Dissertation > Excellent graduate degree dissertation topics show

Preparation of Honeycomb Fabric/Polyvinyl Chloride Composites and Sound Insulation Properties

Author: YangTianBing
Tutor: FuYaQin
School: Zhejiang University of Technology
Course: Materials Processing Engineering
Keywords: Honeycomb fabric Polyvinyl chloride Composite material Sound insulation property
CLC: TB332
Type: Master's thesis
Year: 2011
Downloads: 105
Quote: 0
Read: Download Dissertation

Abstract


In this paper, first the renewable natural cotton fiber with hollow structure was used as raw material to weave honeycomb fabric with different repetition. Then in order to study the influence of honeycomb structure to the sound insulation of the composites, the honeycomb fabric/PVC composites sound insulating material was made with the honeycomb fabric as reinforcement material and particle modified polyvinyl chloride as matrix. The purpose of this paper is to increase the sound insulation of the composites by changing the fabric structure while keeping the surface density and fiber content unchanged, which can be theoretically helpful to the preparation of composites with high property.First of all, the honeycomb fabrics with different repetition were produced with 58.31 tex *2 cotton yarn as Warp and Weft and the mechanical property, air permeability, and sound insulation performance of the fabrics were tested. It was shown that with the density approximately the same, weave repetition of fabrics had significant influence on breaking tenacity, breaking elongation and sound insulation of honeycomb fabrics and with the increasing of repetition, sound insulation of fabrics decreased significantly. On the basis of this, HNTs modified PVC with low price but favorable dispersion performance was used as matrix to study different content of HNTs on PVC mechanical, damping and sound insulating performance. The results was that when HNTs is 8wt%, this composite materials had better mechanical, damping property and improved sound insulating performance.Secondly, honeycomb fabric/PVC composite materials were made with honeycomb fabric of different repetition as reinforcement material and HNTs modified PVC as matrix to study effect of repetition on sound insulating performance of honeycomb fabric/PVC composites. It was shown that the weave repetition had great influence on the composites material sound insulation. If coated two-side, when R was 6, the sound insulation of composite materials was the best. If casted front side, the more the weave repetition was, the better the effect of sound insulation was. While the fabric was casted back side, repetition of weave in middle and low frequency had little effect on sound insulation and when the fabric was coated two-side, repetition of weave had little effect on composite material.Thirdly, composite materials with sandwich structure were made with honeycomb fabric/PVC composites as core to study the influence of weave repetition on sound insulation property of composite materials. It was shown that When R=6, good sound insulation in low frequency, while in R=14, the composite structure displayed good insulation property in high frequencyFinally, two composite materials whose R=6 and R=14 were laminated to study the influence of arrangement form on sound insulating performance. It was shown that the arrangement form had great influence on sound insulating performance of two-layer-composite structure and the performance of two-layer-frontage structure surpassed that of other arrangement form.

Related Dissertations

  1. The high fill SSP material PVC - based flexible sound insulation composite materials,TB34
  2. Properties on Aramid 1313 Fabric and the Compound Silastic Rubber Composite Material with This Fabric,TB332
  3. Research on the Solid Solution and Composite of Double Ionic Substitute Negative Thermal Expansion Compound Zr1-xAlxMoW1-y VyO8,TB34
  4. Mechanical Properties Analysis and Optimum Design of the Super-span Suspension Bridge with CFRP Cables,U448.25
  5. Effects of the Coating on the Properties of Electro-Magneto-Elastic Composites,O343.7
  6. Preparation based on numerical simulation of glass / aluminum composite stirrer waste structural studies,TB333
  7. Diamond / Cu composites research,TB333
  8. Optimization Design of Reinforced Structural for Sheared Ringent Composite Laminate,TB33
  9. Study on Manganese Dioxide as Electrodes Material for Supercapacitor,O614.711
  10. Prepared the Electrode Material and Electrochemical Properties of Lithium-ion Battery,TM912
  11. Preparation and Modification Research of Cathode Material Li3V 2（PO4）3 Using Sol-gel Method,TM912.9
  12. Wood and plastic composite material of furniture in the application of outdoor furniture,TS664
  13. Research on the Preparation and Properties of Al3Tip/Mg Composite Materials,TF125
  14. Experimental Research and Analysis of Acoustic Property for Aluminum Foam Composite Structure,TB383.4
  15. Design and Simulation of Composite Autoclave Process Based on Case,TB33
  16. Preparation and Properties for Al2TiO5-AlN-Al Composite Material,TB333
  17. Synthesis and Characterization of Nano-TiO2 Composite Materials with Visible Light Response Activity,TB383.1
  18. Analysis of the Model and Mechanical Property of Three-Dimensional Four-Directional Braided Composites,TB332
  19. CPVC / ABS structure and properties of,TQ325.2
  20. Porphyrin Bonded Organic-inorganic Materials and Their Optical Properties,O437
  21. The Manufacture of Short-Carbon-Fiber Reinforced Aluminum Matrix Composites by Stirring Melt Casting,TB331

CLC: > Industrial Technology > General industrial technology > Materials science and engineering > Composite materials > Non-metallic composite materials
© 2012 www.DissertationTopic.Net  Mobile