Dissertation > Excellent graduate degree dissertation topics show

Research on Plasma in High Power CO2 Laser Welding of Domain Ship Plate

Author: ZhaoLiangLei
Tutor: LiZhuGuo
School: Shanghai Jiaotong University
Course: Materials Processing Engineering
Keywords: High power laser welding Plasma High speed photograph welding processing Side shilding gas
CLC: TG456.7
Type: Master's thesis
Year: 2008
Downloads: 155
Quote: 1
Read: Download Dissertation

Abstract


Plasma in CO2 laser welding influencs the welding process stability and welding joint quality. Especially in high power CO2 laser welding, because of the high input energy and laser density, the plasma is more active.With this as a reserch background, the thesis conducts a detailed study on the plasma in high power CO2 laser welding of domainship plate based on the LabView image processing technology.Firstly, choosing the height of plasma image along the laser incident direction to represent the absorption. And selecting the area of plasma image to represent the plasma refraction.Secondly researching the influencing factor and the function of plasma in differernt welding parameters and conditions to obtain the following conclusion: （1） line energy is the crucial parameter. The plasma size could be controlled and welding process could be stable, when the line energy is appropriate. That is important to spread the high power laser welding. （2） In the problem usually happened during welding, workpieces decling and oversize gap are more disadvantageous than misalignment, oil and rust. （3） The plasme shape and size are changed unconspicuously in laser filler wire weldig.Finally, researching the shielding gas in different flow rate, nozzle position and gas component to get the following conclusion: （1） With the increasing flow rate, the plasma size is diminish. But when the flow over 40L/min, the change is small （2） The nozzle position is important to high power laser welding. X position may change in the range from -4 to +2mm, 02mm is recommended; The Y position must guarantee in the laser point; Z position should be in 815mm; Thenazzle angle maintains at 30o50o. （3） Compared with pure helium, when using the mix-gas （75%Ar+25%He）, the height of plasma is depressed and the area of plasma is increased, and could’t get the qualified welding joint. When using the mix-gas （60%Ar+40%He）, the welding joint quality and welding efficiency are accepted.

Related Dissertations

  1. Preparation and Tribological Properties of TZ3Y20A-SrSO4 Ceramic Matrix Composites,TB332
  2. Research on PSA/Cotton Blend Fabric of Coatinging of Water Resistance and Moisture Permeability,TS195.6
  3. Proteomic Research of Rice Plasma Membrane Protein under Blast Stress,S511
  4. Study on Ca2+/H+ Antiporter Avtivity and Its Gene Expression of Apple,S661.1
  5. Study on the Anesthestic Quality, Blood Concentration and Clinical Application of Shumianning Administered Intravenously by Continuous Rate Infusion Using Microinjection Pump in Dogs,R965
  6. Pharmacokinetics of Progesterone Cream in Beagle Dogs Determined with LC-MS/MS,R96
  7. Study on the Screening and Properties of Degradation Coking Waste Water Advantage Strains,X172
  8. Studies on the Interaction between Biomolecules by Surface Plasmon Resonance Technology and Fluorescence Spectrometry,Q503
  9. Isolation and Cultivation of Rabbit Adipose-derived Stem Cells and the Influence of Platelet-rich Plasma on the Cell Proliferation,R329
  10. Variation of Immune System and Clinical Experiment Indicators in Patients with Gastric Cance and Its Association with 15 STR Loci,R735.2
  11. Domestic isoflurane inhalation anesthesia effect depends on learning and memory in adult rats related research,R965
  12. Cancer patients before and after chemotherapy changes in blood glucose and glycosylated hemoglobin,R587.1
  13. Investigation of Plasma Sprayed NiCr-Cr3C2 Coating on Mould CrZrCu Alloy Plates,TG174.442
  14. Direct PCR from Plasma on Chip and Establishment of a Microfluidic Chemiluminescence SNP Analytical System,R440
  15. Effects of Risperidone and Aripiparzole on Glucose, Lipid and Plasma Cytokine Levels in Schizophrenic Patients,R749.3
  16. Preparation and Luminous Property of Tm and Dy Doped YSZ Coating,TG174.442
  17. Preparation and Characterization of W Coatings Prepared by Low Pressure Plasma Spraying,TG174.44
  18. Experimental Research on the Degradation of Basic Fuchsin with DBD Plasma-Activated Carbon,X703
  19. Sterilization of atmospheric pressure plasma jet and its,O539
  20. Research on linear plasma jet,O53
  21. Degradation of dielectric barrier discharge combined with studies of gaseous benzene,O621.2

CLC: > Industrial Technology > Metallurgy and Metal Craft > Welding, metal cutting and metal bonding > Welding process > Special welding > Laser welding
© 2012 www.DissertationTopic.Net  Mobile