Dissertation > Excellent graduate degree dissertation topics show

Design of Testing Equipment for Electronic Products

Author: ZhengKai
Tutor: CuiXianYu
School: Harbin Institute of Technology
Course: Mechanical and Electronic Engineering
Keywords: Automatic test equipment Mechanical Design Finite Element Analysis Signal processing Wavelet Denoising Counting method
Type: Master's thesis
Year: 2011
Downloads: 8
Quote: 0
Read: Download Dissertation


Combustible gas alarm is the device that could monitor the concentration of combustible gases in the air automatically. It could performance stably with a compact structure, and it consumes little power. The circuit board, which is the most important component of the alarm, need to be inspected to ensure the quality of the product in production process. At present, the monitoring equipment of the circuit board is usually special for the product domestic and abroad, which is also very expensive. This paper designs an auto testing equipment for combustible gas alarm which could finish positioning, clamping and testing. This testing equipment costs lowly and is maintained easily. It is very suitable for on line testing rapidly.This paper includes the design of the positioning and clamping mechanism for the circuit board firstly. The size of the key parts of the structure is determined by dynamic analysis of the device. And appropriate driving components are selected suitably. The finite element analysis of the key components is finished through simulation software. That is to ensure the carrying capacity of parts and security of operation. Finally the structure of the parts that can’t bear the maximum stress is optimized for normal operation. This analysis process is very necessary for safe and stable operation of the equipment.A microcontroller is used as the core of the testing and motion control system which could acquire signal of the tested node, judge the results of the node, and it also controls the motion of the lifting and clamping mechanism. The system includes a communication interface, and this left the opportunities for function expansion and further analysis of the testing result in the future. Many experiments are applied to analyze the performance of the hardware system, and it could also determine the parameters of many electronic components. According to the working process of the testing and control system, the software is designed to complete test tasks successfully through many repeated debugging.At last the paper studies the methods of digital signal processing. Testing signal usually includes some noise. Method based on wavelet analysis is used to process the testing signal. The paper chooses a suitable method of wavelet analysis through many experiments. The method this paper applied is of many advantages compared with other methods. Counting method is combined with median method so that the interference of the signal could be ignored to ensure that the testing results are accurate.

Related Dissertations

  1. Research on the Mainframe System of Powder Mixed EDM and the Craft Experiment,TG661
  2. EDM Electrode Wear Mechanism and Control Research,TG661
  3. Finite Element Analysis and Structure Optimal Design for Combined Seal at Normal Temperature and Low Temperature,TH136
  4. Research on Electromagnetic Acoustic Transducer Detection System Based on FPGA,TH878.2
  5. Study of Data Generation for MMW Radar IF Simulated Signal Source,TN955
  6. Study on the Design and Biomechanical Behaviors of Individualized Artificial Knee Joint,R318.1
  7. Design and Implementation of Processor TI DSP VC33 Virtual Kernel,TP332
  8. Design of Receiving Processor on Radio Signal and Multi-Rate,TN851
  9. MATLAB for post-processing in the radar signal processor system simulation applications,TN957.51
  10. Multi-pin Internal Fixation of Calcaneal Fractures in Finite Element Analysis,R687.3
  11. Airborne radar antenna pedestal rapid design systems research and development,TN959.73
  12. Sham hose drum drive means and hydraulic system of the structure,TE973
  13. The magnetorheological damper mechanical properties and Gun Recoil,TB535.1
  14. Nonlinear Structural Dynamics Analysis and Optimization Design on Naval Gun Driver,TJ391
  15. Application of AWG in Decoy Protection Equipment,TN97
  16. Design and Analysis of Automatic Steel Pipes Butt Tool,U673.38
  17. Analysis on Unloading of Large Span Steel Structures and Research on Its Mechanical Analysis,TU391
  18. Research Implementation of Crack Detection Method Based on Its Acoustic Property,TP274
  19. Second-order Circulation Statistics-based Array Signal Processing,TN911.7
  20. Simulation of the Clinching Process Using FEA Method with Steel and Aluminum Alloy Sheets for Automotive Sunroof Frame,U463.83

CLC: > Industrial Technology > Radio electronics, telecommunications technology > General issues > Test technology and equipment
© 2012 www.DissertationTopic.Net  Mobile