Flexural Behavior of Stone Slabs Strenthened with Forrencent Mortar,TU363
  5. Multi-storey Steel Structure Design Method Based on Optimum Lateral Stiffness Distribution,TU973.13
  6. Vertical-axis Magnetic Levitation Wind Turbine Bearing and Blades,TM315
  7. Dynamical Parameterized Modeling of Fixed Joints in Machine Tools,TP391.72
  8. The Research on the Design of Magnetostrictive Negative Stiffness Damper,TU311.3
  9. Study on Mechanical Properties of Transfer Beam with Ground Walls under Vertical Load,TU973.2
  10. The Study of Arthroscopic Release in the Treatment of Knee Joint Stiffness,R687.3
  11. 6R industrial robot joint stiffness identification and experimental study,TP242.2
  12. Nonlinear Progressive Failure Analysis of Thick Composite Laminate under Biaxial Load,TB33
  13. Four -step braided composites under different stress levels bending fatigue behavior,TB332
  14. Direct-drive A / C -axis milling head double pendulum angle structural analysis and performance testing,TG547
  15. Alpine environment PTT fabric handle research,TS101.923
  16. High-speed heavy ball screw axial dynamic stiffness and Experimental Research,TH132
  17. Preparation and Properties of C/SiC Composite Spring,TB332
  18. Several key issues research in the design and construction of high and steep slope tall piers,U445.559
  19. Railway pier, span , long associated girders bridge CWR Longitudinal Stiffness of Piers optimization,U448.13
  20. Economy Bailey Truss double guide beam bridge machine assembly design and applied research,U445.36
  21. Experimental Investigation and Study on the Bridges Strengthened Using Steel Plate and Concrete Composite Strengthening Technique,U445.72

CLC: > Industrial Technology > Building Science > Building structure > Concrete structure,reinforced concrete structure > Reinforced concrete structures
© 2012 www.DissertationTopic.Net  Mobile