Dissertation > Excellent graduate degree dissertation topics show
Design and Implementation of Interface IP Core for CAN Bus Controller
Author: HuXiaoGuo
Tutor: WangLianMing
School: Northeast Normal University
Course: Circuits and Systems
Keywords: CAN Bus IP Core SOPC MCP2515
CLC: TP273
Type: Master's thesis
Year: 2011
Downloads: 84
Quote: 0
Read: Download Dissertation
Abstract
|
Controller Area Network is one of the most important field buses, a kind of serial communication network that effectively supports the distributed control system.CAN is a distributed control field bus developed by a Germany company called Bosch in 1980s, looking forward to solving the problem of the data communication between control system and test instruments in automobile industry. CAN gradually draws the attention of the application markets for its high-performance, high-reliability and unique design. At present, it has been widely used in the field of automobile industy, medical equipment, industrial automation and security.Firstly, this paper starts from the background of CAN, and then briefly introduces its features and the current market-applied situation, comes up with the defination of IP core and its tendency at home and abroad. Taking the need of CAN and the application prospects of IP core, resrearch direction is putting forward in this paper.Secondly, it introduces the technical specification of CAN 2.0 A, the SOPC technology as well as the certain definition of AVALON bus and its development. Among these, this paper emphasizes on the packet transmission types of CAN 2.0 and slave port transmission of AVALON bus.Thirdly, this paper elaborates the speciality, inside function of CAN controlled chip and the functional characteristics of peripheral circuit related chip. It focuses on the VHDL design process of IP core, especially on the internal design, timing analysis and packaging process of the CAN bus controller interface IP core in different working patterns.Finally, the achieved IP core for the CAN controller MCP2515 is tested.
|
Related Dissertations
- Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
- Development of GJB1188A Bus Signal Monitoring and Recording Device,V248.2
- The Design and Optimization of Locomotive Signal Testing System Based on ARM9,U284.91
- Study on the Locomotive Dynamic Supervision System,U284.48
- The Inductive Load Based Vehicle Body Network Control System,U463.6
- The Study of Control Algorithm for Automotive Power Window Based on Lin Bus,U463.6
- Research on Induction Motor Vector Control System Adapting Multi-Bus Communication Mode,TM346
- Design of Wearable Computer’ Multiprocessor Based on SOPC,TP332
- Research on Key Technologies of Automatic Steel Wire Galvanizing Production Line Based on Gas Reduction Method,TQ153.15
- Development of Tractor’s Virtual Instrument System Based on CAN Bus,S219.02
- CAN bus technology in the meteorological monitoring System Research and Implementation,P409
- Design of a Mine Smart Sensor Network Based on M-Bus,TP212.9
- Storage System Design in Solid State Disk Based PCI Express Interface,TP333
- The Design of FDM Networked Control System Based on CAN Bus and Realization of G Code,TP273
- Based on SOPC highly integrated network monitoring system design,TP277
- Remote Diagnostic & Monitoring System Design and Development for Testing Prototype Vehicles,U472.9
- Research on Monitoring and Control System of Substation Under the Coal Mine,TM764
- The Realization of FPC Production Equipment’s Visual System on SOPC,TP391.41
- Design of Monitoring and Alarm System of Ship Engine Room,TP277
- Development and Application of Electronic Vehicle Controller Unit for a Hybrid Electric City Bus,U469.7
- Research on High-Performance Computer I/O Bus,TP336
CLC: > Industrial Technology > Automation technology,computer technology > Automation technology and equipment > Automation systems > Automatic control,automatic control system
© 2012 www.DissertationTopic.Net Mobile
|