Dissertation > Excellent graduate degree dissertation topics show
Investigation of the Microwave Passive Component Based on the Dielectric Substrate Structure
Author: RanLiang
Tutor: WuXianLiang
School: Anhui University
Course: Electromagnetic Field and Microwave Technology
Keywords: SIW Band-pass filter Magic T
CLC: TN61
Type: Master's thesis
Year: 2007
Downloads: 252
Quote: 1
Read: Download Dissertation
Abstract
|
SIW (Substrate Integrated Waveguide, SIW ) is a recent years a new type of microwave transmission structure , can be widely used in the microwave and millimeter wave circuit . It combines a number of advantages of the rectangular waveguide and microstrip line : traditional rectangular waveguide integrated waveguide has a high quality factor and small radiation loss ; And it is the microstrip line with a small size , light weight , processing and integration advantages . The substrate integrated waveguide basic concept is the use of the substrate upper and lower metal plates and two rows of spaced apart metal hole constituting the metal walls of the waveguide , which corresponds to the internal filling medium rectangular metal waveguide , it is possible to achieve with ordinary rectangular waveguide The structure can be used substrate integrated waveguide to achieve, such as antennas, filters , splitters , directional couplers, diplexers . The paper first analyzes the design of substrate integrated waveguide and microstrip converter , using the equivalent model and HFSS software combined microstrip gradient line converter rapid design method . The the traditional waveguide filter design method is applied to the substrate integrated waveguide structure , design and test processing center frequency of 14.25 GHz , the relative bandwidth of 3.5% of the substrate integrated waveguide plated through hole band-pass filter , while the introduction of media pin group SIW SIW media pin band-pass filter is designed . Analysis of the characteristics of the substrate integrated waveguide HT and ET and double-T connector , and the substrate integrated waveguide HT joint processing test . Substrate integrated waveguide HT and ET and the analysis of the double-T connector substrate integrated waveguide magic T , and discusses the features and port match substrate integrated waveguide magic T , gives the design method of matching components .
|
Related Dissertations
- The Design of SIW Resonate Cavity and the Apply of Microwave Material’s Measure,TM931
- Study on Cascade Techniques for Substrate Integrated Waveguide Dual-mode Filters,TN713
- Gothic Technique in Harry Potter Series,I561.078
- On Frida painting art of magic realism,J205
- Magic of Magritte’s Surrealist Painting Style,J205
- Research of Sensitive Information Protection Techniques for Automated Trust Negotiation,TP309
- The Reality and the Evil Spirit Imaginary Construct Four-dimensional Space,I313.074
- Split ring resonator and its application in microstrip filter,TN713
- Design of LTCC Microwave Bandpss Filter and Performance Research,TN713
- Coaxial cavity bandpass filter with,TN713.5
- The Design of RF Front-end of Zigbee Terminal,TN929.5
- Reference and Transformation: A Comparative Analysis of "Thunder" and Classical Greek Tragedies Paradigm,I207.3
- Study on Microwave Filter Design and Its Characteristics Based on LTCC Technology,TN713
- Research on X Band Substrate Integrated Waveguide Slot Array Antennas,TN823.24
- Microwave / millimeter wave delay line,TN812
- Blended learning model based on the Moodle platform General technical courses,G633.67
- Malamud short story of the suffering subject analysis,I712
- Research of A Uhf Microwave Diplexer,TN631.2
- Brief Discussion Maji La Jane and can break camp,B946
- Millimeter-wave receiver front-end research,TN851
- Miniaturized microwave receiving components,TN62
CLC: > Industrial Technology > Radio electronics, telecommunications technology > Electronic components, assemblies > Microwave components, microwave ferrite components
© 2012 www.DissertationTopic.Net Mobile
|