Dissertation > Excellent graduate degree dissertation topics show

Research on Selective Laser Sintering of Composite Ceramic

Author: LeGuan
Tutor: TianZongJun
School: Nanjing University of Aeronautics and Astronautics
Course: Mechanical Manufacturing and Automation
Keywords: Selective laser sintering Nano materials Ceramic Ni/WC Heat-conducting medium
CLC: TF124.5
Type: Master's thesis
Year: 2007
Downloads: 288
Quote: 3
Read: Download Dissertation

Abstract


Selective laser sintering (SLS) is one of the most attentive rapid prototyping techniques due to its suitability to process almost any power materials.In this paper, a series of researches on process parameters of selective laser sintering of composite ceramic were carried out. The main works and gain are as following:(1) Analyzing the sintering theory of nano material and the heat conduction theory of laser machining, the mathematic model of grain size growth of nano material in laser irradiation was built. The growth trends of grain size were simulated under different laser technological parameters.(2) Analyzing the selective laser sintering of metal powder materials, especially the theory of ball effect. Introduce the heat-conducting medium into process of composite ceramic manufacture.(3) Single layer selective laser sintering of composite material (Ni/WC) was carried out. Process parameters which affect the sintering quality of selective laser sintering of composite ceramic were analyzed.(4) Used KGH95 Nickel-based metal powder materials as heat-conducting medium and experiments were carried out with SLS for composite ceramic powder materials (Ni/WC). Some 3D-shape composite ceramic parts with compact and even structure were sintered successfully.(5) Mix the SiC nano particles into the powder materials used in step (4) according to the different wt%. With the mixed nano-micro composite ceramic powder, 3D-shape composite ceramic parts were sintered successfully. Some SiC nano particles were dispersed into Nickel-based metal by powerful laser. WC micro particles were separated into smaller particles existent in Nickel-based metal. Nano-micro composite ceramic material can be sintered with SLS.

Related Dissertations

  1. Recovery Whey Soy Protein by Microfiltration and Development of Whey Powder,TQ936.2
  2. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  3. Preparation of Micro-Arc Oxidation Ceramic Coating on Mg Alloy and the Research of Galvanic Corrosion,TG174.453
  4. Fly Ash study of low temperature ceramic foam,TU52
  5. Technology Study on Bricks of City Waterworks Sludge,X703
  6. Evaluation of between the Occlusal Force and the Tissues Health Surrounding Implant of ITI Implants with Zirconia All-ceramic Crown,R783
  7. Anterior crowns analysis of the clinical effects,R783.4
  8. Disscuss on the Material of Ceramic Sculpture,J527
  9. Fabrication of YAG Transparent Ceramic by Solid-state Reaction Method and Centrifugal Casting of Nd: YAG,TQ174.62
  10. PTC formula and technology research,TQ174.6
  11. Modification of Ceramic Membrane and Its Use in MD,TQ028.8
  12. Research on the Synthesis of the Pr-zircon Yellow Pigments and the Ceratmic Ink,TQ622.1
  13. The Study of Microstructure and Performance of La2 O3+CeO2-Ni-WC Composite Coating by Vacuum Fusion Sintering,TG174.44
  14. Research on Tax Source Management of the Ceramic Industry,F426.71
  15. Preparation and Properties of the New Glass Infiltrated 3Y-TZP All Ceramic Dental Materials,TQ174.75
  16. Preperation of Low Friction and Wear Resistant High-Purity Alumina Ceramic,TQ174.1
  17. The Analysis about Development of Foshan Ceramic Enterprises in Post-Financial Crisis Era,F426.71
  18. Processing and Property Study of Mg2TiO4 -based Microwave Dielectric Ceramics,TN04
  19. Medical ultrasound imaging Piezoelectric transducer probe studies,TN384
  20. Study on Fabrication of Biological Porous Ceramic with Controlled Pore Structure,R318.08
  21. Preparation and Selective Laser Sintering of Carbon Fibre/polyamide 12 Composite Powders,TF123.74

CLC: > Industrial Technology > Metallurgical Industry > Metallurgical Technology > Powder metallurgy (metal ceramic technology ) > Powder molding, sintering and post-processing > Sintering process
© 2012 www.DissertationTopic.Net  Mobile